The module provides the encoder supply.

It has the following mechanical features:

• Compact configuration;
  The rugged plastic housing contains:
  • Fault LEDs (GF)
  • LEDs to indicate that the counter is running (CR) and the counting direction (DIR)
  • LEDs for digital input and output modules.
  • Slot for the front connector, protected by the front cover
  • Labeling area on the front cover
• Easy installation:
  The module is simply mounted in the rack and screwed tight. It can be fitted with a coding key, which assigns it permanently to a specific slot.
• Coding connector (measurement range module for analog inputs) for selecting the type of encoder (5 V or 24 V)
• User-friendly wiring:
  The module is wired by means of a plug-in front connector. When the connector is plugged in for the first time a coding element in the module engages, so that the connector can only be plugged into modules of the same type. When the module is replaced, the front connector can be used in its fully wired state for the new module of the same type.
  

Configuring package

The configuring package required for configuration comprises:

• “Getting Started” instructions
• Manual
• Parameterization screen forms
• Standard function blocks for data exchange with the CPU