SINAMICS G150 Drive converter cabinet units . Технические данные. Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SINAMICS G150 Drive converter cabinet units

| | | | | | | | | | |

SINAMICS G150 Drive converter cabinet units

The most important directives and standards are listed below. These are used as basis for the SINAMICS G150 converter cabinet units and they must be carefully observed to achieve an EMC-compliant configuration that is safe both functionally and in operation.

European directives
2006/95/EC	Low-voltage directive: Directive of the European Parliament and Council of December 12, 2006, on the approximation of the laws of the member states relating to electrical equipment designed for use within certain voltage limits
2006/42/EC	Machinery directive: Directive of the European Parliament and Council of May 17, 2006 on machinery and for changing Directive 95/16/EC (amendment)
2004/108/EC	EMC directive: Directive of the European Parliament and Council of December 15, 2004, which repeals directive 89/336/EEC, on the approximation of laws of the member states relating to electromagnetic compatibility
European standards
EN ISO 3744	Acoustics – Determination of the sound power level and sound energy level for noise sources that result from sound pressure measurements – envelope surface procedure of the accuracy class 2 for a largely free sound field over a reflecting plane
EN ISO 13849-1	Safety of machinery – Safety-related parts of control systems Part 1: General design principles (ISO 13849?1:2006) (replaced EN 954?1)
EN 60146-1-1	Semiconductor converters – General requirements and line-commutated converters Part 1?1: Specification of basic requirements
EN 60204-1	Electrical equipment of machines Part 1: General definitions
EN 60529	Degrees of protection provided by enclosures (IP code)
EN 61508-1	Functional safety of electrical/electronic/programmable electronic safety-related systems Part 1: General requirements
EN 61800-2	Adjustable speed electrical power drive systems Part 2: General requirements – Rating specifications for the measurement of low-voltage adjustable frequency AC power drive systems
EN 61800-3	Adjustable speed electrical power drive systems Part 3: EMC product standard including special test procedure
EN 61800-5-1	Adjustable speed electrical power drive systems Part 5: Safety requirements Main section 1: Electrical and thermal requirements
EN 61800-5-2	Adjustable speed electrical power drive systems Part 5-2: Safety requirements – Functional safety (IEC 61800?5?2:2007)

General technical specifications

Electrical specifications		Single connection	Parallel connection
Line voltages and power ranges	380 ... 480 V 3 AC ±10% (?15% < 1 min)	110 ... 560 kW	630 ... 900 kW
	500 ... 600 V 3 AC ±10% (?15% < 1 min)	110 ... 560 kW	630 ... 1000 kW
	660 ... 690 V 3 AC ±10% (?15% < 1 min)	75 ... 800 kW	1000 ... 2700 kW
Line system configurations	Grounded TN/TT systems or ungrounded IT systems (a grounded line conductor is not permissible in 690 V line supplies)
Line frequency	47 ... 63 Hz
Output frequency	0 ... 550 Hz¹⁾
Line power factor
Fundamental	> 0.96
Total	0.75 ... 0.93
Efficiency	> 98%
Overvoltage category	III according to EN 61800-5-1
Control method	Vector control with and without encoder or V/f control
Fixed speeds	15 fixed speeds plus 1 minimum speed, parameterizable (in the default setting, 3 fixed setpoints plus 1 minimum speed are selectable using terminal block / PROFIBUS)
Speed ranges that can be skipped	4, parameterizable
Setpoint resolution	0.001 rpm digital 12-bit analog
Braking operation	Optional via braking unit
Mechanical specifications
Degree of protection	IP20 (higher degrees of protection up to IP54 optional)
Protection class	I according to EN 61800?5?1
Touch protection	EN 50274 / BGV A3 when used for the intended purpose
Cabinet system	Rittal TS8, doors with double-bit key, three-section base plates for cable entry
Paint finish	RAL 7035 (indoor requirements)
Cooling method	Forced air cooling AF according to EN 60146
Ambient conditions	Storage	Transport	Operation
Ambient temperature	-25 ... +55 °C	-25 ... +70 °C as of -40 °C for 24 hours	0 ... +40 °C to +50 °C see derating data
Relative humidity (condensation not permissible)	5 ... 95%	5 ... 95% at 40 °C	5 ... 95%
	Class 1K4 according to EN 60721?3?1	Class 2K3 according to EN 60721?3?2	Class 3K3 according to EN 60721?3?3
Environmental class / harmful chemical substances	Class 1C2 according to EN 60721?3?1	Class 2C2 according to EN 60721?3?2	Class 3C2 according to EN 60721?3?3
Organic/biological influences	Class 1B1 according to EN 60721?3?1	Class 2B1 according to EN 60721?3?2	Class 3B1 according to EN 60721?3?3
Degree of pollution	2 according to EN 61800?5?1
Installation altitude	Up to 2000 m above sea level without derating; > 2000 m see derating data
Mechanical stability	Storage	Transport	Operation
Vibratory load
Deflection	1.5 mm at 5 ... 9 Hz	3.1 mm at 5 ... 9 Hz	0.075 mm at 10 ... 58 Hz
Acceleration	5 m/s² at > 9 ... 200 Hz	10 m/s² at > 9 ... 200 Hz	10 m/s² at > 58 … 200 Hz
	Class 1M2 according to EN 60721?3?1	Class 2M2 according to EN 60721?3?2	–
Shock load
Acceleration	40 m/s² for 22 ms	100 m/s² for 11 ms	100 m/s² for 11 ms
	Class 1M2 according to EN 60721?3?1	Class 2M2 according to EN 60721?3?2	Class 3M4 according to EN 60721?3?3
Compliance with standards
CE marking	According to EMC Directive No. 2004/108/EC and Low Voltage Directive No. 2006/95/EC and Machinery Directive No. 2006/42/EC for functional safety
Radio interference suppression	The SINAMICS G150 converter systems are not designed for connection to the public power network ("first environment"). Radio interference suppression is compliant with the EMC product standard for variable-speed drives EN 61800?3, "Second environment" (industrial networks). EMC disturbances can occur when connected to the public power networks. However, if supplementary measures are taken (e.g. line filter, see option L00) operation in the "first environment" is possible. ²⁾

Deviations from the specified classes are underlined.

¹⁾ The output frequency is also affected by the selected control method and the pulse frequency. For further information, please refer to the SINAMICS Low Voltage Engineering Manual.

²⁾ Applies to motor cable lengths < 100 m.

Technical specifications for single connection

Line voltage 380 ... 480 V 3 AC		SINAMICS G150 converter cabinet units 6SL3710-1GE..-....
Single connection		32?1.A3	32?6.A3	33?1.A3	33?8.A3	35?0.A3	36?1.A3	37?5.A3	38?4.A3	41?0.A3
Type rating
For I_Lat 50 Hz 400 V ¹⁾	kW	110	132	160	200	250	315	400	450	560
For I_Hat 50 Hz 400 V ¹⁾	kW	90	110	132	160	200	250	315	400	450
For I_Lat 60 Hz 460 V ²⁾	hp	150	200	250	300	400	500	600	600	800
For I_Hat 60 Hz 460 V ²⁾	hp	125	150	200	250	350	350	450	500	700
Output current
Rated current I_n	A	210	260	310	380	490	605	745	840	985
Base-load current I_L³⁾	A	205	250	302	370	477	590	725	820	960
Base-load current I_H⁴⁾	A	178	233	277	340	438	460	570	700	860
Input current
Rated input current ⁵⁾	A	229	284	338	395	509	629	775	873	1024
Input current, max.	A	335	410	495	606	781	967	1188	1344	1573
Current requirement, 24 V DC auxiliary power supply ⁶⁾	A	1.1	1.1	1.35	1.35	1.35	1.4	1.4	1.4	1.5
Rated short-circuit current according to IEC ⁷⁾	kA	65	65	65	65	65	65	65	84	84
Minimum short-circuit current ⁸⁾	A	3000	3600	4400	4400	8000	10000	10500	16000/1800 ⁹⁾	18400/2000 ⁹⁾
Power loss, max. ¹⁰⁾
At 50 Hz 400 V	kW	2.9	3.8	4.4	5.3	6.4	8.2	9.6	10.1	14.4
At 60 Hz 460 V	kW	2.54	3.36	4.07	4.67	5.96	8.3	9.7	10.2	14.7
Cooling air requirement	m³/s	0.17	0.23	0.36	0.36	0.36	0.78	0.78	0.78	1.48
Sound pressure level L_pA (1 m) at 50/60 Hz	dB	67/68	69/73	69/73	69/73	69/73	70/73	70/73	70/73	72/75
Cable lengths between converter and motor ¹¹⁾
Shielded	m	300	300	300	300	300	300	300	300	300
Unshielded	m	450	450	450	450	450	450	450	450	450
Dimensions
Width for version A/C	mm	800/400	800/400	800/400	1000/400	1000/400	1200/600	1200/600	1200/600	1600/1000
Height ¹²⁾	mm	2000	2000	2000	2000	2000	2000	2000	2000	2000
Depth	mm	600	600	600	600	600	600	600	600	600
Weight, approx. (degree of protection IP20, without options) for version A/C	kg	460/225	460/225	670/300	670/300	670/300	750/670	750/670	780/670	1100/880

