7KM PAC measuring devices: 7KM PAC3200 (left), 7KM PAC3100 (center) and 7KM PAC4200 (right)

7KM PAC Measuring Devices

The 7KM PAC measuring devices precisely, reproducibly, and reliably measure the power values for infeeds, outgoing feeders or individual loads. They provide not only important data on your electrical installation and power distribution but also key measured values for assessing the system state and power quality. For further processing of the measured data the devices come with manifold communication options for smoother integration in higher-level automation and energy management systems.

• Simple operation
  intuitive user prompting, multi-language plain text Displays
• Fast assembly
  fast, snap-in supports, assembly also possible without Tools
• Wide range of use
  large scope of functions and services, e.g. measurement in 50 und 60 Hz supplies, use in plants with UL/CSA requirements, IP65 through use of standard seals
• Low space requirements
  compact design: 96x96 mm / 3.8x3.8"
• Transparent power distribution
  Start-to-finish detection of energy consumption and basic electrical variables
• Good readability even in difficult light conditions
  large, illuminated graphic LC Display

7KM PAC3100 measuring devices

The Low Budget Device for Digital Measurement.

With 7KM PAC3100 measuring devices it's quick and easy to get started with digital measuring systems. Our entry model supplies you with more than 30 measured values on energy consumption and basic electrical variables, dispensing with the need for a multitude of individual analog measuring instruments. Thanks to its integrated communication interface and its digital inputs and outputs, flexible system integration and adjustments in the plant are always possible with 7KM PAC3100 measuring devices.

• Integrated communication option
  RS485 interface with open protocol (Modbus RTU)
• Flexible adjustments to suit application
  Switch integration and pulse output via 2 digital inputs (internal power supply) and 2 digital Outputs

7KM PAC3200 measuring devices

The Basis for Reliable and Precise Measurements

When, where, and how much energy is used – transparent information is provided by the new 7KM PAC3200 measuring device. This device can be used wherever electrical energy is distributed. 7KM PAC3200 records more than 50 electrical parameters such as voltage, current, powers, energy values, frequency, power factor and asymmetry. The compact control panel instrument supplies basic data which will give you an overview of where electricity is consumed and where energy flows in the electrical system.

• Exact allocation of costs
  high measuring accuracy for energy, class 0.5S in accordance with IEC62053-22 for active energy
• Good readability even under poor lighting conditions
  large, illuminated graphics LC Display
• Simple operation
  intuitive user prompting, multi-language text displays
• Comprehensive recording of consumption
  10 energy meters for active energy, reactive energy and apparent energy, high and low tariffs, import and export
• A variety of communication options
  Integration into every power management system or automation system via Ethernet, PROFIBUS DP or ModbusRTU

7KM PAC4200 measuring devices

Comprehensive and User-Friendly Overview of the Plant Status

7KM PAC4200 measuring device has the same basic features as the 7KM PAC3200 measuring device. It records a total of around 200 measured values, including basic data for assessing the system quality. Furthermore it has convenient additional functions such as user-defined displays, internal device memory, integral time-of-day and calendar function and gateway function.

• Exact allocation of costs
  high measuring accuracy for energy, class 0.2 in accordance with IEC61557-12
• Integration of lower-level devices in Ethernet network
  connection of devices with serial RS485 interface in Ethernet network via integrated gateway function
• Extensive memory functions
  time-related recording in load profile memory and event memory
• Monitoring of plant load resulting from network pollution
  data for assessing the system quality, e.g. odd system harmonics from the 3rd to the 31st for current and voltage, THD in 3-wire and 4-wire systems
• Simple fault analysis and fault prevention
  recording of more than 4000 user-defined operating, control and system events

New: 7KM PAC5100 measuring devices

Specialist solution for measured value acquisition

The 7KM PAC5100 measuring device enables you to record, display and transfer electrical measured values such as voltage, current, power, energy and harmonics up to the 40th harmonic component.

• Flexibility by means of two device versions
  - DIN-rail mounting (without display)
  - Control panel mounting 96 mm x 96 mm x 100 mm (W x H x D)
• Easy operation using the integrated web server
  - Parameterization of all device and communication parameters
  - Online view and evaluation of measured values
• Standard-compliant collection of measured values according to IEC 61000-4-30 Class S
  - True RMS for voltage and current up to the 101st harmonic component / 2028 sample values per 10 periods
  - Frequency
  - Active (Class 0.5S), reactive and apparent power
  - Active, reactive and apparent energy
  - Power factor
  - Asymmetry
  - Measurement up to 40th harmonic of voltage and current (EN 50160)
  - Phase angle
  - Limit value violations
  - Logic operation functions
• Two individually-programmable digital outputs

New: 7KM PAC5200 measuring devices

The expert for supply system quality

The 7KM PAC5200 measuring device records and analyzes measured values according to power quality standard EN 50160. In addition to the functions of the 7KM PAC5100 measuring device, it offers the following features:

• Standards-compliant data recording and report creation
  - IEC 61000-4-30 Class S*
  - IEC 61000-4-15 Flicker
  - IEC 61000-4-7 Harmonics
  - Reporting according to EN 50160
• Integrated logger for flexible recordings
  - Measured value logger (frequency, flicker, voltage, harmonics, power, min./max., etc.)
  - Logger for power quality deviations (voltage spikes, dips and interruptions)
  - Trend logger (Ueff)
  - Event logger (voltage, current)
• Individually selectable layout of the evaluations
  - Power quality reports, e.g. EN50160, ITIC (CBEMA), results of the events or online view directly in the web server
  - Waveforms with COMTRADE Viewer
• Simple further processing of recorded data
  - Data export in the formats PQDif (power quality data), COMTRADE (event logger) and CSV
• 2GB internal memory for the recording function