Extended diagnostics/alarms via Ethernet, e-mail, SMS and for direct infeed into the SIMATIC software via OPC and logging (optionally via SIMATIC PC DiagMonitor):
Runtime meter
Hard disk status
Automatic logging of all alarms by means of a log file
Long-term recording and graphic display of measured values (temperature, fan)
Capability for central monitoring of networked SIMATIC PCs
RAID1 for automatic data mirroring on two serial ATA hard disks
Flash drive, via CompactFlash card or solid-state drive accessible from outside, for especially rugged data storage and systems without hard drive
AMT functionality (Intel Active Management Technology). This feature allows remote access to the IPC (for service work, for example) even with shut down operating systems, e.g.:
Controlled startup/shutdown of the IPC
Access to BIOS settings and BIOS update
Measures by means of remote access in the event of a fault, e.g. reboot
Software updates from integrated ISO image
CMOS batteries are externally accessible and therefore easily replaced
Flash BIOS with the ability to store customer-specific CMOS settings in a non-volatile memory area
The PROFINET and PROFIBUS versions offer 2 MB of battery-backed SRAM for application data
After an unexpected power interruption, up to 128 KB of important process data can be written to the battery-backed SRAM
Two 7-segment displays (Port 80) for the power-up display and for customer outputs (user-programmable)
Two 2-color LEDs (green/red) for the indication of status messages (user-programmable)
