SIPLUS LOGO! modular basic variants . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS LOGO! modular basic variants

| | | | | |

SIPLUS LOGO! modular basic variants

Article number	6AG1052-1CC01-7BA8	6AG1052-1MD00-7BA8	6AG1052-1HB00-7BA8	6AG1052-1FB00-7BA8
	SIPLUS LOGO! 24CE	SIPLUS LOGO! 12/24RCE	SIPLUS LOGO! 24RCE	SIPLUS LOGO! 230RCE
Display
with display	Yes; The display is bright at temperatures below 0 °C and dark at temperatures over +55 °C. This procedure is self-reversing on returning to the standard temperature range (0 °C to +55 °C).	Yes; The display is bright at temperatures below 0 °C and dark at temperatures over +55 °C. This procedure is self-reversing on returning to the standard temperature range (0 °C to +55 °C).	Yes; The display is bright at temperatures below 0 °C and dark at temperatures over +55 °C. This procedure is self-reversing on returning to the standard temperature range (0 °C to +55 °C).	Yes; The display is bright at temperatures below 0 °C and dark at temperatures over +55 °C. This procedure is self-reversing on returning to the standard temperature range (0 °C to +55 °C).
Installation type/mounting
Mounting	on 35 mm DIN rail, 4 spacing units wide	on 35 mm DIN rail, 4 spacing units wide	on 35 mm DIN rail, 4 spacing units wide	on 35 mm DIN rail, 4 spacing units wide
Supply voltage
Rated value (DC)
? 12 V DC		Yes
? 24 V DC	Yes	Yes	Yes
? 115 V DC				Yes
? 230 V DC				Yes
permissible range, lower limit (DC)	20.4 V	10.8 V	20.4 V	100 V
permissible range, upper limit (DC)	28.8 V	28.8 V	28.8 V	253 V
Rated value (AC)
? 24 V AC			Yes
? 115 V AC				Yes
? 230 V AC				Yes
Time of day
Time switching clocks
? Number	190	190	190	190
? Power reserve	480 h	480 h	480 h	480 h
Digital inputs
Number of digital inputs	8; Of which 4 can be used in analog mode (0 to 10 V)	8; Of which 4 can be used in analog mode (0 to 10 V)	8	8
Digital outputs
Number of digital outputs	4; Transistor	4; Relays	4; Relays	4; Relays
Short-circuit protection	Yes; electrical (1 A)	No; external fusing necessary	No; external fusing necessary	No; external fusing necessary
Output current
? for signal "1" permissible range for 0 to 55 °C, max.	0.3 A	10 A
Relay outputs
Switching capacity of contacts
— with inductive load, max.		3 A	3 A	3 A
— with resistive load, max.		10 A	10 A	10 A
EMC
Emission of radio interference acc. to EN 55 011
? Limit class B, for use in residential areas	Yes; Radio interference suppression according to EN55011, Limit Value Class B	Yes	Yes	Yes
Degree and class of protection
Degree of protection acc. to EN 60529
? IP20	Yes	Yes	Yes	Yes
Standards, approvals, certificates
CE mark	Yes	Yes	Yes	Yes
developed in accordance with IEC 61131	Yes	Yes	Yes	Yes
according to VDE 0631	Yes	Yes	Yes	Yes
Ambient conditions
Ambient temperature during operation
? min.	-10 °C; = Tmin; Startup @ 0 °C	-10 °C; = Tmin; Startup @ 0 °C	-10 °C; = Tmin; Startup @ 0 °C	-10 °C; = Tmin; Startup @ 0 °C
? max.	60 °C; Tmax; Tmax > +55 °C max. load 0.2 A per output	60 °C; Tmax; Tmax > +55 °C max. load 1 A per relay or max. load 3 A per relay and half the number of DIs (no adjacent points)	60 °C; Tmax; Tmax > +55 °C max. load 1 A per relay or max. load 3 A per relay and half the number of DIs (no adjacent points)	60 °C; Tmax; Tmax > +55 °C max. load 1 A per relay
Ambient temperature during storage/transportation
? min.	-40 °C	-40 °C	-40 °C	-40 °C
? max.	70 °C	70 °C	70 °C	70 °C
Extended ambient conditions
? relative to ambient temperature-atmospheric pressure-installation altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
? At cold restart, min.	0 °C	0 °C	0 °C	0 °C
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation	100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation	100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation	100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation
Resistance
— against biologically active substances / conformity with EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Dimensions
Width	71.5 mm	71.5 mm	71.5 mm	71.5 mm
Height	90 mm	90 mm	90 mm	90 mm
Depth	60 mm	60 mm	60 mm	60 mm

Article number	6AG1052-1MD00-2BA7	6AG1052-1FB00-2BA7
	SIPLUS LOGO!12/24RCE	SIPLUS LOGO! 230RCE
Display
with display	Yes	Yes
Installation type/mounting
Mounting	on 35mm DIN rail, 6 spacing units wide	on 35mm DIN rail, 6 spacing units wide
Supply voltage
Rated value (DC)
? 12 V DC	Yes
? 24 V DC	Yes
? 115 V DC		Yes
? 230 V DC		Yes
permissible range, lower limit (DC)	10.8 V	100 V
permissible range, upper limit (DC)	28.8 V	253 V
Rated value (AC)
? 115 V AC		Yes
? 230 V AC		Yes
Time of day
Time switching clocks
? Number	333	333
? Power reserve	480 h	480 h
Digital inputs
Number of digital inputs	8; of which 4 can be used in analog mode (0 to 10 V); max. load 9 A per relay @ all DI @ +55 °C to +60 °C; max. load 1 A per relay @ all DI @ > +60 °C; max. load 3 A per relay @ half the number of DI @ > +60 °C	8; half the number of DI @ max. load 1A per relay @ > +60 °C
Digital outputs
Number of digital outputs	4; Relays	4; Relays
Short-circuit protection	No; external fusing necessary	No; external fusing necessary
Relay outputs
Switching capacity of contacts
— with inductive load, max.	3 A	3 A
— with resistive load, max.	10 A; max. last 9 A per relay @ all DI @ +55 °C to +60 °C; max. load 1 A per relay @ all DI @ > +60 °C; max. load 3 A per relay @ half the number of DI @ > +60 °C	10 A; max. load 1A per relay @ half the number of DI @ > +60 °C
EMC
Emission of radio interference acc. to EN 55 011
? Limit class B, for use in residential areas	Yes; Radio interference suppression according to EN55011, Limit Value Class B	Yes; Radio interference suppression according to EN55011, Limit Value Class B
Degree and class of protection
Degree of protection acc. to EN 60529
? IP20	Yes	Yes
Standards, approvals, certificates
CSA approval		Yes
UL approval	Yes	Yes
FM approval		Yes
developed in accordance with IEC 61131	Yes	Yes
according to VDE 0631	Yes	Yes
Marine approval
? Marine approval		Yes
Ambient conditions
Ambient temperature during operation
? min.	-25 °C; = Tmin	-25 °C; = Tmin
? max.	70 °C; = Tmax	70 °C; = Tmax
Extended ambient conditions
? relative to ambient temperature-atmospheric pressure-installation altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions)	100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions)
Resistance
— against biologically active substances / conformity with EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3	Yes; Class 3C4 incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Dimensions
Width	107 mm	107 mm
Height	90 mm	90 mm
Depth	55 mm	55 mm

