IE/WSN-PA Link . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на IE/WSN-PA Link

| | | | | | | | | |

IE/WSN-PA Link

Order number	6GK1411-6CA40-0AA0	6GK1411-6CA40-0BA0
Product type designation	IE/WSN-PA LINK	IE/WSN-PA LINK
Transmission rate
Transfer rate
? at the 1st interface	10 ... 100 Mbit/s	10 ... 100 Mbit/s
? at the 2nd interface	10 ... 100 Mbit/s	10 ... 100 Mbit/s
? at interface 3	9.6 ... 57.6 kbit/s	9.6 ... 57.6 kbit/s
Interfaces
Number of electrical connections
? at the 1st interface acc. to Industrial Ethernet	1	1
? at the 2nd interface acc. to Industrial Ethernet	1	1
? at interface 3 acc. to RS 485	1	1
? for power supply	1	1
Type of electrical connection
? at the 1st interface acc. to Industrial Ethernet	RJ45 port	RJ45 port
? at the 2nd interface acc. to Industrial Ethernet	RJ45 port	RJ45 port
? at interface 3 acc. to RS 485	2-pole terminal strip	2-pole terminal strip
? for power supply	3-pole terminal strip	3-pole terminal strip
Interfaces wireless
Number of radio cards permanently installed	1	1
Number of internal antennas	1	0
Number of electrical connections for external antenna(s)	0	1
Type of electrical connection for external antenna(s)	-	N-Connector
Supply voltage, current consumption, power loss
Type of voltage supply	DC	DC
Supply voltage external	24 V	24 V
Supply voltage external	20 ... 28 V	20 ... 28 V
Type of voltage of the supply voltage	DC	DC
Consumed current from external supply voltage at DC at 24 V maximum	0.5 A	0.5 A
Power loss [W] maximum	12 W	12 W
Permitted ambient conditions
Ambient temperature
? during operation	-40 ... +70 °C	-40 ... +70 °C
? during storage	-40 ... +85 °C	-40 ... +85 °C
? during transport	-40 ... +85 °C	-40 ... +85 °C
Relative humidity at 25 °C without condensation during operation maximum	90 %	90 %
Protection class IP	IP 65	IP 65
Design, dimensions and weight
Width of the enclosure	229 mm	229 mm
Height of the enclosure
? without antenna	306 mm	306 mm
? with antenna	354 mm	354 mm
Depth of the enclosure	89 mm	89 mm
Net weight	4.54 kg	4.54 kg
Mounting type	Material for mast mounting included in scope of delivery	Material for mast mounting included in scope of delivery
? wall mounting	Yes	Yes
? mast mounting	Yes	Yes
Wireless frequencies
Operating frequency for WirelessHART in 2.4 GHz frequency band	2.4 ... 2.5 GHz	2.4 ... 2.5 GHz
Performance data WirelessHART
Number of WirelessHART devices usable	100	100
Network latency
? at 100 field devices for WirelessHART network maximum	10 s	10 s
? for 50 field devices for WirelessHART network maximum	5 s	5 s
Transmission link between two devices for WirelessHART network maximum	100 m	100 m
? Note	Values may vary in the case of radio obstacles	Values may vary in the case of radio obstacles
Protocol is supported HART protocol	Yes	Yes
Product properties, functions, components general
Protocol is supported
? Address Resolution Protocol (ARP)	Yes	Yes
? HTTP	Yes	Yes
? HTTPS	Yes	Yes
? Modbus TCP	Yes	Yes
? Modbus TCP secure	Yes	Yes
? Modbus RTU	Yes	Yes
Product functions management, configuration
Product function
? web-based management	Yes	Yes
? DHCP client	Yes	Yes
Product functions Diagnosis
Product function
? Web-based diagnostics	Yes	Yes
? WirelessHART diagnostics via Modbus	Yes	Yes
Product functions Redundancy
Product function Device redundancy	No	Yes
Product functions Security
Product function
? Password protection - multi-level	Yes	Yes
? WirelessHART Join Key	Yes	Yes
? ACL - MAC-based	Yes	Yes
? WirelessHART Network ID	Yes	Yes
Protocol is supported SSL	Yes	Yes
Principle of encryption	AES 128 bit	AES 128 bit
Product functions Time
Protocol is supported NTP	Yes	Yes
Standards, specifications, approvals
Standard for WirelessHART	HART V 7.1	HART V 7.1
Standard for wireless communication IEEE 802.15.4	Yes	Yes
Certificate of suitability
? CE marking	Yes	Yes
? relating to CSA	CSA Division 2 & Dust Ignition-proof for Class I, Division 2, Groups A, B, C, and D. Dust Ignition-proof for Class II, Groups E, F, and G / Suitable for Class III Hazardous Locations. / Install per Siemens drawing A5E02467236A. Temperature Code: T4 (-40°C < Ta < 60°C) CSA Enclosure Type 4X	CSA Division 2 & Dust Ignition-proof for Class I, Division 2, Groups A, B, C, and D. Dust Ignition-proof for Class II, Groups E, F, and G / Suitable for Class III Hazardous Locations. / Install per Siemens drawing A5E02467236A. Temperature Code: T4 (-40°C < Ta < 60°C) CSA Enclosure Type 4X
? relating to FM	FM Division 2, Non-Incendive for Class I, Division 2, Groups A, B, C, and D. Dust Ignition-proof for Class II, III, Division 1, Groups E, F, and G / Indoor and outdoor locations / NEMA Type 4X Temperature Code: T4 (-40°C < Ta < 60°C)	FM Division 2, Non-Incendive for Class I, Division 2, Groups A, B, C, and D. Dust Ignition-proof for Class II, III, Division 1, Groups E, F, and G / Indoor and outdoor locations / NEMA Type 4X Temperature Code: T4 (-40°C < Ta < 60°C)
? relating to ATEX	ATEX type n, see note: Certificate number: Baseefa10ATEX0044X, ATEX marking: Ex II 3 G, Ex nA nL IIC T4 (-40 °C <= Ta <= 60 °C), rated voltage: 28 V, ATEX dust ignition-proof: Certificate number: Baseefa10ATEX0045X, ATEX marking: II 3 D, Ex tD A22 IP66 T135 (-40 °C <= Ta <= 60 °C), rated voltage: 28 V. Note on type n: Conditions for safe handling during installation. The device does not pass the 500 V insulation test in accordance with paragraph 6.8.1 of EN 60079-15:2005. This must be taken into account when the device is mounted.	ATEX type n, see note: Certificate number: Baseefa10ATEX0044X, ATEX marking: Ex II 3 G, Ex nA nL IIC T4 (-40 °C <= Ta <= 60 °C), rated voltage: 28 V, ATEX dust ignition-proof: Certificate number: Baseefa10ATEX0045X, ATEX marking: II 3 D, Ex tD A22 IP66 T135 (-40 °C <= Ta <= 60 °C), rated voltage: 28 V. Note on type n: Conditions for safe handling during installation. The device does not pass the 500 V insulation test in accordance with paragraph 6.8.1 of EN 60079-15:2005. This must be taken into account when the device is mounted.
? relating to IECEx	IECEx Type n, see note: Certificate number: IECEx BAS 10.0014X, Ex nA nL IIC T4 (-40 °C <= Ta <= 60 °C), rated voltage: 28 V, ATEX dust ignition-proof, see note: Certificate number: IECEx BAS 10.0015X, Ex tD A22 IP66 T135 (-40 °C <= Ta <= 60 °C), rated voltage: 28 V. Note on type n: Conditions for safe handling during installation. The device does not pass the 500 V insulation test in accordance with paragraph 6.8.1 of EN 60079-15:2005. This must be taken into account when the device is mounted.	IECEx Type n, see note: Certificate number: IECEx BAS 10.0014X, Ex nA nL IIC T4 (-40 °C <= Ta <= 60 °C), rated voltage: 28 V, ATEX dust ignition-proof, see note: Certificate number: IECEx BAS 10.0015X, Ex tD A22 IP66 T135 (-40 °C <= Ta <= 60 °C), rated voltage: 28 V. Note on type n: Conditions for safe handling during installation. The device does not pass the 500 V insulation test in accordance with paragraph 6.8.1 of EN 60079-15:2005. This must be taken into account when the device is mounted.
Wireless approval	FCC and IC approval	IC approval

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания