Converter cabinet units . Опции. Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на Converter cabinet units

| | | | | | | |

Converter cabinet units

When ordering a converter with options, add the suffix "-Z" to the article number and then the order code(s) for the desired option(s).

Example:
6SL3710-7LE32-1AA3-Z
M07+D60+...

See also ordering examples.

Available options	Order code
Input side
Use in the first environment according to EN 618003, Category C2 (TN-TT line supplies with grounded neutral point)	L00
Infeed module one level lower	L04
Surge suppression	L21
Main switch incl. fuses or circuit breakers	L26
Line filter monitoring	L40
EMC shielding busbar (cable connection from below) ¹⁾	M70
Output side
dv/dt filter plus Voltage Peak Limiter	L07
Motor reactor	L08
dv/dt filter plus Voltage Peak Limiter	L10
Sine-wave filter (only for the voltage range 380 to 480 V, up to 200 kW)	L15
EMC shielding busbar (cable connection from below) ¹⁾	M70
Motor protection and safety functions
EMERGENCY OFF pushbutton installed in the cabinet door	L45
EMERGENCY OFF category 0, 230 V AC or 24 V DC	L57
EMERGENCY STOP category 1, 230 V AC	L59
EMERGENCY STOP category 1, 24 V DC	L60
Thermistor motor protection (alarm)	L83
Thermistor motor protection (trip)	L84
Pt100 evaluation unit	L86
Insulation monitoring	L87
Additional touch protection	M60
Degree of protection increase
Degree of protection IP21	M21
Degree of protection IP23	M23
Degree of protection IP43	M43
Degree of protection IP54	M54
Mechanical options
Base 100 mm high, RAL 7022	M06
Cable-marshaling compartment 200 mm high, RAL 7035	M07
Line connection from above	M13
Motor connection from above	M78
Crane transport assembly (top-mounted)	M90
Safety Integrated
Safety license for 1 axis	K01
Second SMC30 Sensor Module Cabinet-Mounted	K52
Terminal module for controlling the Safe Torque Off and Safe Stop 1 safety functions	K82
TM54F Terminal Module	K87
Safe Brake Adapter SBA, 230 V AC	K88
Other options
CBC10 Communication Board	G20
CBE20 Communication Board	G33
TM150 temperature sensor evaluation unit	G51
TM31 Terminal Module	G60
Additional TM31 Terminal Module	G61
TB30 Terminal Board	G62
SMC10 Sensor Module Cabinet-Mounted	K46
SMC20 Sensor Module Cabinet-Mounted	K48
SMC30 Sensor Module Cabinet-Mounted	K50
VSM10 Voltage Sensing Module	K51
CU320?2 PN Control Unit	K95
Connection for external auxiliary equipment	L19
Cabinet lighting with service socket	L50
Cabinet anti-condensation heating	L55
25/125 kW braking unit for line voltages of 380 … 480 V (110 … 132 kW) and 660 … 690 V (75 … 132 kW)	L61
50/250 kW braking unit for line voltages of 380 … 480 V (160 … 800 kW) and 660 … 690 V (160 … 1200 kW)	L62
25/125 kW braking unit for line voltages of 500 … 600 V (110 … 132 kW)	L64
50/250 kW braking unit for line voltages of 500 … 600 V (160 … 1200 kW)	L65
Marking of all control cable wire ends	M91
Special cabinet paint finish ²⁾	Y09
One-line label for system identification, 40 ? 80 mm	Y31
Two-line label for system identification, 40 ? 180 mm	Y32
Four-line label for system identification, 40 ? 180 mm	Y33
Documentation (standard: English/German)
Documentation, production flowchart: one issue	B43
Documentation, production flowchart: updated every two weeks	B44
Documentation, production flowchart: updated every month	B45
Documentation in German	D00
Customer documentation (circuit diagram, terminal diagram, layout diagram) in DXF format	D02
Customer documentation as hard copy	D04
Preliminary version of customer documentation	D14
Documentation in Russian	D56
Documentation in English / French	D58
Documentation in English / Spanish	D60
Documentation in Italian	D72
Documentation in English	D76
Documentation in French	D77
Documentation in Spanish	D78
Documentation in English / Italian	D80
Documentation in Chinese	D84
Documentation in English / Chinese	D91
Documentation in English / Portuguese (Brazil)	D93
Documentation in English / Russian	D94
Rating plate data (standard: English/German)
Rating plate data in English/French	T58
Rating plate data in English/Spanish	T60
Rating plate data in English/Italian	T80
Rating plate data in English/Portuguese (Brazil)	T83
Rating plate data in English/Russian	T85
Rating plate data in English/Chinese	T91
Options specific to the chemical industry
NAMUR terminal block	B00
Protective separation for 24 V supply (PELV)	B02
Outlet for external auxiliary equipment (uncontrolled)	B03
Options specific to the shipbuilding industry
Marine version	M66
Individual certificate from Germanische Lloyd (GL)	E11
Individual certificate from Lloyds Register (LR)	E21
Individual certificate from Bureau Veritas (BV)	E31
Individual certificate from Det Norske Veritas (DNV)	E51
Individual certificate from American Bureau of Shipping (ABS)	E61
Individual certificate from Chinese Certification Society (CCS)	E71
Converter acceptance in presence of customer
Visual acceptance	F03
Function test without motor	F71
Function test with test bay motor under no-load conditions	F75
Insulation test	F77
Customer-specific acceptance inspections (on request)	F97
Converter acceptance without the customer present
Function test without motor	F72
Function test with test bay motor under no-load conditions	F74
Insulation test	F76

¹⁾ This option is listed for the input- and output-side options, but is only required once.

²⁾ The order code Y.. requires data in plain text.

Option selection matrix

Certain options can mutually exclude one another
(options that are not involved, are also not shown).

?	Possible combination
–	Combination not possible

Electrical options

	L07	L08	L10	L15	L57	L59	L60	L61/L64	L62/L65	L87	K82	M78
L07		–	–	–	?	?	?	?	?	?	?	–
L08	–		–	–	?	?	?	?	?	?	?	–
L10	–	–		–	?	?	?	?	?	?	?	–
L15	–	–	–		?	?	?	?	?	?	?	–
L57	?	?	?	?		–	–	?	?	?	?	?
L59	?	?	?	?	–		–	?	?	?	?	?
L60	?	?	?	?	–	–		?	?	?	?	?
L61/L64	?	?	?	?	?	?	?		–	?	?	?
L62/L65	?	?	?	?	?	?	?	–		?	?	?
L87	?	?	?	?	?	?	?	?	?		– ¹⁾	?
K82	?	?	?	?	?	?	?	?	?	– ¹⁾		?
M78	–	–	–	–	?	?	?	?	?	?	?

¹⁾ A combination of L87 and K82 is available on request.

Mechanical/electrical options

	M06	M07	M13	M21	M23	M43	M54	M60	M66	M70	M78
M06		–	?	?	?	?	?	?	?	?	?
M07	–		?	?	?	?	?	?	?	?	?
M13	?	?		–	?	?	?	?	?	– ²⁾	?
M21	?	?	–		–	–	–	– ³⁾	–	?	–
M23	?	?	?	–		–	–	–	–	?	?
M43	?	?	?	–	–		–	–	–	?	?
M54	?	?	?	–	–	–		–	?	?	?
M60	?	?	–	– ³⁾	–	–	–		?	?	–
M66	?	?	?	–	–	–	?	?		?	–
M70	?	?	– ²⁾	?	?	?	?	?	?		– ²⁾
M78	?	?	?	–	?	?	?	–	–	– ²⁾

²⁾ If the line connection (option M13) and the motor connection (option M78) are from above, the EMC shield bus is not required in the lower cabinet area.

³⁾ Can only be selected for converters in the voltage range 400 V to 250 kW and 690 V to 315 kW. The M60 option is fitted as standard for higher outputs.