Note: The power data in hp units is based on the NEC/CEC standards for the North American market.

For information on the line connection, motor connection and cabinet grounding, see Section Configuration.

¹⁾ Rated output of a typical 6-pole standard induction motor based on I_L or I_H for 3 AC 50 Hz 400 V.

²⁾ Rated output of a typical 6-pole standard induction motor based on I_L or I_H for 3 AC 60 Hz 460 V.

³⁾ The base-load current I_L is based on a load cycle of 110% for 60 s or 150% for 10 s with a load cycle duration of 300 s. See Characteristic curves, Section Overload capability.

⁴⁾ The base-load current I_H is based on a duty cycle of 150% for 60 s or 160% for 10 s with a duty cycle duration of 300 s. See Characteristic curves, Section Overload capability.

⁵⁾ The currents listed here are based on the rated output current.

⁶⁾If the drive control is to remain active after a main infeed failure, the converter must be externally supplied with 24 V DC.
The following must also be taken into account:
– CU320-2: 1 A
– TM31: 0.5 A
– AOP30: 0.2 A
– SMC: 0.6 A
– Current requirement of digital inputs/outputs.

⁷⁾ In conjunction with the specified fuses or circuit breakers.

⁸⁾ Minimum current required for reliably triggering the protective devices.

⁹⁾ For option L26 (version A) the low value applies.

¹⁰⁾ The specified power losses are the maximum values for a utilization of 100%. The values are lower under normal operating conditions.

¹¹⁾ Longer cable lengths for specific configurations are available on request.

¹²⁾Version A: The cabinet height increases by
– 250 mm for degree of protection IP21
– 400 mm for degrees of protection IP23, IP43 and IP54
– 405 mm for options M13 and M78

Version C: The cabinet height increases by
– 250 mm for degree of protection IP21
– 400 mm for degrees of protection IP23, IP43 and IP54

Line voltage 500 ... 600 V 3 AC		SINAMICS G150 converter cabinet units 6SL3710-1GF..-....
Single connection		31?8.A3	32?2.A3	32?6.A3	33?3.A3	34?1.A3	34?7.A3	35?8.A3	37?4.A3	38?1.A3
Type rating
For I_Lat 50 Hz 500 V ¹⁾	kW	110	132	160	200	250	315	400	500	560
For I_Hat 50 Hz 500 V ¹⁾	kW	90	110	132	160	200	250	315	450	500
For I_Lat 60 Hz 575 V ²⁾	hp	150	200	250	300	400	450	600	700	800
For I_Hat 60 Hz 575 V ²⁾	hp	150	200	200	250	350	450	500	700	700
Output current
Rated current I_n	A	175	215	260	330	410	465	575	735	810
Base-load current I_L³⁾	A	171	208	250	320	400	452	560	710	790
Base-load current I_H⁴⁾	A	157	192	233	280	367	416	514	657	724
Input current
Rated input current ⁵⁾	A	191	224	270	343	426	483	598	764	842
Input current, max.	A	279	341	410	525	655	740	918	1164	1295
Current requirement, 24 V DC auxiliary power supply ⁶⁾	A	1.35	1.35	1.35	1.4	1.4	1.4	1.4	1.5	1.5
Rated short-circuit current according to IEC ⁷⁾	kA	65	65	65	65	65	65	65	84	84
Minimum short-circuit current ⁸⁾	A	2400	3000	3600	5200	5200	6200	8400	10500	10400/1800 ⁹⁾
Power loss, max. ¹⁰⁾
At 50 Hz 500 V	kW	3.8	4.2	5	6.1	8.1	7.8	8.7	12.7	14.1
At 60 Hz 575 V	kW	3.2	3.6	4.1	5.1	6.7	7.5	8.4	12.5	13.8
Cooling air requirement	m³/s	0.36	0.36	0.36	0.36	0.78	0.78	0.78	1.48	1.48
Sound pressure level L_pA (1 m) at 50/60 Hz	dB	69/73	69/73	69/73	69/73	72/75	72/75	72/75	72/75	72/75
Cable lengths between converter and motor ¹¹⁾
Shielded	m	300	300	300	300	300	300	300	300	300
Unshielded	m	450	450	450	450	450	450	450	450	450
Dimensions
Width for version A/C	mm	800/400	800/400	800/400	800/400	1200/600	1200/600	1200/600	1600/1000	1600/1000
Height ¹²⁾	mm	2000	2000	2000	2000	2000	2000	2000	2000	2000
Depth	mm	600	600	600	600	600	600	600	600	600
Weight, approx. (degree of protection IP20, without options) for version A/C	kg	460/300	460/300	460/300	460/300	750/670	750/670	860/670	1150/940	1150/960

Note: The power data in hp units is based on the NEC/CEC standards for the North American market.

For information on the line connection, motor connection and cabinet grounding, see Section Configuration.

¹⁾ Rated output of a typical 6-pole standard induction motor based on I_L or I_H for 3 AC 50 Hz 500 V.

²⁾ Rated output of a typical 6-pole standard induction motor based on I_L or I_H for 3 AC 60 Hz 575 V.

³⁾ The base-load current I_L is based on a load cycle of 110% for 60 s or 150% for 10 s with a load cycle duration of 300 s. See Characteristic curves, Section Overload capability.

⁴⁾ The base-load current I_H is based on a duty cycle of 150% for 60 s or 160% for 10 s with a duty cycle duration of 300 s. See Characteristic curves, Section Overload capability.

⁵⁾ The currents listed here are based on the rated output current.

⁷⁾ In conjunction with the specified fuses or circuit breakers.

⁸⁾ Minimum current required for reliably triggering the protective devices.

⁹⁾ For option L26 (version A) the low value applies.

¹⁰⁾ The specified power losses are the maximum values for a utilization of 100%. The values are lower under normal operating conditions.

¹¹⁾ Longer cable lengths for specific configurations are available on request.

¹²⁾Version A: The cabinet height increases by
– 250 mm for degree of protection IP21
– 400 mm for degrees of protection IP23, IP43 and IP54
– 405 mm for options M13 and M78

Version C: The cabinet height increases by
– 250 mm for degree of protection IP21
– 400 mm for degrees of protection IP23, IP43 and IP54

Line voltage 660 ... 690 V 3 AC		SINAMICS G150 converter cabinet units 6SL3710-1GH..-....
Single connection		28?5.A3	31?0.A3	31?2.A3	31?5.A3	31?8.A3	32?2.A3	32?6.A3
Type rating
For I_Lat 50 Hz 690 V ¹⁾	kW	75	90	110	132	160	200	250
For I_Hat 50 Hz 690 V ¹⁾	kW	55	75	90	110	132	160	200
Output current
Rated current I_n	A	85	100	120	150	175	215	260
Base-load current I_L²⁾	A	80	95	115	142	171	208	250
Base-load current I_H³⁾	A	76	89	107	134	157	192	233
Input current
Rated input current ⁴⁾	A	93	109	131	164	191	224	270
Input current, max.	A	131	155	188	232	279	341	410
Current requirement, 24 V DC auxiliary power supply ⁵⁾	A	1.1	1.1	1.1	1.1	1.35	1.35	1.35
Rated short-circuit current according to IEC ⁶⁾	kA	65	65	65	65	65	65	65
Minimum short-circuit current ⁷⁾	A	1500	1500	1200	1600	2400	3000	3600
Power loss, max. ⁸⁾ at 50 Hz 690 V	kW	1.7	2.1	2.7	2.8	3.8	4.2	5
Cooling air requirement	m³/s	0.17	0.17	0.17	0.17	0.36	0.36	0.36
Sound pressure level L_pA (1 m) at 50/60 Hz	dB	67/68	67/68	67/68	67/68	67/73	67/73	67/73
Cable lengths between converter and motor ⁹⁾
Shielded	m	300	300	300	300	300	300	300
Unshielded	m	450	450	450	450	450	450	450
Dimensions
Width for version A/C	mm	800/400	800/400	800/400	800/400	800/400	800/400	800/400
Height ¹⁰⁾	mm	2000	2000	2000	2000	2000	2000	2000
Depth	mm	600	600	600	600	600	600	600
Weight, approx. (degree of protection IP20, without options) for version A/C	kg	460/225	460/225	460/225	460/225	670/300	670/300	670/300

