SIMATIC ET 200eco . Дизайн. Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIMATIC ET 200eco

| | | | | | |

SIMATIC ET 200eco

ET 200eco comprises a basic module and terminal block.

For implementing and integrating PROFIBUS applications, a compact perfectly interacting module spectrum is available for digital I/Os:

Number of channels	Type of connection
8 DI	8 single channels via 8x M12 screwed glands for 8 digital input signals
16 DI	16 channels via 8x M12 screwed glands with dual assignment for 16 digital input signals
8 DO	8 single channels via 8x M12 screwed glands for 8 digital output signals (2A)
16 DO	16 channels via 8x M12 screwed glands with dual assignment for 16 digital output signals (0.5 A)
8 DI / 8 DO (1.3 A)	16 channels via 8x M12 screwed glands with dual assignment for 8 digital inputs and 8 digital output signals (1.3 A)
8 DI / 8 DO (2.0 A)	16 channels via 8x M12 screwed glands with dual assignment for 8 digital inputs and 8 digital output signals (2.0 A)
4/8F-DI	Up to 4 channels (Cat. 4, SIL 3) or up to 8 channels (Cat. 3, SIL 2)

Via the variable and flexible terminal blocks, PROFIBUS DP can be connected as required via 2x M12, 2x7/8" or 2x hybrid fieldbus interfaces (ECOFAST).

The T functions for PROFIBUS DP and the power supply are integrated in the terminal block which means that installations can be operated without interruption and without the need for additional components during the commissioning and maintenance of bus lines.

The pin assignment for the actuators and sensors are adapted to the degree of protection IP65/67 standardization trend.

Depending on the type of terminal block, the PROFIBUS address is set either visually or using plug-in jumpers.

In ECOFAST interfaces, the well-proven identification connector is implemented; in M12, 7/8" interfaces, two rotary coding switches visible from the outside are used to set the PROFIBUS address.