1BA1: ASIsafe channel 1 on 1 NC contact from the actuator and channel 2 on 1 NC contact from the solenoid
1BA3: ASIsafe channel 1 on the first NC contact from the actuator and channel 2 on the second NC contact from the actuator
1BA4: ASIsafe channel 1 on 2 NC contacts (two-channel) from the actuator, and channel 2 on 1 NC contact from the solenoid. The position switch transfers the information of actuators to a transfer channel because the discrepancy of the two actuator contacts is already evaluated in the switch.
The 3SF1324-1S.21-1BA4 safety switches are also recommended where there are several protective door tumblers and reliable diagnostics and quick restart capability of equipment is required.
A response is received from the magnet.
No opening of the doors after the solenoid is unlocked.
In connection with an ASIsafe MSS modular safety system or a DP/AS-i F-Link, it is possible to achieve SIL 2 according to IEC 61508 or PL d according to ISO 13849-1. They comply with the standard EN ISO 14119. A TUV certificate is available.
Properties
Slow-action contacts
5 directions of approach
Magnet: Rated operational voltage 24 V DC
1 300 N locking force
Degree of protection IP66/IP67 (IP69K)
Status display with 4 LEDs 24 V DC; 1: AS-i, 2: FAULT, 3: F–IN1, 4: F–IN2
Comparison of versions
Safety switch Type
Contacts
Actuator / solenoid
Achievable safety level
Diagnostics
Feedback from the solenoid
Reclosing condition
after unlocking the magnet (depending on the type of evaluation)