Note: The power data in hp units is based on the NEC/CEC standards for the North American market.

For information on the line connection, motor connection and cabinet grounding, see Section Configuration.

¹⁾ Rated output of a typical 6-pole standard induction motor based on I_L or I_H for 3 AC 50 Hz 690 V.

²⁾ The base-load current I_L is based on a load cycle of 110% for 60 s or 150% for 10 s with a load cycle duration of 300 s. See Characteristic curves, Section Overload capability.

³⁾ The base-load current I_H is based on a duty cycle of 150% for 60 s or 160% for 10 s with a duty cycle duration of 300 s. See Characteristic curves, Section Overload capability.

⁴⁾ The currents listed here are based on the rated output current.

⁵⁾ If the drive control is to remain active after a main infeed failure, the converter must be externally supplied with 24 V DC.
The following must also be taken into account:
– CU320-2: 1 A
– TM31: 0.5 A
– AOP30: 0.2 A
– SMC: 0.6 A
– Current requirement of digital inputs/outputs.

⁶⁾ In conjunction with the specified fuses or circuit breakers.

⁷⁾ Minimum current required for reliably triggering the protective devices.

⁸⁾ The specified power losses are the maximum values for a utilization of 100%. The values are lower under normal operating conditions.

⁹⁾ Longer cable lengths for specific configurations are available on request.

¹⁰⁾Version A: The cabinet height increases by
– 250 mm for degree of protection IP21
– 400 mm for degrees of protection IP23, IP43 and IP54
– 405 mm for options M13 and M78

Version C: The cabinet height increases by
– 250 mm for degree of protection IP21
– 400 mm for degrees of protection IP23, IP43 and IP54

Line voltage 660 ... 690 V 3 AC		SINAMICS G150 converter cabinet units 6SL3710-1GH..-....
Single connection		33?3.A3	34?1.A3	34?7.A3	35?8.A3	37?4.A3	38?1.A3
Type rating
For I_Lat 50 Hz 690 V ¹⁾	kW	315	400	450	560	710	800
For I_Hat 50 Hz 690 V ¹⁾	kW	250	315	400	450	560	710
Output current
Rated current I_n	A	330	410	465	575	735	810
Base-load current I_L²⁾	A	320	400	452	560	710	790
Base-load current I_H³⁾	A	280	367	416	514	657	724
Input current
Rated input current ⁴⁾	A	343	426	483	598	764	842
Input current, max.	A	525	655	740	918	1164	1295
Current requirement, 24 V DC auxiliary power supply ⁵⁾	A	1.35	1.4	1.4	1.4	1.5	1.5
Rated short-circuit current according to IEC ⁶⁾	kA	65	65	84	84	85	85
Minimum short-circuit current ⁷⁾	A	5200	5200	6200	8400	10500	10400/1800 ⁸⁾
Power loss, max. ⁹⁾ at 50 Hz 690 V	kW	6.1	8.1	9.1	10.8	13.5	14.7
Cooling air requirement	m³/s	0.36	0.78	0.78	0.78	1.48	1.48
Sound pressure level L_pA (1 m) at 50/60 Hz	dB	67/73	72/75	72/75	72/75	72/75	72/75
Cable lengths between converter and motor ¹⁰⁾
Shielded	m	300	300	300	300	300	300
Unshielded	m	450	450	450	450	450	450
Dimensions
Width for version A/C	mm	800/400	1200/600	1200/600	1200/600	1600/1000	1600/1000
Height ¹¹⁾	mm	2000	2000	2000	2000	2000	2000
Depth	mm	600	600	600	600	600	600
Weight, approx. (degree of protection IP20, without options) for version A/C	kg	670/300	780/670	780/670	840/670	1320/940	1360/980