Siemens
ÑÐÅÄÑÒÂÀ ÏÐÎÌÛØËÅÍÍÎÉ ÀÂÒÎÌÀÒÈÇÀÖÈÈ
îôèöèàëüíûé ïàðòíåð Ñèìåíñ
Êàòàëîã ÑÀ01 2017
àðõèâíûé
(4872) 700-366
skenergo@mail.ru

Supplementary system components
Intelligent Operator Panel IOP Handheld

IOP Handheld for mobile use

The IOP Handheld is a very user-friendly and powerful operator panel for commissioning and diagnostics as well as local operator control and monitoring of SINAMICS G110D, SINAMICS G120D and SINAMICS G110M distributed inverters.

The IOP supports both entry-level personnel and drive experts. Thanks to the large plain text display, the menu-based operation and the application wizards, it is easy to commission standard drives. A drive can be essentially commissioned without having to use a printed parameter list - as the parameters are displayed in plain text, and are provided explanatory help texts and the parameter filtering function.

Application wizards interactively guide you when commissioning important applications such as conveyor technology, pumps, fans and compressors.

There is a basic commissioning wizard for general commissioning.

The drives are easily controlled manually using directly assigned buttons and the navigation wheel. The IOP Handheld has a dedicated switchover button to switch over from automatic to manual mode.

The inverter can be diagnosed in a user-friendly fashion using the plain text display of faults and alarms. Help texts can be obtained by pressing the INFO button.

Up to two process values can be graphically visualized and up to four process values can be numerically visualized on the status screen/display.

Process values can also be displayed in technological units.

The IOP Handheld supports standard commissioning of identical drives. For this purpose, a parameter list can be copied from an inverter into the IOP Handheld and downloaded into other drive units of the same type as required.

The IOP supports the following languages 1): German, English, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian, Czech, Polish, Turkish, Finnish.

In addition to the IOP, the IOP Handheld includes a housing with the rechargeable batteries, charging unit and RS232 connecting cable. The charging unit is supplied with connector adapters for Europe, the US and UK. When the batteries are fully charged, the operating time is up to 8 hours.

To connect the IOP Handheld to SINAMICS G110D, SINAMICS G120D or SINAMICS G110M, the RS232 connecting cable with optical interface is required in addition.

Updating the IOP Handheld

The IOP Handheld can be updated and expanded using the integrated USB interface.

Data to support future drive systems can be transferred from the PC to the IOP Handheld via drag & drop. Further, the USB interface allows user languages and wizards that will become available in the future to be subsequently downloaded and the firmware to be updated for the IOP Handheld 1).

The IOP is supplied with power via the USB interface during an update.

1) Further information is available at
http://support.automation.siemens.com/WW/view/en/67273266

Selection and ordering data

Description

Article No.

IOP handheld unit

For use with SINAMICS G120, SINAMICS G120C, SINAMICS G120P, SINAMICS G110D, SINAMICS G120D, SINAMICS G110M and SINAMICS S110

Included in the scope of delivery:

  • Intelligent Operator Panel IOP
  • Handheld housing
  • Rechargeable batteries (4 ? AA)
  • Charging unit (international)
  • RS232 connecting cable (3 m/9.84 ft long, for use with SINAMICS G120, SINAMICS G120C, SINAMICS G120P and SINAMICS S110)
  • USB cable (1 m/3.28 ft long)

6SL3255-0AA00-4HA0

RS232 connecting cable

With optical interface to connect the SINAMICS G110D, SINAMICS G120D or SINAMICS G110M inverters to the IOP Handheld (2.5 m/8.20 ft long)

3RK1922-2BP00



Manual local control with keyswitch

Example: SINAMICS G110D and manual local control with integrated keyswitch

The manual local control is a simple method to locally control and commission the SINAMICS G110D distributed inverter.

To switch over from the automatic to the manual mode or to switch off the inverter, there is a keyswitch from which the key can be withdrawn in each of the three operating modes (Auto/Off/Local).

  • The inverter is controlled via the PLC in "Auto" mode
  • In the "Off" state, the device is shut down (however, the line supply voltage is still connected)
  • The drive is locally and directly controlled in the "Local" setting. The device is simply controlled using directly assigned buttons. The following functions can be selected:
    • Switching over between continuous operation/jog mode
    • On/Counter-clockwise
    • On/Clockwise
    • Deactivate Quick Stop

The manual local control is mounted on the inverter instead of the standard blanking cover. This means that it can be retrofitted at a later date.

Selection and ordering data

Description

Article No.

