Input characteristic curve in accordance with IEC 61131, type 1
Yes
Yes
Yes
Yes
Yes
Yes; 2-wire sensors connectable
Number of simultaneously controllable inputs
? Number of simultaneously controllable inputs
8
Input voltage
? Type of input voltage
DC
DC
DC
DC
DC
DC
? Rated value (DC)
24 V
24 V
24 V
24 V
24 V
24 V
? for signal "0"
-30 to +5V
-30 to +5V
-30 to +5V
-30 to +5V
-5 to +30V
-30 to +5V
? for signal "1"
+15 to +30V
+11 to +30V
+15 to +30V
+11 to +30V
-15 to -30 V
+15 to +30V
Input current
? for signal "1", typ.
7 mA; at 24 V
8 mA
7 mA; at 24 V
8 mA
7 mA; at 24 V
5 mA
Input delay (for rated value of input voltage)
for standard inputs
— parameterizable
No
Yes; 0.1 / 0.5 / 3 / 15 ms
No
Yes; 0.1 / 0.5 / 3 / 15 ms
No
No
— at "0" to "1", min.
2 ms; typically 3 ms
0.05 / 0.4 / 2.7 / 14.85
2 ms; typically 3 ms
0.05 / 0.4 / 2.7 / 14.85
2 ms; typically 3 ms
2 ms
— at "0" to "1", max.
4.5 ms
0,15 / 0,6 / 3,3 / 15,15
4.5 ms
0,15 / 0,6 / 3,3 / 15,15
4.5 ms
4.5 ms
— at "1" to "0", min.
2 ms; typically 3 ms
0.05 / 0.4 / 2.7 / 14.85
2 ms; typically 3 ms
0.05 / 0.4 / 2.7 / 14.85
2 ms; typically 3 ms
2 ms
— at "1" to "0", max.
4.5 ms
0,15 / 0,6 / 3,3 / 15,15
4.5 ms
0,15 / 0,6 / 3,3 / 15,15
4.5 ms
4.5 ms
Cable length
? shielded, max.
1 000 m
1 000 m
1 000 m
1 000 m
1 000 m
1 000 m
? unshielded, max.
600 m
600 m
600 m
600 m
600 m
600 m
Encoder
Connectable encoders
? 2-wire sensor
Yes
Yes
Yes
Yes
Yes
Yes
— permissible quiescent current (2-wire sensor), max.
1.5 mA
1.5 mA
1.5 mA
1.5 mA
1.5 mA
1.5 mA
Isochronous mode
Isochronous operation (application synchronized up to terminal)
Yes; TWE = 3000 us
Interrupts/diagnostics/status information
Diagnostic functions
No
Yes
No
Yes
No
No
Alarms
? Hardware interrupt
Yes; Parameterizable
Diagnostic messages
? Short-circuit
Yes; Short-circuit of outputs to ground; module by module
Yes; Short-circuit of outputs to ground; module by module
Diagnostics indication LED
? Group error SF (red)
No
Yes
No
Yes
No
? Status indicator digital input (green)
Yes; per channel
Yes; per channel
Yes; per channel
Yes; per channel
Yes; per channel
Yes
Parameter
Remark
1 byte
3 byte
1 byte
3 byte
1 byte
3-byte parameter (not accessible for the user)
Diagnostics short-circuit
Disable / enable
Disable / enable
Potential separation
Potential separation digital inputs
? between the channels
No
No
No
No
No
No
? between the channels and backplane bus
Yes
Yes
Yes
Yes
Yes
Yes
Permissible potential difference
between different circuits
75 V DC/60 V AC
75 V DC/60 V AC
75 V DC/60 V AC
75 V DC/60 V AC
75 V DC/60 V AC
75 V DC/60 V AC
Isolation
Isolation tested with
500 V DC
500 V DC
500 V DC
500 V DC
500 V DC
500 V DC
Dimensions
Width
15 mm
15 mm
15 mm
15 mm
15 mm
15 mm
Height
81 mm
81 mm
81 mm
81 mm
81 mm
81 mm
Depth
52 mm
52 mm
52 mm
52 mm
52 mm
52 mm
Weights
Weight, approx.
