SCALANCE W721-1 RJ45

• A wireless card permanently installed in the device
• Compact design for space-saving installation in control cabinets or boxes on a standard mounting rail
• Implementation of simple and cost-effective wireless networking
• Degree of protection IP20
• For use at ambient temperatures from 0 to +55 °C
• Supports IEEE 802.11a/b/g/h/n; 2.4 GHz and 5 GHz frequency band; data transfer rate up to 150 Mbit/s
• 1 ? R-SMA socket for the connection of a remote antenna
• 1 ? RJ45 port for 10/100 Mbit/s
• 1 ? 24 V DC connection
• Function LEDs for optical signaling of faults and operating states
• SIMATIC design matches existing components in the control cabinet (e.g. ET 200SP)

SCALANCE W722-1 RJ45

• A wireless card is permanently installed in the device; suitable for establishing wireless connections with iFeatures, e.g. cyclic real-time data transfer and very fast roaming (iPCF, iPCF MC)
• Further properties as described under SCALANCE W721?1 RJ45

SCALANCE W734-1 RJ45

• A wireless card is permanently installed in the device; functional scope can be expanded by using a KEY-PLUG W740 iFeatures
• Low-profile, compact aluminum enclosure, shock and vibration-proof for high mechanical requirements
• Implementation of simple and cost-effective wireless networking
• Degree of protection IP20
• For use at ambient temperatures from -20 ... +60 °C
• Supports IEEE 802.11a/b/g/h/n; 2.4 GHz and 5 GHz frequency band; data transfer rate up to 300 Mbit/s
• 2 ? R-SMA sockets for the connection of direct mountable and remote antennas
• Antenna placement optimized for the 2?2 MIMO technology; the antennas do not interfere with each other when they are mounted directly on the device
• 2 ? RJ45 connector for 10/100/1000 Mbit/s, of which one connector with Power-over-Ethernet according to IEEE 802.3at
• 2 ? 24 V DC connection for redundant power infeed
• 1 ? PLUG compartment for KEY-PLUG/C-PLUG
• Function LEDs for optical signaling of faults and operating states
• Mounting on wall, S7-1500 rail, S7-300 rail, or 35 mm standard rail
• SIMATIC design matches existing components in the control cabinet

SCALANCE W748-1 RJ45

• A wireless card is permanently installed in the device; functional scope can be expanded by using a KEY-PLUG W780 iFeatures
• Rugged aluminum enclosure, shock and vibration-proof, for high mechanical requirements
• Dust protection with IP30 degree of protection
• For use at ambient temperatures from -20 ... +60 °C
• Supports IEEE 802.11a/b/g/h/n; 2.4 GHz and 5 GHz frequency band; data transfer rate up to 450 Mbit/s
• 3 ? R-SMA sockets for the connection of directly mountable and remote antennas (6 ? R-SMA sockets for the variants with 2 wireless modules)
• Antenna placement optimized for the 3?3 MIMO technology; the antennas do not interfere with each other when they are mounted directly on the device
• 1 ? RJ45 connector for 10/100/1 000 Mbit/s with Power-over-Ethernet according to IEEE 802.3at
• 2 ? 24 V DC connection for redundant power infeed
• 1 ? PLUG compartment for KEY-PLUG/C-PLUG
• Function LEDs for optical signaling of faults and operating states
• Digital input for feeding in a signal (e.g. from a sensor) to an SNMP-based network management system
• Digital output for converting a command received over SNMP into a signal and switching a hardware function
• Mounting on wall, S7-1500 rail, S7-300 rail, or 35 mm standard rail

SCALANCE W761-1 RJ45

• A wireless card permanently installed in the device
• Compact design for space-saving installation in control cabinets or boxes on a standard mounting rail
• Implementation of simple and cost-effective wireless networking
• Degree of protection IP20
• For use at ambient temperatures from 0 ... +55 °C
• Supports IEEE 802.11a/b/g/h/n; 2.4 GHz and 5 GHz frequency band; data transfer rate up to 150 Mbit/s
• 1 ? R-SMA socket for the connection of a remote antenna
• 1 ? RJ45 port for 10/100 Mbit/s
• 1 ? 24 V DC connection
• Function LEDs for optical signaling of faults and operating states
• SIMATIC design matches existing components in the control cabinet (e.g. ET 200SP)