Manual local control with keyswitch

6SL3555-0PL00-2AA0



Memory card

SINAMICS memory card (SD card)

The parameter settings for an inverter can be stored on the SINAMICS SD memory card. When service is required, e.g. after the inverter has been replaced and the data have been downloaded from the memory card the drive system is immediately ready for use again. The card holder is not included in the scope of supply of the inverter and must be separately ordered.

Selection and ordering data

Description

Article No.

SINAMICS memory card (SD card)

6SL3054-4AG00-2AA0



Card holder for memory card

Use of the SINAMICS SD memory card requires a card holder. This can be subsequently inserted under the blanking cover or under the optional manual local control on the inverter - where it can also remain. In addition, a Secure Digital card (SD) of up to max. 1 GB can also be used.

SINAMICS G110D with integrated card holder (in the open state)

Selection and ordering data

Description

Article No.

Card holder

For memory card

6SL3555-0PM00-0AA0



RS232 interface cable for communication with a PC

For controlling and commissioning an inverter directly from a PC via a point-to-point connection if the appropriate software (STARTER commissioning tool 1), V4.1.3 and higher) has been installed.

Selection and ordering data

Description

Article No.

RS232 interface cable

For communication with a PC

3RK1922-2BP00



USB interface cable for communication with a PC

For controlling and commissioning an inverter directly from a PC via a point-to-point connection if the appropriate software (STARTER commissioning tool 1), V4.1.3 and higher) has been installed.

Selection and ordering data

Description

Article No.

USB interface cable

For communication with a PC (2.5 m/8.20 ft long)

6SL3555-0PA00-2AA0



Adapter for mounting SINAMICS G110D instead of SIRIUS M200D motor starter

For adaptation, there are connection boards that allow SINAMICS G110D to be mounted onto existing connection holes of the SIRIUS M200D motor starter (provided there is sufficient space). This means that a system can be adapted to future changes in requirements.

Selection and ordering data

Description

Article No.

Adapter

For mounting SINAMICS G110D instead of SIRIUS M200D motor starter

6SL3263-1GA20-0GA0



STARTER commissioning tool

The STARTER commissioning tool (STARTER V4.1.3 and higher) supports the commissioning and maintenance of SINAMICS G110D inverters. The operator guidance combined with comprehensive, user-friendly functions for the relevant drive solution allow you to commission the device quickly and easily.

Selection and ordering data

Description

Article No.

STARTER commissioning tool 1)

On DVD-ROM

6SL3072-0AA00-0AG0



1) The STARTER commissioning tool is also available on the internet at http://support.automation.siemens.com/WW/view/en/10804985/133100

 

An overview of all available accessories (e.g. connectors and cables) can be found under the following link:
http://www.siemens.com/distributeddrives-supplementaryproducts

Connector kit for braking resistor

A connector kit is available for connecting other braking resistors to SINAMICS G110D.

Selection and ordering data

Description

Article No.

Connector kit

For braking resistor

6SL3563-4RA00-0GA0



UL connector kit

A special UL connector kit is required for using SINAMICS G110D in UL-compatible applications. This comprises all parts that are needed to connect power and the motor (contacts, contact housing, metal connector housing and a cable of about 7 m (23 ft) in length).

Selection and ordering data

Description

Article No.

UL connector kit

For power and motor

6SL3563-4UA00-0GA0



Protection bar

Protection bars are available for the various frame sizes for protecting the connectors from shearing off in response to mechanical forces. These are mounted above and to the side of the SINAMICS G110D and protect the connectors and the keyswitch of the optional manual local control.

Selection and ordering data

Description

Article No.

Protection bar

 

  • For frame sizes FSA and FSB

6SL3263-1HA20-0GA0

  • For frame size FSC

6SL3263-1HC20-0GA0



Connecting cable and socket for AS-Interface

Selection and ordering data

Description

Article No.

AS-Interface M12 branch

To connect the AS-Interface and the VAux cable to an M12 socket, UL
Length:

 

  • 1 m (3.28 ft)

3RK1901-1NR21

  • 2 m (6.56 ft)

3RK1901-1NR22

M12 socket

For screw mounting, 4-pole screw-type connection max. 0.75 mm2, A-coded, max. 4 A, UL

 

  • Angled

3RK1902-4CA00-4AA0



Connecting cables and connectors for digital inputs

Selection and ordering data

Description

Article No.

M12 plug-in cable

With PUR sheath, to connect digital sensors and actuators, pre-assembled at one end, angled, plug connector, 5-pole, 5 ? 0.34 mm2, UL
Length:

 

  • 1.5 m (4.92 ft)

3RK1902-4HB15-5AA0

  • 5 m (16.41 ft)

3RK1902-4HB50-5AA0

  • 10 m (32.81 ft)

3RK1902-4HC01-5AA0

M12 connector

For screw mounting, 5-pole screw-type connection max. 0.75 mm2, A-coded, max. 4 A, UL, plug connector

 

  • Straight

3RK1902-4BA00-5AA0

  • Angled

3RK1902-4DA00-5AA0



Connecting cables pre-assembled at one end and connector sets to connect to the line supply

Selection and ordering data

Description

Article No.

Connecting cable pre-assembled at one end

Power supply cable, open at one end, for HAN Q4/2, angled, 4 ? 4 mm2

 

  • 1.5 m (4.92 ft) long

3RK1911-0DB13

  • 5 m (16.41 ft) long

3RK1911-0DB33

Connector set for the power supply

HAN Q4/2

 

  • 2.5 mm2

3RK1911-2BE50

  • 4 mm2

3RK1911-2BE10

  • 6 mm2

3RK1911-2BE30



Motor cables pre-assembled at one end and connector sets to connect the inverter to the motor

Selection and ordering data

Motor cables pre-assembled at one end

For motors with brake and temperature sensor
with HAN Q8 connector, shielded

Article No.

(HTG: supplied by Harting)
(ZKT: supplied by KnorrTec)

Cross-section

4 ? 1.5 mm2
2 ? (2 ? 0.75 mm2)

4 ? 2.5 mm2
2 ? (2 ? 0.75 mm2)

4 ? 4 mm2
2 ? 1 mm2 + 2 ? 1.5 mm2

  • 1.5 m (4.92 ft) long

HTG: 61 88 201 0288

HTG: 61 88 201 0291

HTG: 61 88 201 0303

 

ZKT: 70020501000150

ZKT: 70009601000150

ZKT: 70017001000150

  • 3 m (9.84 ft) long

HTG: 61 88 201 0289

HTG: 61 88 201 0292

HTG: 61 88 201 0304

 

ZKT: 70020501000300

ZKT: 70009601000300

ZKT: 70017001000300

  • 5 m (16.41 ft) long

HTG: 61 88 201 0290

HTG: 61 88 201 0293

HTG: 61 88 201 0305

 

ZKT: 70020501000500

ZKT: 70009601000500

ZKT: 70017001000500

  • 10 m (32.81 ft) long

HTG: 61 88 201 0299

HTG: 61 88 201 0301

HTG: 61 88 201 0306

 

ZKT: 70020501001000

ZKT: 70009601001000

ZKT: 70017001001000

Connector set for motor cable

HAN Q8, shielded

 

 

HTG: 61 83 401 0131

HTG: 61 83 401 0132

HTG: 61 83 401 0133

 

ZKT: 10032001

ZKT: 10032011

ZKT: 10032021



Power bus distribution 400 V in IP65 degree of protection

Selection and ordering data

Description

Ordering (see Solution Partner)

Power T clamp connector for 2.5 ... 6 mm2

With attached 7-pole connector, female contact insert, grommet housing, UL

Seals for various cable cross-sections must be ordered separately

Ordered from and supplied by Harting

T clamp connector

Completely pre-assembled

Ordered from and supplied by KnorrTec

T distributor box, IDC connection power cable

Pre-assembled, UL, uncut power cable, 2.5 ... 6 mm2

Push-in connection: 1.5 ... 6 mm2

Seals for various cable cross-sections must be ordered separately

Ordered from and supplied by Weidmuller

Y distributor

For direct connection of 400 V supply line, HAN Q4/2, conductor cross-section 1.5 ... 4 mm2

Ordered from and supplied by Harting



















skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Àðìàòóðà DENDOR

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Äàò÷èêè è èçìåðèòåëè

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ðåãóëÿòîðû è ðåãèñòðàòîðû

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ïíåâìàòè÷åñêîå îáîðóäîâàíèå

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Êðàíû è Êëàïàíû

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Èçìåðèòåëüíûå ïðèáîðû

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ñèñòåìû áåñïðîâîäíîãî óïðàâëåíèÿ «óìíûé äîì»

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Áåñêîíòàêòíûå âûêëþ÷àòåëè Êîíå÷íûå âûêëþ÷àòåëè Îïòè÷åñêèå äàò÷èêè Ýíêîäåðû

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Óñòàíîâêà óìÿã÷åíèÿ

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30


Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Óñòàíîâêà îáåçæåëåçèâàíèÿ

  © ÎÎÎ "ÑÊ ÝÍÅÐÃÎ" 2007-2022
  (4872) 700-366  skenergo@mail.ru
ßíäåêñ.Ìåòðèêà