SIPLUS SM 1222 digital output modules . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS SM 1222 digital output modules

| | | | | |

SIPLUS SM 1222 digital output module

Article number	6AG1222-1BF32-2XB0	6AG1222-1BF32-4XB0	6AG1222-1BH32-2XB0	6AG1222-1BH32-4XB0
	SIPLUS S7-1200 SM 1222 8DQ	SIPLUS S7-1200 SM 1222 8DQ	SIPLUS S7-1200 SM 1222 16DQ	SIPLUS S7-1200 SM 1222 16DQ
General information
Product type designation	SM 1222 DQ 8x24VDC	SM 1222 DQ 8x24VDC	SM 1222 DQ 16x24VDC	SM 1222 DQ 16x24VDC
Input current
from backplane bus 5 V DC, max.	120 mA	120 mA	140 mA	140 mA
Power loss
Power loss, typ.	1.5 W	1.5 W	2.5 W	2.5 W
Digital outputs
Number of digital outputs	8	8	16	16
? in groups of	1	1	1	1
Short-circuit protection	No; to be provided externally	No; to be provided externally	No; to be provided externally	No; to be provided externally
Limitation of inductive shutdown voltage to	typ. (L+) -48 V	typ. (L+) -48 V	typ. (L+) -48 V	typ. (L+) -48 V
Switching capacity of the outputs
? with resistive load, max.	0.5 A	0.5 A	0.5 A	0.5 A
? on lamp load, max.	5 W	5 W	5 W	5 W
Output voltage
? Rated value (DC)	24 V	24 V	24 V	24 V
? for signal "0", max.	0.1 V; with 10 kOhm load	0.1 V; with 10 kOhm load	0.1 V; with 10 kOhm load	0.1 V; with 10 kOhm load
? for signal "1", min.	20 V DC	20 V DC	20 V DC	20 V DC
Output current
? for signal "1" rated value	0.5 A	0.5 A	0.5 A	0.5 A
? for signal "0" residual current, max.	10 µA	10 µA	10 µA	10 µA
Output delay with resistive load
? "0" to "1", max.	50 µs	50 µs	50 µs	50 µs
? "1" to "0", max.	200 µs	200 µs	200 µs	200 µs
Total current of the outputs (per group)
horizontal installation
— up to 50 °C, max.	4 A; Current per mass	4 A; Current per mass	8 A; Current per mass	8 A; Current per mass
Relay outputs
Switching capacity of contacts
— with inductive load, max.	0.5 A	0.5 A	0.5 A	0.5 A
— on lamp load, max.	5 W	5 W	5 W	5 W
— with resistive load, max.	0.5 A	0.5 A	0.5 A	0.5 A
Cable length
? shielded, max.	500 m	500 m	500 m	500 m
? unshielded, max.	150 m	150 m	150 m	150 m
Interrupts/diagnostics/status information
Alarms	Yes	Yes	Yes	Yes
Diagnostic functions	Yes	Yes	Yes	Yes
Alarms
? Diagnostic alarm	Yes	Yes	Yes	Yes
Diagnostic messages
? Monitoring the supply voltage	Yes	Yes	Yes	Yes
Diagnostics indication LED
? for status of the outputs	Yes	Yes	Yes	Yes
? for maintenance	Yes	Yes	Yes	Yes
Potential separation
Potential separation digital outputs
? between the channels, in groups of	1	1	1	1
? between the channels and backplane bus	500 V AC	500 V AC	500 V AC	500 V AC
Degree and class of protection
Degree of protection acc. to EN 60529
? IP20	Yes	Yes	Yes	Yes
Standards, approvals, certificates
CE mark	Yes	Yes	Yes	Yes
Ambient conditions
Free fall
? Fall height, max.	0.3 m; five times, in product package	0.3 m; five times, in product package	0.3 m; five times, in product package	0.3 m; five times, in product package
Ambient temperature during operation
? min.	-40 °C; = Tmin; Startup @ -25 °C	-20 °C; = Tmin; Startup @ 0 °C	-40 °C; = Tmin; Startup @ -25 °C	-20 °C; = Tmin; Startup @ 0 °C
? max.	70 °C; = Tmax; Tmax > +60 °C number of simultaneously activated outputs 4 (no adjacent points) for horizontal mounting position	60 °C; = Tmax	70 °C; = Tmax; Tmax > +60 °C number of simultaneously activated outputs 8 (no adjacent points) for horizontal mounting position	60 °C; = Tmax
Extended ambient conditions
? relative to ambient temperature-atmospheric pressure-installation altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
— against biologically active substances / conformity with EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Connection method
required front connector	Yes	Yes	Yes	Yes
Mechanics/material
Enclosure material (front)
? Plastic	Yes	Yes	Yes	Yes
Dimensions
Width	45 mm	45 mm	45 mm	45 mm
Height	100 mm	100 mm	100 mm	100 mm
Depth	75 mm	75 mm	75 mm	75 mm
Weights
Weight, approx.	180 g	180 g	220 g	220 g

