SIMATIC IPC427C

General features

Design

DIN rail or wall mounting, front upright mounting, mounting position preferably horizontal, vertical possible

Processor

• Intel Core2 Duo 1.2 GHz, 800 MHz FSB, 3 MB SLC
• Intel Core2 Solo 1.2 GHz, 800 MHz FSB, 3 MB SLC
• Intel Celeron M 1.2 GHz, 800 MHz FSB, 1 MB SLC

Chipset

Intel GM45 / ICH9M

Main memory

1 GB, (2/4 GB) DDR3 SDRAM

Buffered SRAM

2 MB, of which 128 KB can be written within the buffer time

Free slots for expansions

Up to 3 x PCI-104, 3 W per slot

Graphics

• Integrated Intel GMAX4500 graphics
• 8 ... 512 MB shared graphics memory (managed dynamically)
• CRT resolution: 640 x 480 to max. 1920 x 1200 pixels with 32-bit color depth
• DVI-D resolution: 640 x 480 to max. 1920 x 1200 pixels with 32-bit color depth

Operating system

• without
• Windows XP Embedded Standard 2009 preinstalled, in combination with CF card of 2 GB or more, solid-state drive, or hard drive
• Windows XP Professional MUI (in combination with solid-state drive or hard drive; MUI: Multi Language User Interface)
• Windows 7 Ultimate MUI (in combination with solid-state drive or hard drive; MUI: Multi Language User Interface)
• Windows Embedded Standard 7 preinstalled, in combination with CF card of 4 GB or more, or solid-sate drive, or hard drive RMOS3 (can be ordered separately)
• Linux¹⁾ (project-specific, on request)
• Others on request project-specifically

Power supply

• 24 V DC (19.2 V ... 28.8 V)
• Isolated
• With buffering of temporary power failures: Max. 10 ms at 0.85% rated voltage
• Line side switch
• With power failure indication by means of Power Fail signal

Drives

Flash drive

Optional; replaceable, accessible, diagnosable

• 2 GB
• 4 GB
• 8 GB
• 16 GB

Optional; internal, not accessible, diagnosable

• 2 GB
• 4 GB
• 8 GB
• 16 GB

Solid-State Drive (SSD)

Optional

• 160 GB SATA, 2.5" in single-level cell (SLC) architecture, especially suitable for industrial applications
• 80 GB SATA, 2.5" Standard

Hard disk

Optional

• > 250 GB SATA

CD-ROM

Via USB (not included in scope of delivery)

DVD-RW

Via USB (not included in scope of delivery)

Diskette

Via USB (not included in scope of delivery)

Interfaces

PROFINET

3 x RJ45 (CP 1616-compatible, optional)

PROFIBUS/MPI

12 Mbit/s (isolated, compatible to CP 5611)
optional

Ethernet

• 2 x 10/100/1000 Mbit/s (RJ 45)
• Two independent Intel 82574L controllers (via PCI-Express)
• One controller with none-shared interrupt
• With teaming function

USB

V2.0/High Speed: 4 x

Serial

COM1 (V.24)
COM2 (V.24) optional (in expansion frame)

DVI-I

1 x DVI-I (includes DVI-D and VGA)

Keyboard

Via USB (not included in scope of delivery)

Mouse

Via USB (not included in scope of delivery)

Monitoring functions

Temperature

• Processor temperature
• Motherboard
• Messages can be evaluated by the application program

Watchdog

• Monitoring of program execution
• Monitoring time can be parameterized in software
• Can be parameterized for a fault or restart
• Messages can be evaluated by the application program.

Monitoring functions via the network

• DiagBase
• SIMATIC IPC DiagMonitor

Remote monitoring capability for:

• Watchdog
• Temperature
• Mass memory monitoring (SMART)
• System/Ethernet monitoring (Heart Beat)
• Runtime meter

Communication:

• Ethernet interface (SNMP protocol)
• OPC for integration in SIMATIC software
• Configuration of client/server architectures
• Layout of log files

Ambient conditions

Degree of protection to EN 60529 (front/rear)

IP20

Vibration load during operation

Devices without hard disk:

• Requirements according to: IEC 61131-2
• Tested according to: IEC 60068-2-6, Test Fc
• Devices without drive:
  
