• 2 x 2 cores for 10/100 Mbit/s transmission rate;
  4 x 2 cores for 10/100/1000 Mbit/s transmission rate
• Two cores with two dummy elements twisted into a pair.
• Each pair is encased in plastic film and shielded with a plastic-clad aluminum foil
• Outer woven shield around all pairs comprising tinned copper wires
• Plastic sheath (PVC)

IE TP Cord is available as TP Cord 4 x 2, pre-assembled cables in the following versions:

• IE TP Cord RJ45/RJ45
  with 2 x RJ45 plugs
• IE TP XP Cord RJ45/RJ45
  with 2 x RJ45 plugs, send and receive cables are twisted.

IE TP Cord is available as TP Cord 2 x 2, pre-assembled cables in the following versions:

• IE TP Cord 9/RJ45
  with one 9-pole Sub-D connector and one RJ45 connector
• IE TP XP Cord 9/RJ45
  with one RJ45 connector and one 9-pole Sub-D connector, send and receive cable are twisted
• IE TP Cord 9-45/RJ45
  with one RJ45 connector and one 9-pole Sub-D connector, 45° cable outlet
• IE TP XP Cord 9-45/RJ45
  with one RJ45 connector and one 9-pole Sub-D connector, 45° cable outlet; send and receive cable are twisted
• IE TP XP Cord 9/9
  with two 9-pole Sub-D connectors, send and receive cable are twisted.
• IE TP Cord RJ45/15
  with one RJ45 connector and one 15-pole Sub-D connector; this is used to directly connect data terminals with ITP interfaces to network components with an RJ45 interface.
• IE TP XP Cord RJ45/15
  with one RJ45 connector and one 15-pole Sub-D connector, twisted send and receive cable; used for direct connection of a data terminal with 15-pole Sub-D connector to a data terminal with RJ45 plug.
• IE TP Converter Cord 15/RJ45
  with a 15-pole Sub-D socket with slide locking and an RJ45 plug. A retaining clip clamps it in place. IE TP Converter Cord 15/RJ45 2 x 2 is used to connect data terminals with an RJ45 interface to the ITP cabling system, e.g. over the ITP Standard 9/15 cable.