SCALANCE W774-1 RJ45

• A wireless card is permanently installed in the device; functional scope can be expanded by using a KEY-PLUG W780 iFeatures
• Low-profile, compact aluminum enclosure, shock and vibration-proof for high mechanical requirements
• Implementation of simple and cost-effective wireless networking
• Degree of protection IP20
• For use at ambient temperatures from -20 ... +60 °C
• Supports IEEE 802.11a/b/g/h/n; 2.4 GHz and 5 GHz frequency band; data transfer rate up to 300 Mbit/s
• 2 ? R-SMA sockets for the connection of direct mountable and remote antennas
• Antenna placement optimized for the 2?2 MIMO technology; the antennas do not interfere with each other when they are mounted directly on the device
• 2 ? RJ45 connector for 10/100/1000 Mbit/s, of which one connector with Power-over-Ethernet according to IEEE 802.3at
• 2 ? 24 V DC connection for redundant power infeed
• 1 ? PLUG compartment for KEY-PLUG/C-PLUG
• Function LEDs for optical signaling of faults and operating states
• Mounting on wall, S7-1500 rail, S7-300 rail, or 35 mm standard rail
• SIMATIC design matches existing components in the control cabinet (e.g. ET 200SP)

SCALANCE W788 RJ45

• Two product versions; functional scope can be expanded by KEY?PLUG W780 iFeatures:
  • SCALANCE W788?1 RJ45 with one wireless card permanently installed
  • SCALANCE W788-2 RJ45 with two wireless cards permanently installed
• Rugged aluminum enclosure, shock and vibration-proof, for high mechanical requirements
• Dust protection with IP30 degree of protection
• For use at ambient temperatures from -20 ... +60 °C
• Supports IEEE 802.11a/b/g/h/n; 2.4 GHz and 5 GHz frequency band; data transfer rate up to 450 Mbit/s
• 3 ? R-SMA sockets for the connection of directly mountable and remote antennas (6 ? R-SMA sockets for the variants with 2 wireless modules)
• Antenna placement optimized for the 3?3 MIMO technology; the antennas do not interfere with each other when they are mounted directly on the device
• 1 ? RJ45 connector for 10/100/1 000 Mbit/s with Power-over-Ethernet according to IEEE 802.3at
• 2 ? 24 V DC connection for redundant power infeed
• 1 ? PLUG compartment for KEY-PLUG/C-PLUG
• Function LEDs for optical signaling of faults and operating states
• Digital input for feeding in a signal from a sensor, for example, to an SNMP-based network management system
• Digital output for converting a command received over SNMP into a signal and switching a hardware function
• Mounting on wall, S7-1500 rail, S7-300 rail, or 35 mm standard rail

SCALANCE W748-1 M12

• A wireless card is permanently installed in the device; functional scope can be expanded by using a KEY-PLUG W780 iFeatures
• Rugged aluminum enclosure, shock and vibration-proof, for high mechanical requirements
• High IP65 degree of protection against dust and water jets
• For use at ambient temperatures from -20 ... +60 °C
• Supports IEEE 802.11a/b/g/h/n; 2.4 GHz and 5 GHz frequency band; data transfer rate up to 450 Mbit/s
• 3 ? N-Connect sockets for the connection of directly mountable and remote antennas (6 ? N-Connect sockets for the variants with 2 wireless modules)
• Antenna placement optimized for the 3?3 MIMO technology; the antennas do not interfere with each other when they are mounted directly on the device
• 1 ? M12 connector for 10/100/1 000 Mbit/s with Power-over-Ethernet according to IEEE 802.3at
• 1 ? M12 socket for power supply (24 V DC)
• 1 ? PLUG compartment (KEY-PLUG/C-PLUG)
• Function LEDs for optical signaling of faults and operating states
• Mounting on wall, S7-1500 rail, S7-300 rail, or 35 mm standard rail

SCALANCE W788 M12

• Two product versions; functional scope can be expanded by KEY?PLUG W780 iFeatures:
  • SCALANCE W788?1 M12 with one wireless card permanently installed
  • SCALANCE W788?2 M12 with two wireless cards permanently installed
• Rugged aluminum enclosure, shock and vibration-proof, for high mechanical requirements
• High IP65 degree of protection against dust and water jets
• For use at ambient temperatures from -20 ... +60 °C
• Supports IEEE 802.11a/b/g/h/n; 2.4 GHz and 5 GHz frequency band; data transfer rate up to 450 Mbit/s
• 3 ? N-Connect sockets for the connection of directly mountable and remote antennas (6 ? N-Connect sockets for the variants with 2 wireless modules)
• Antenna placement optimized for the 3?3 MIMO technology; the antennas do not interfere with each other when they are mounted directly on the device
• 1 ? M12 connector for 10/100/1 000 Mbit/s with Power-over-Ethernet according to IEEE 802.3at
• 1 ? M12 socket for power infeed (24 V DC)
• 1 ? PLUG compartment (KEY-PLUG/C-PLUG)
• Function LEDs for optical signaling of faults and operating states
• Mounting on wall, S7-1500 rail, S7-300 rail, or 35 mm standard rail

SCALANCE W788-2 M12 EEC for enhanced environmental conditions

Main features like SCALANCE W788 M12. Deviating or additional features:

• Two wireless cards are permanently installed; functional scope can be expanded by KEY-PLUG W780 iFeatures
• For use at ambient temperatures from ?40 ... +70 °C
• 6 ? N-Connect sockets for the connection of direct mountable and remote antennas
• Special coating of the printed circuit boards (conformal coating)
• Resistant to condensation
• Railroad approval in accordance with EN 50155

SCALANCE W786 RJ45

• Three product versions; functional scope can be expanded by KEY?PLUG W780 iFeatures:
  • SCALANCE W786-1 RJ45 with 1 wireless card permanently installed in the device; connections for 3 external antennas
  • SCALANCE W786-2 RJ45 with 2 radio cards permanently installed; connections for 6 external antennas
  • SCALANCE W786-2IA RJ45 with 2 radio cards permanently installed; 6 internal antennas
• Rugged, impact-resistant plastic enclosure, shock and vibration-proof for demanding mechanical requirements
• High IP65 degree of protection against dust and water jets
• For use at ambient temperatures from -40 ... +60 °C
• Supports IEEE 802.11a/b/g/h/n; 2.4 GHz and 5 GHz frequency band; data transfer rate up to 450 Mbit/s
• Resistant to condensation
• Resistant to UV radiation and salt spray
• 3 ? R-SMA sockets for the connection of remote antennas (6 ? R-SMA sockets or 6 internal antennas for the variants with 2 wireless modules)
• 1 ? RJ45 connector for 10/100/1 000 Mbit/s and Power-over-Ethernet according to IEEE 802.3at
• 1 ? 24 V DC connection, optional operation with 12 to 24 V DC or 100 to 240 V AC with power supply integrated into device
• 1 ? PLUG compartment (KEY-PLUG/C-PLUG)
• Function LEDs for optical signaling of faults and operating states
• Resistant to destruction through connections within the device
• Mounting on wall, with optional mounting set on S7 rail, 35 mm standard rail, or on a pole
• Can also be configured as client modules (max. 1 wireless module) using the web-based management system

SCALANCE W786-2 SFP

Main features like SCALANCE W786 RJ45. Deviating or additional features:

• Two wireless cards permanently installed in the device; can be expanded to establish wireless connections with KEY-PLUG W780 iFeatures
• Two slots for SFP plug-in transceivers (optical 2-port switch)
• For use at ambient temperatures from -40 °C ... +60 °C (depending on the SFP plug-in transceiver used)
• 6 ? R-SMA sockets for the connection of remote antennas