Article number	6AG1222-1HF32-2XB0	6AG1222-1HF32-4XB0	6AG1222-1HH32-2XB0	6AG1222-1HH32-4XB0
	SIPLUS S7-1200 SM 1222 8DQ RLY	SIPLUS S7-1200 SM 1222 8DQ RLY	SIPLUS S7-1200 SM 1222 16DQ RLY	SIPLUS S7-1200 SM 1222 16DQ RLY
General information
Product type designation	SM 1222 DQ 8xRelay	SM 1222 DQ 8xRelay	SM 1222 DQ 16xRelay	SM 1222 DQ 16xRelay
Input current
from backplane bus 5 V DC, max.	120 mA	120 mA	135 mA	135 mA
Digital outputs
? from load voltage L+, max.	11 mA/relay coil	11 mA/relay coil	11 mA/relay coil	11 mA/relay coil
Power loss
Power loss, typ.	4.5 W	4.5 W	8.5 W	8.5 W
Digital outputs
Number of digital outputs	8	8	16	16
? in groups of	2	2	1	1
Short-circuit protection	No; to be provided externally	No; to be provided externally	No; to be provided externally	No; to be provided externally
Switching capacity of the outputs
? with resistive load, max.	2 A	2 A	2 A	2 A
? on lamp load, max.	30 W with DC, 200 W with AC	30 W with DC, 200 W with AC	30 W with DC, 200 W with AC	30 W with DC, 200 W with AC
Output voltage
? Rated value (DC)	5 V DC to 30 V DC	5 V DC to 30 V DC	5 V DC to 30 V DC	5 V DC to 30 V DC
? Rated value (AC)	5 V AC to 250 V AC	5 V AC to 250 V AC	5 V AC to 250 V AC	5 V AC to 250 V AC
Output current
? for signal "1" permissible range, max.	2 A	2 A	2 A	2 A
Output delay with resistive load
? "0" to "1", max.	10 ms	10 ms	10 ms	10 ms
? "1" to "0", max.	10 ms	10 ms	10 ms	10 ms
Total current of the outputs (per group)
horizontal installation
— up to 50 °C, max.	10 A; Current per mass	10 A; Current per mass	10 A; Current per mass	10 A; Current per mass
Relay outputs
? Number of relay outputs	8	8	16	16
? Rated supply voltage of relay coil L+ (DC)	24 V	24 V	24 V	24 V
? Number of operating cycles, max.	mechanically 10 million, at rated load voltage 100 000	mechanically 10 million, at rated load voltage 100 000	mechanically 10 million, at rated load voltage 100 000	mechanically 10 million, at rated load voltage 100 000
Switching capacity of contacts
— with inductive load, max.	2 A	2 A	2 A	2 A
— on lamp load, max.	30 W with DC, 200 W with AC	30 W with DC, 200 W with AC	30 W with DC, 200 W with AC	30 W with DC, 200 W with AC
— with resistive load, max.	2 A	2 A	2 A	2 A
Cable length
? shielded, max.	500 m	500 m	500 m	500 m
? unshielded, max.	150 m	150 m	150 m	150 m
Interrupts/diagnostics/status information
Alarms	Yes	Yes	Yes	Yes
Diagnostic functions	Yes	Yes	Yes	Yes
Alarms
? Diagnostic alarm	Yes	Yes	Yes	Yes
Diagnostic messages
? Monitoring the supply voltage	Yes	Yes	Yes	Yes
Diagnostics indication LED
? for status of the outputs	Yes	Yes	Yes	Yes
? for maintenance	Yes	Yes	Yes	Yes
Potential separation
Potential separation digital outputs
? between the channels	Relay, dry contact	Relay, dry contact	Relays	Relay, dry contact
? between the channels, in groups of	2	2	4	4
? between the channels and backplane bus	1500 V AC for 1 minute	1500 V AC for 1 minute	1500 V AC for 1 minute	1500 V AC for 1 minute
Permissible potential difference
between different circuits	750 V AC for 1 minute	750 V AC for 1 minute	750 V AC for 1 minute	750 V AC for 1 minute
Degree and class of protection
Degree of protection acc. to EN 60529
? IP20	Yes	Yes	Yes	Yes
Standards, approvals, certificates
CE mark	Yes	Yes	Yes	Yes
Ambient conditions
Free fall
? Fall height, max.	0.3 m; five times, in product package	0.3 m; five times, in product package	0.3 m; five times, in product package	0.3 m; five times, in product package
Ambient temperature during operation
? min.	-40 °C; = Tmin; Startup @ -25 °C	-20 °C; = Tmin; Startup @ 0 °C	-40 °C; = Tmin; Startup @ -25 °C	-20 °C; = Tmin; Startup @ 0 °C
? max.	70 °C; = Tmax; Tmax > +60 °C number of simultaneously activated outputs 4 (no adjacent points) for horizontal mounting position	60 °C; = Tmax	70 °C; = Tmax; Tmax > +60 °C number of simultaneously activated outputs 8 (no adjacent points) for horizontal mounting position	60 °C; = Tmax
Extended ambient conditions
? relative to ambient temperature-atmospheric pressure-installation altitude	Tmin ... Tmax at 1 080 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax - 20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m); from 2 000 m max. 132 V AC	Tmin ... Tmax at 1 080 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax - 20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m); from 2 000 m max. 132 V AC	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
? At cold restart, min.	-25 °C
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
— against biologically active substances / conformity with EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Connection method
required front connector	Yes	Yes	Yes	Yes
Mechanics/material
Enclosure material (front)
? Plastic	Yes	Yes	Yes	Yes
Dimensions
Width	45 mm	45 mm	45 mm	45 mm
Height	100 mm	100 mm	100 mm	100 mm
Depth	75 mm	75 mm	75 mm	75 mm
Weights
Weight, approx.	190 g	190 g	260 g	260 g

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания