8GK9650-0KK00

8GK9711-0KK03

Busbar supports

With matching support plate

Versions

• 1-pole
  
  • For Cu busbars 12 ? 5 (10) mm, 20 ? 5 (10) mm, 30 ? 5 (10) mm

5SH3540

• 3-pole
  
  • Busbar center-to-center spacing of 60 mm
  • For Cu busbars 12 ? 5 (10) mm, 20 ? 5 (10) mm, 30 ? 5 (10) mm
  • For bus-mounting fuse bases and 3NP4076 switch disconnectors, used together with assembly kits (mounting directly on the stays)

8GK9711-0KK03

• 4-pole

• Busbar center-to-center spacing of 60 mm
• For Cu busbars 12 ? 5 (10) mm, 30 ? 5 (10) mm
• Mounting internal
• Width: 20 mm

8US1923-4AA00

• 5-pole
  
  • Busbar center-to-center spacing of 40 mm
  • For Cu busbars 12 ? 5 (10) mm and for mounting 3NP fuse switch disconnectors
  • Height 300 mm

8GK9650-0KK00

8GK973.

Cu busbars

Versions

• Cu cross-section 12 ? 5 mm, current 250 A

• Length 250

8GK9731-0KK10

• Length 500

8GK9731-0KK20

• Length 750

8GK9731-0KK30

• Length 1000

8GK9731-0KK40

• Length 1250

8GK9731-0KK50

• Cu cross-section 20 ? 5 mm, current 320 A

• Length 250

8GK9733-0KK10

• Length 500

8GK9733-0KK20

• Length 750

8GK9733-0KK30

• Length 1000

8GK9733-0KK40

• Length 1250

8GK9733-0KK50

• Cu cross-section 30 ? 5 mm, current 450 A

• Length 250

8GK9735-0KK10

• Length 500

8GK9735-0KK20

• Length 750

8GK9735-0KK30

• Length 1000

8GK9735-0KK40

• Length 1250

8GK9735-0KK50

• Cu cross-section of 30 ? 10 mm, current 630 A

• Length 250

8GK9736-0KK10

• Length 500

8GK9736-0KK20

• Length 750

8GK9736-0KK30

• Length 1000

8GK9736-0KK40

• Length 1250

8GK9736-0KK50

8GK9910-0KK30

Supports for front covers

• Long version
• Material plastic
• 1 set = 4 supports

8GK9910-0KK30

8GK9910-0KK11

N/PE bars as plug-in terminals

• For mounting on longitudinal stays at a 30° inclination

Versions

• Each with 6 screw terminals from 2.5 to 16 mm² and 21 plug-in terminals from 1.5 to 4 mm²

8GK9910-0KK11

• With 6 screw terminals from 2.5 to 16 mm² and 21 plug-in terminals from 1.5 to 4 mm² for PE bar and one neutral-neutral bar each with 2 screw terminals from 2.5 to 16 mm² and 10 plug-in terminals from 1.5 to 4 mm²

8GK9910-0KK12

8US1921-2AA00

Terminals for circular conductors

Versions

• Busbar thickness 5 mm

• Conductor cross-section 1.5 ... 16 mm?

8US1921-2AA00

• Conductor cross-section 1.5 ... 35 mm?

8US1921-2AB00

• Conductor cross-section 16 ... 70 mm?

8US1921-2AD00

• Conductor cross-section 16 ... 120 mm?

8US1921-2AC00

• Busbar thickness of 10 mm

• Conductor cross-section 1.5 ... 16 mm?

8US1921-2BA00

• Conductor cross-section 1.5 ... 35 mm?

8US1921-2BB00

• Conductor cross-section 16 ... 70 mm?

8US1921-2BD00

• Conductor cross-section 16 ... 120 mm?

8US1921-2BC00

8GK9920-0KK24

Replacement door hinges

• For wall/floor-mounted distribution boards
• 1 set = 2 hinges

8GK9920-0KK24

8GK9910-0KK00

Blanking strips

Color RAL 7035 (light gray)

Versions

• For 12 MW (1 MW = 18 mm)

8GK9910-0KK00

• Length 1 m
  without pressure-relief joint, to cut to length

8GK9910-0KK01

Connecting kits, IP43/IP55

• For side-by-side mounting of enclosures
• Comprising:
  
  • Screws
  • Washers
  • Nuts
  • 10 m roll of sealing strip

8GK9920-0KK31

Note

a bushing flange is required for electrical connections!

8GK9910-1KK80

Cable holders

For standard mounting rails

8GK9910-1KK80

8GD9290

Spare keys

For double-bit locking mechanism

8GD9290

8GK9910-0KK34

Extra-deep brackets

For recessed installation of stand. mounting rails

8GK9910-0KK34

8GK9910-0KK26

Quick-lock screws

• Material plastic
• Color RAL 7035

8GK9910-0KK26

8GK9910-0KK27

Assembly tools

• For supports
• Short and long version
• With ergonomic handle

8GK9910-0KK27

8GK9910-0KK35

Standard mounting rails, lowered

Width

• 250 mm

8GK9910-0KK35

• 500 mm

8GK9910-0KK40

• 750 mm

8GK9910-0KK41