  • 5-9 Hz, 3.5 mm deviation, 10x /axis, 1 octave/min
  • 9-150 Hz, 9.8 m/s², 10x /axis, 1 octave/min

Devices with hard disk: Wall mounting

• Requirements according to: IEC 61131-2
• Tested according to: IEC 60068-2-6, Test Fc
• 10 ... 58 Hz, 0.0375 mm deviation, 10x /axis, 1 octave/min
• 58 ... 200 Hz, 4.9 m/s², 10x /axis, 1 octave/min

Shock loading during operation

Devices without hard disk:

• Requirements according to: IEC 61131-2
• Tested according to: IEC 60068-2-27, Test Ea
• Module/rack: 150 m/s², power-up, 11 ms shock duration

Devices with hard disk: Wall mounting

• Requirements according to: IEC 61131-2
• Tested according to: IEC 60068-2-27, Test Ea
• Devices with drive: 50 m/s², power-up, 30 ms shock duration

Electromagnetic compatibility (EMC)

• Emitted interference

EN 55022 Class B

• Interference immunity, burst

EN 61000-6-2 or IEC 61131-2:

• 2 kV ? Tested acc. to IEC 61000-4-4
• 1 kV symmetrical / 2 kV asymmetrical ? Tested acc. to IEC 61000-4-5

• Interference immunity, surge

1 kV to IEC 61000-4-5; symmetrical

2 kV to IEC 61000-4-5; asymmetrical

• ESD interference immunity

According to NAMUR Recommendation NE 21 and EN 61000-6-2:

• 6 kV contact discharge ? Tested acc. to IEC 61000-4-2
• 8 kV air discharge ? Tested acc. to IEC 61000-4-2

• Immunity to high radio frequency interference

According to EN 61000-6-2 or IEC 61131-2:

• Interference immunity 80 ... 1000 MHz: 10 V/m with 80% AM (1 kHz); tested acc. to IEC 61000-4-3;
• 1.4 GHz ... 2 Hz: 10 V/m with 50% pulse modulation; tested according to IEC 61000-4-3

• Immunity to high-frequency current feed

Acc. to NAMUR Recommendation NE 21 and EN 61000-6-2 or IEC 61131-2:

• 10 kHz ... 80 MHz: 10 V with 80% AM (1 kHz) tested acc. to IEC 61000-4-6

• Immunity to magnetic fields

Acc. to NAMUR Recommendation NE 21 and EN 61000-6-2 or IEC 61131-2:

50/60 Hz; 100 A/m rms value - tested acc. to IEC 61000-4-8

Ambient temperature during operation

• 0 ... 55 ?C with flash drive/SSD (horizontal; preferred mounting position; with derating)
• 0 ... 50 ?C with flash drive/SSD (horizontal; preferred mounting position; maximum configuration)
• 0 ... 50 ?C with flash drive/SSD (vertical)
• 5 ... 40 ?C with hard disk (horizontal and vertical)

Moist heat

• With CompactFlash card/SSD: 95 %
• With hard drive 80%

System-tested SIMATIC Industrial Software

WinAC RTX (F), WinCC flexible, WinCC (SCADA as of V7.0), WinCC RT Advanced and Professional

Approvals

UL508, UL60950, cULus

Marine approval

Only for configurations with CompactFlash or SSD memory

• GL - Germanische Lloyd
• BV ? Bureau Veritas
• LR - Lloyds Register of Shipping
• ABS - American Bureau of Shipping
• DNV - Det Norske Veritas
• NKK - Nippon Kaiji Kyokai

Safety regulations

• IEC 61131-2
• IEC 61010-1
• EN 60950-1

CE mark

• EC Directive 89/336/EEC (EMC Directive)
• Use in industry:
  
  • Emitted interference: EN 61000-6-4
  • Noise immunity: EN 61000-6-2
• Applications in residential areas, business and trade environments as well as in workshops:
  
  • Emitted interference: EN 61000-6-3
  • Noise immunity: EN 61000-6-1

Dimensions and weights

Equipment dimensions (in mm)

• Width x height: 262 x 134
• Depth of basic unit: 47
• Depth of basic unit above rail: 50
• Additional depth per expansion (1-3): 17 each

Weight, approx.

2 kg