Selection and ordering data

The following table lists recommendations for additional line-side components, such as fuses and circuit breakers.

Note for use in compliance with IEC standards:

3NA3 type fuses and 3RV type circuit breakers are recommended for European countries. The values in the table take into account the overload capability of the inverter.

Notes for use in compliance with UL regulations:

Fuses for use in North America must be UL-certified, Class J fuses with a rated voltage of 600 V AC.

Short Circuit Current Rating (SCCR)
according to UL

Applies to industrial control panel installations according to NEC Article 409 or UL 508A

• SINAMICS G110D: 40 kA

Additional information about the listed fuses and circuit breakers can be found in Catalogs LV 10, IC 10 and IC 10 AO.

Individual protection

¹⁾ It is not possible to make any assignment to a particular standard.

Group protection (installation on power bus)

For installations with several inverters, the inverters are normally supplied from a 400 V power bus.

Further information can be found in the operating instructions at 
http://www.siemens.com/sinamics-g110d/documentation

Information about UL-compliant group protection for applications in North America can be found on the Internet at 
http://support.automation.siemens.com/WW/view/en/35935349/130000