Other options

	G20	G33	G62	K46	K48	K50	K51	K52
G20		–	–	?	?	?	?	?
G33	–		–	?	?	?	?	?
G62	–	–		?	?	?	?	?
K46	?	?	?		–	–	–	–
K48	?	?	?	–		–	–	–
K50	?	?	?	–	–		–	?
K51	?	?	?	–	–	–		–
K52	?	?	?	–	–	?	–

Documentation

	D00	D02	D14	D56	D58	D60	D72	D76	D77	D78	D80	D84	D91	D93	D94	D99
D00		?	?	?	?	?	?	?	?	?	?	?	?	?	?	–
D02	?		?	?	?	?	?	?	?	?	?	?	?	?	?	–
D14	?	?		?	?	?	?	?	?	?	?	?	?	?	?	–
D56	?	?	?		?	?	?	?	?	?	?	?	?	?	–	–
D58	?	?	?	?		–	?	–	–	?	–	?	–	–	–	–
D60	?	?	?	?	–		?	–	?	–	–	?	–	–	–	–
D72	?	?	?	?	?	?		?	?	?	–	?	?	?	?	–
D76	?	?	?	?	–	–	?		?	?	–	?	–	–	–	–
D77	?	?	?	?	–	?	?	?		?	?	?	?	?	?	–
D78	?	?	?	?	?	–	?	?	?		?	?	?	?	?	–
D80	?	?	?	?	–	–	–	–	?	?		?	–	–	–	–
D84	?	?	?	?	?	?	?	?	?	?	?		–	?	?	–
D91	?	?	?	?	–	–	?	–	?	?	–	–		–	–	–
D93	?	?	?	?	–	–	?	–	?	?	–	?	–		–	–
D94	?	?	?	–	–	–	?	–	?	?	–	?	–	–		–
D99	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–

Rating plate data

	T58	T60	T80	T83	T85	T91
T58		–	–	–	–	–
T60	–		–	–	–	–
T80	–	–		–	–	–
T83	–	–	–		–	–
T85	–	–	–	–		–
T91	–	–	–	–	–

Ordering examples

Example 1

Task:
A drive system is required for a vehicle test stand to perform exhaust gas analysis which can simulate driving profiles and cycles as encountered in everyday traffic situations. This means for the drive system that the dynamometer must be operated both in the motoring as well as regenerating modes.

A drive with regenerative feedback into the line supply is required as regenerative operation is the predominant operating mode and dynamic switching operations are required.

The max. regenerative power is 200 kW. The drive converter must have degree of protection IP54 as a result of the environmental conditions. An installation altitude of < 1000 m and 45 °C as the maximum ambient temperature can be assumed. The windings must be equipped with Pt100 resistance thermometers and monitored by the drive converter for alarm and trip. A switch disconnector must be provided to disconnect the converter from the 400 V power supply. In addition, the cabinet is to have a special paint finish in RAL 3002.

Solution:
Taking into account the derating factors for degree of protection IP54 and the increased ambient temperature of 45 °C, a converter with a minimum power rating of 223 kW should be configured.
A converter with a power rating of at least 250 kW and options M54 (degree of protection IP54), L26 (main switch including fuses), L86 (Pt100 evaluation unit) and Y09 (special paint finish) is selected.

The ordering data are as follows:
6SL3710-7LE35-0AA3-Z
M54+L26+L86+Y09
Cabinet color RAL 3002

Example 2

Task:
A drive system is required for a conveyor belt in a brown-coal open-cast mine that is capable of both motor and generator operation. Since the conveyor belt must be capable of starting after a fault when loaded with bulk material, and it is possible for peak loads to occur where 1.5 times the power is required for up to 60 s, the drive system must be designed according to the overload requirements of such a case. The drive converter is installed in a climate-controlled container as a result of the environmental conditions typical of an open-cast mine. The installation altitude is 320 m above sea level and the maximum ambient temperature in the container is 35 °C. The drive is powered through a converter transformer from the medium-voltage system. The drive is connected to an isolated-neutral system and must have insulation monitoring. A motor with separately-driven fan is selected here as the motor is subject to a high load torque when starting and in the lower range. The fan supply voltage is 690 V and must be drawn from the drive converter.
The required motor power is 420 kW.

Solution:
Since the converter is installed in an air-conditioned container, it can be designed with degree of protection IP20. The ambient temperature of 35 °C does not necessitate any additional derating. However, due to the specified overload conditions, the base load current I_H (for high overload) must be applied. This results in a power of approx. 520 kW for the drive converter. The converter with article no. 6SL3710-7LG35-8AA3 must be selected.

Option L87 (insulation monitoring) must be selected for insulation monitoring.

Option L19 (connection for external auxiliaries) must be selected for the controlled outgoing feeder to power the separately driven fan.

The ordering data are as follows:
6SL3710-7LG35-8AA3-Z
L19+L87

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания