SIWAREX U is available with either one or two measuring channels. One measuring channel is required for each set of scales.

The primary task of SIWAREX U is the measurement of sensor voltage and the conversion of this measurement into a weight value. The signal can also be digitally filtered if required.

As well as determining weights, the SIWAREX MS monitors two freely programmable limits (min./max. as required).

The SIWAREX U comes factory-calibrated. This means that theoretical adjustment of the scale is possible without adjustment weights, and that modules can be replaced without the need to readjust the scale. When using "active bus modules", replacement is also possible during operation.

Consistent and uniform communication between all system components enables fast, reliable and cost-effective integration and diagnosis in industrial processes.

The SIWAREX U has two serial interfaces. The TTY interface serves to connect up to four digital remote displays. In addition to the two weight values of weighing channels 1 and 2, another two values can be set via SIMATIC and indicated on the remote displays.

A PC for adjusting the scale can be connected through the RS 232 interface.

SIWAREX U can not only be integrated in the plant software using the classic PLC programming languages; STL (Statement List), LD (Ladder Diagram) SFC (Sequential Function Chart) or SCL (Structured Control Language), it can also be integrated by means of graphical configuration with CFCs (Continuous Function Chart), where faceplates are provided in PCS 7 for visualization of the scales.

In contrast to serially linked weighing electronics, SIWAREX U does not need costly additional modules to link it to SIMATIC.

Integration in SIMATIC produces freely-programmable, modular weighing systems which can be modified according to operational requirements.

Using the SIWATOOL U software, the SIWAREX weighing modules can be set up with the convenience of Windows independently of the automation system. Input masks allow all parameters for the weighing modules to be specified, saved and printed for plant documentation.

The diverse diagnostic options provided by SIWATOOL U ensure fast fault locating in online mode.

The SIWAREX U weighing module can be used for potentially explosive areas (zone 2). The load cells can be provided with an intrinsically-safe power supply through an optional Ex interface.