Article number	6AG1052-1CC01-2BA6	6AG1052-1MD00-2BA6	6AG1052-1HB00-2BA6	6AG1052-1FB00-2BA6
	SIPLUS LOGO! 24C	SIPLUS LOGO! 12/24RC	SIPLUS LOGO! 24RC	SIPLUS LOGO! 230RC
Display
with display	Yes; The display is bright at temperatures below 0 °C and dark at temperatures over +55 °C. This procedure is self-reversing on returning to the standard temperature range (0 °C to +55 °C).	Yes; The display is bright at temperatures below 0 °C and dark at temperatures over +55 °C. This procedure is self-reversing on returning to the standard temperature range (0 °C to +55 °C).	Yes; The display is bright at temperatures below 0 °C and dark at temperatures over +55 °C. This procedure is self-reversing on returning to the standard temperature range (0 °C to +55 °C).	Yes; The display is bright at temperatures below 0 °C and dark at temperatures over +55 °C. This procedure is self-reversing on returning to the standard temperature range (0 °C to +55 °C).
Installation type/mounting
Mounting	on 35 mm DIN rail, 4 spacing units wide	on 35 mm DIN rail, 4 spacing units wide	on 35 mm DIN rail, 4 spacing units wide	on 35 mm DIN rail, 4 spacing units wide
Supply voltage
Rated value (DC)
? 12 V DC		Yes
? 24 V DC	Yes	Yes	Yes
? 115 V DC				Yes
? 230 V DC				Yes
permissible range, lower limit (DC)	20.4 V; 22 V @ >55 °C	10.8 V; 11 V @ >55 °C	20.4 V; 22 V @ >55 °C	100 V
permissible range, upper limit (DC)	28.8 V; 27.5 V @ >55 °C	28.8 V; 27.5 V @ >55 °C	28.8 V; 27.5 V @ >55 °C	253 V
Rated value (AC)
? 24 V AC			Yes
? 115 V AC				Yes
? 230 V AC				Yes
Time of day
Time switching clocks
? Number	190	8
? Power reserve	80 h	80 h	80 h	80 h
Digital inputs
Number of digital inputs	8; Of which 4 can be used in analog mode (0 to 10 V)	8; Of which 4 can be used in analog mode (0 to 10 V)	8	8
Digital outputs
Number of digital outputs	4; Transistor	4; Relays	4; Relays	4; Relays
Short-circuit protection	Yes; electrical (1 A)	No; external fusing necessary	No; external fusing necessary	No; external fusing necessary
Output current
? for signal "1" permissible range for 0 to 55 °C, max.	0.3 A; 0.2 A @ > 55 °C; 0.3 A @ > 55 °C & < 15 s
Relay outputs
Switching capacity of contacts
— with inductive load, max.		3 A; 1 A per relay @ > 55 °C; 3 A per relay @ > 55 °C & < 15 s	3 A; 1 A per relay @ > 55 °C; 3 A per relay @ > 55 °C & < 15 s	3 A; 1 A per relay @ > 55 °C; 3 A per relay @ > 55 °C & < 15 s
— with resistive load, max.		10 A; 3 A per relay @ > 55 °C; 10 A per relay @ > 55 °C & < 15 s	10 A; 3 A per relay @ > 55 °C; 10 A per relay @ > 55 °C & < 15 s	10 A; 3 A per relay @ > 55 °C; 10 A per relay @ > 55 °C & < 15 s
EMC
Emission of radio interference acc. to EN 55 011
? Limit class B, for use in residential areas	Yes; Radio interference suppression according to EN55011, Limit Value Class B	Yes	Yes	Yes
Degree and class of protection
Degree of protection acc. to EN 60529
? IP20	Yes	Yes	Yes	Yes
Standards, approvals, certificates
CSA approval	No	No	No	No
UL approval	Yes; File: E120869 // Tmax = 55 °C	Yes; File: E120869 // Tmax = 55 °C	Yes; File: E120869 // Tmax = 55 °C	Yes; File: E120869 // Tmax = 55 °C
FM approval	No	No	No	No
developed in accordance with IEC 61131	Yes	Yes	Yes	Yes
according to VDE 0631	Yes	Yes	Yes	Yes
Marine approval
? Marine approval	No	No	No	No
Ambient conditions
Ambient temperature during operation
? min.	-25 °C; = Tmin	-25 °C; = Tmin	-25 °C; = Tmin	-25 °C; = Tmin
? max.	70 °C; = Tmax; 55 °C @ UL/cUL use	70 °C; = Tmax; 55 °C @ UL/cUL use	70 °C; = Tmax; 55 °C @ UL/cUL use	70 °C; = Tmax; 55 °C @ UL/cUL use
Extended ambient conditions
? relative to ambient temperature-atmospheric pressure-installation altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions)	100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions)	100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions)	100 %; Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions)
Resistance
— against biologically active substances / conformity with EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3	Yes; Class 3C4 incl. salt spray. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 incl. salt spray. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 incl. salt spray. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 incl. salt spray. The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Dimensions
Width	72 mm	72 mm	72 mm	72 mm
Height	90 mm	90 mm	90 mm	90 mm
Depth	55 mm	55 mm	55 mm	55 mm

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания