SIMARIS project ist ein Softwaretool zur schnellen Ermittlung des erforderlichen Raumbedarfs und des Budgets elektrischer Energieverteilungen fur Zweck- und Industriebauten sowie zur automatischen Generierung von Leistungsverzeichnissen.

The following is determined in SIMARIS project based on the pre-defined project structure and the basic technical specifications selected:

• For medium-voltage switchboards: selection of the required system and the required fields, then presentation of a front view with dimensions.
• Following selection of the system for transformers, the required quantity must be selected. Selected transformers are presented as a parts list.
• For low-voltage switchboards and distribution boards: selection of the required protection devices and switching devices per system. The most suitable distribution system is determined automatically based on the list of distribution devices thus created. It is then equipped with the devices and presented graphically in an automatically generated front view that includes dimensions.
• Following selection of the system for busbar trunking systems the length is specified and the additionally required components are selected, e.g. infeeds, junction units and tap-off units. All the resulting components are listed in a parts list.

Detailed information about Siemens devices or their article numbers is not needed because SIMARIS project makes the selection automatically on the basis of the parameters entered. For each item of switchboard or each distribution board, SIMARIS project takes the wiring, control and measurement etc. into account.

A system plan drawn up in SIMARIS design can also be imported into SIMARIS project, which means that selecting devices becomes redundant. SIMARIS project baut die Projektstruktur in diesem Falle automatisch auf.

Convenient output versions are available to document the results, including the automatic generation of specifications for the planned systems.

Typical versions of a system planned in SIMARIS project can be saved and repeatedly integrated in new projects from the Favorites library. Automatically created systems can also be subsequently optimized or changed. This is particularly relevant if planning becomes more detailed and the budget needs to be reinforced as a result.

For detailed calculation of costs - on an up-to-date and regional basis - and for more project support, please contact your Siemens representative.