SITRANS TS temperature sensors . Дизайн. Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SITRANS TS temperature sensors

| | | | | | |

Assets

SITRANS TS temperature sensors

SITRANS TS100 7MC71xx

The following figure shows the available versions of SITRANS TS100 temperature sensors.

SITRANS TS100

The following types of process connections can be implemented:

Compression fitting
Spring-loaded compression fitting
Soldering nipple
Direct soldering/welding in

SITRANS TS200 7MC72xx

The following figure shows the available versions of SITRANS TS200 temperature sensors.

SITRANS TS200, dimensions in mm (inch)

The following types of process connections can be implemented:

Compression fitting
Spring-loaded compression fitting
Soldering nipple
Direct soldering/welding in

SITRANS TS300

SITRANS TS300 modular design

The following figure shows the available versions and components of SITRANS TS300 temperature sensors in modular design.

SITRANS TS, temperature sensors, TS300 modular design, dimensions in mm (inch)

SITRANS TS300 Clamp-on

The temperature is recorded via a modified, quick-response Pt100 measuring element that is positioned and insulated by a tube collar made of temperature-resistant plastic.

The measuring insert contains a special temperature sensor made of silver that is constantly pressed onto the pipeline by a spring.

A positively driven operation of the replaceable measuring insert ensures a constant fit on the pipeline and thus provides for a reproducible measuring result.

Design
Measuring insert	Special measuring insert made of stainless steel; hygienic design Measuring element made of silver, thermal decoupling through plastic insert Measuring insert screwed into collar with spring tension. Use thermal paste prior to installation of device (see Accessories).
Tube collar
Material	Temperature-resistant, high-performance plastic with integrated insulation system in hygienic design
Ambient temperature influence	Approx. 0.2 %/10 K

The diameter of the measuring tube is required for correct device selection. For special sizes, you start by selecting the appropriate collar size and entering the desired size in plain text. Space-saving designs (clamping bracket version) are available optionally for installation in restricted spaces (e.g., tube bundles).
For correct assignment after recalibration, the collar as well as the measuring insert are marked with the serial number and tube diameter. This information can also be engraved.

The following figure illustrates the available designs and components of the SITRANS TS300 temperature sensors in clamp-on design:

SITRANS TS300 Clamp-on design, round connector, field enclosure, cable gland, versions, dimensions in mm (inch)

SITRANS TS500 7MC75xx

The following figure illustrates the available designs and components for SITRANS TS500 temperature sensors:

SITRANS TS500 temperature sensors; the IP degree of protection depends on the connection head

The temperature sensors of the SITRANS TS500 series are available in three different versions:

Version	Description	Application	Process connection
1	Protective sleeve made of tube material Protective sleeve and extension made from a tube; closed at tip with welded-in base plug	Minimal to medium process requirements	Connection with thread or flange Thread is welded on, or compression fitting
2	Protective sleeve made from barstock Protective sleeve made from barstock, extension made of tube material; extension screwed into protective sleeve	Medium to extreme process requirements	Directly welded into pipeline With welded-on flange With male thread
3	For installation in existing protective sleeves Extension made of tube material	Process requirements dependent on protective sleeve design	Screwed into existing protective sleeve