35 g
35 g
35 g
35 g
35 g
35 g
Article number
6ES7131-4CD02-0AB0
6ES7131-4EB00-0AB0
6ES7131-4FB00-0AB0
6ES7131-4RD02-0AB0
6ES7131-4BF50-0AA0
ET200S, EL-MOD., 4DI, UC 24-48V, 5 PCS
ET200S, EL-MOD., 2DI, AC 120V, 5PCS.
ET200S, EL-MOD., 2DI, AC 230V, 5PCS.
ET200S, EL-MOD., 4DI DC 24V NAMUR
ET 200S, 8 DI Source Input DC24V
Supply voltage
Rated value (DC)
? 24 V DC
Yes; From power module
Yes
Yes; From power module
Rated value (AC)
? 24 V AC
Yes
? 120 V AC
Yes; From power module
? 230 V AC
Yes
Reverse polarity protection
Yes; AC or DC automatic
Yes
Input current
from supply voltage L+, max.
Dependent on encoder
Dependent on encoder
from supply voltage L1, max.
Dependent on encoder
Dependent on encoder
from backplane bus 3.3 V DC, max.
10 mA
6 mA
6 mA
Encoder supply
Number of outputs
1
Type of output voltage
min. L+ (-0.5 V), under load
min. 8.2 V, loaded
Short-circuit protection
Yes; per module
Yes; Electronic
Output current
? Rated value
500 mA
45 mA
? permissible range
0 to 500 mA
Power loss
Power loss, typ.
0.7 W
0.5 W
0.7 W
1.6 W
1.2 W
Address space per module
? with packing
4 bit
2 bit
2 bit
4 bit
? without packing
1 byte
1 byte
1 byte
1 byte
Digital inputs
Number of digital inputs
4
2
2
4
8
Number of NAMUR inputs
4
Parallel switching of inputs
No
Input characteristic curve in accordance with IEC 61131, type 1
Yes
Yes
Yes
Yes
Number of simultaneously controllable inputs
? Number of simultaneously controllable inputs
4
Input voltage
? Type of input voltage
AC/DC
AC
AC
DC
DC
? Rated value (DC)
24 V
? Rated value (AC)
120 V
230 V
? for signal "0"
-6 to +6 V DC/ 0 to 5 V AC
0V AC to 20V AC
0V AC to 40V AC
-5 to +30V
? for signal "1"
-15 V DC to -57.6 V DC; 15 V DC to 57.6 V DC; 15 V AC to 48 V AC
79 to 132 V AC
164V AC to 264V AC
-15 to -30 V
? Frequency range
47 ... 63 Hz
47 ... 63 Hz
47 ... 63 Hz
Input current
? for signal "1", typ.
10 mA; 4 to 10 mA
3 mA; 3 to 9 mA
5 mA; 5 to 15mA
6 mA; at 24 V
for 10 k switched contact
— for signal "0"
0.35 to 1.2 mA
— for signal "1"
2.1 to 7 mA
for unswitched contact
— for signal "0", max. (permissible quiescent current)
0.5 mA
— for signal "1"
typ. 8 mA
for NAMUR encoders
— for signal "0"
0.35 to 1.2 mA
— for signal "1"
2.1 to 7 mA
Input delay (for rated value of input voltage)
for standard inputs
— parameterizable
No
— at "0" to "1", min.
15 ms
15 ms
2 ms
— at "0" to "1", max.
15 ms
4.6 µs
4.5 ms
— at "1" to "0", min.
25 ms
45 ms
2 ms
— at "1" to "0", max.
15 ms
4.6 µs
4.5 ms
Encoder connection
? Fixed current limitation for wire-break monitoring, min.
18 k?; Rated voltage 24 V (15 V to 35 V); rated voltage 48 V (30 V to 60 V): 39 kohms
Cable length
? shielded, max.
1 000 m
1 000 m
1 000 m
200 m
1 000 m
? unshielded, max.
600 m
600 m
600 m
600 m
Encoder
Connectable encoders
? 2-wire sensor
No
No
Yes
— permissible quiescent current (2-wire sensor), max.
1 mA
2 mA
1.5 mA
Isochronous mode
Isochronous operation (application synchronized up to terminal)
Yes
No
No
Yes
Interrupts/diagnostics/status information
Diagnostic functions
Yes; Parameterizable
No
No
Yes; Diagnostic alarm
No
Alarms
? Diagnostic alarm
Yes; can be set
? Hardware interrupt
No
Diagnostic messages
? Diagnostic information readable
Yes
? Wire-break
Yes
? Short-circuit
No
No
Diagnostics indication LED
? Group error SF (red)
Yes
Yes
No
? Status indicator digital input (green)
Yes; per channel
Yes; per channel
Yes; per channel
Yes; per channel
Yes; per channel
Parameter
Remark
3 byte
3 byte
12 byte
3 byte
Potential separation
Potential separation digital inputs
? between the channels
No
No
No
No
No
? between the channels and backplane bus
Yes
Yes
Yes
Yes
Yes
? Between the channels and load voltage L+
Yes
Permissible potential difference
between different circuits
75 V DC/60 V AC
75 V DC/60 V AC
75 V DC/60 V AC
between M internally and the inputs
1500 V AC
1500 V AC
Isolation
Isolation tested with
2500 V DC
2500 V DC
4 000 V DC
500 V DC
500 V DC
Dimensions
Width
15 mm
15 mm
15 mm
15 mm
15 mm
Height
81 mm
81 mm
81 mm
81 mm
81 mm
Depth
52 mm
52 mm
52 mm
52 mm
52 mm
Weights
Weight, approx.
35 g
31 g
31 g
35 g
35 g
Article number
6ES7132-4BB01-0AB0
6ES7132-4BB01-0AA0
6ES7132-4BB31-0AB0
6ES7132-4BB31-0AA0
6ES7132-4BD00-0AB0
6ES7132-4BD02-0AA0
ET200S, EL-MOD., 2DO HF,DC24V, 0.5A, 5PC
ET200S, EL-MOD., 2DO ST,DC24V, 0.5A, 5PC
ET200S, EL-MOD., 2DO HF, DC 24V, 2A, 5PC
ET200S, EL-MOD., 2DO ST, DC 24V, 2A, 5PC
ET200S, EL-MOD., 4DO HF,DC24V, 0.5A,5PCS
ET200S, EL-MOD., 4DO ST,DC24V, 0.5A,5PCS
Supply voltage
Reverse voltage protection
Yes; when using the same load voltage as on the power module
Yes; when using the same load voltage as on the power module
Yes; when using the same load voltage as on the power module
Yes; when using the same load voltage as on the power module
Yes; when using the same load voltage as on the power module
Yes; when using the same load voltage as on the power module
Load voltage L+
? Rated value (DC)
24 V; From power module
24 V; From power module
24 V; From power module
24 V; From power module
24 V; From power module
24 V; From power module
? Reverse polarity protection
Yes; polarity reversal can lead to the digital outputs being connected through
Yes; polarity reversal can lead to the digital outputs being connected through
Yes; polarity reversal can lead to the digital outputs being connected through
Yes; polarity reversal can lead to the digital outputs being connected through
Yes; polarity reversal can lead to the digital outputs being connected through
Yes; polarity reversal can lead to the digital outputs being connected through
Input current
from load voltage L+ (without load), max.
5 mA; Per channel
5 mA; Per channel
5 mA; Per channel
5 mA; Per channel
5 mA; Per channel
10 mA; Per channel
from backplane bus 3.3 V DC, max.
10 mA
10 mA
10 mA
10 mA
10 mA
10 mA
Power loss
Power loss, typ.
0.4 W
0.4 W
1.4 W
1.4 W
0.8 W
0.8 W
Address area
Address space per module
? with packing
2 bit
2 bit
2 bit
2 bit
4 bit
4 bit
? without packing
1 byte
1 byte
1 byte
1 byte
1 byte
1 byte
Digital outputs
Number of digital outputs
2
2
2
2
4
4
Short-circuit protection
Yes
Yes
Yes
Yes
Yes
Yes
? Response threshold, typ.
1.5 A
0.7 to 1.8 A
4 A
2.8 to 7.2 A
0.7 to 1.5 A
1 to 1.5 A
Limitation of inductive shutdown voltage to
-55 to -60 V, typ. L+( )
-55 to -60 V, typ. L+( )
-55 to -60 V, typ. L+( )
-55 to -60 V, typ. L+( )
-55 to -60 V, L+( )
(L+) -55 to -60 V
Controlling a digital input
Yes
Yes
Yes
Yes
Yes
Yes
Switching capacity of the outputs
? on lamp load, max.
2.5 W
5 W
5 W
10 W
5 W
5 W
Load resistance range
? lower limit
48 ?
48 ?
12 ?
12 ?
48 ?
48 ?
? upper limit
3 400 ?
3 400 ?
3 400 ?
3 400 ?
3 400 ?
3 400 ?
Output voltage
? for signal "1", min.
L+ (-1 V)
L+ (-1 V)
L+ (-1 V)
L+ (-1 V)
L+ (-1 V)
L+ (-1 V)
Output current
? for signal "1" rated value
0.5 A
0.5 A
2 A
2 A
0.5 A
0.5 A
? for signal "1" permissible range, min.
7 mA
7 mA
7 mA
7 mA
7 mA
7 mA
? for signal "1" permissible range, max.
600 mA
600 mA
2.4 A
2.4 A
600 mA
600 mA
? for signal "0" residual current, max.
0.3 mA
0.3 mA
0.5 mA
0.5 mA
0.3 mA
0.3 mA
Output delay with resistive load
? "0" to "1", max.
100 µs
200 µs
100 µs
200 µs
100 µs
50 µs
? "1" to "0", max.
400 µs
1.3 ms
400 µs
1.3 ms
300 µs
120 µs
Parallel switching of two outputs
? for uprating
No
No
No
No
No
No
? for redundant control of a load
Yes; per module
Yes; per module
Yes; per module
Yes; per module
Yes; per module
Yes; per module
Switching frequency
? with resistive load, max.
100 Hz
100 Hz
100 Hz
100 Hz
100 Hz
800 Hz
? with inductive load, max.
2 Hz
2 Hz
2 Hz; 0,5 H
2 Hz; 0,5 H
2 Hz
2 Hz
? on lamp load, max.
10 Hz
10 Hz
10 Hz
10 Hz
10 Hz
10 Hz
Total current of the outputs
? Current per module, max.
1 A
1 A
4 A
4 A
2 A
2 A
Cable length
? shielded, max.
1 000 m
1 000 m
1 000 m
1 000 m
1 000 m
1 000 m
? unshielded, max.
600 m
600 m
600 m
600 m
600 m
600 m
Isochronous mode
Isochronous operation (application synchronized up to terminal)
Yes
No
Yes
No
Yes
Yes
Interrupts/diagnostics/status information
Diagnostic functions
Yes
No
Yes
No
Yes
No
Substitute values connectable
Yes; 0/1
Yes; 0/1
Diagnostic messages
? Diagnostic information readable
Yes
Yes
? Wire-break
Yes; channel by channel
Yes; channel by channel
? Short-circuit
Yes; channel by channel
Yes; channel by channel
Yes; Module-wise
Diagnostics indication LED
? Group error SF (red)
Yes
Yes
Yes
? Status indicator digital output (green)
Yes
Yes
Yes
Yes
Yes; Per channel
Yes
Parameter
Remark
3 byte
1 byte
3 byte
1 byte
3 byte
1 byte
Diagnostics wire break
Disable / enable
Disable / enable
Diagnostics short-circuit
Disable / enable
Disable / enable
Response to CPU/master STOP
Substitute a value/keep last value
Substitute a value/keep last value
Potential separation
Potential separation digital outputs
? between the channels
No
No
No
No
No
No
? between the channels and backplane bus
Yes
Yes
Yes
Yes
Yes
Yes
Isolation
Isolation tested with
500 V DC
500 V DC
500 V DC
500 V DC
500 V DC
500 V DC
Dimensions
Width
15 mm
15 mm
15 mm
15 mm
15 mm
15 mm
Height
81 mm
81 mm
81 mm
81 mm
81 mm
81 mm
Depth
52 mm
52 mm
52 mm
52 mm
52 mm
52 mm
Weights
Weight, approx.
40 g
40 g
40 g
40 g
40 g
40 g
Article number
6ES7132-4BF00-0AB0
6ES7132-4BF00-0AA0
ET200S, ELECTR.MODULE 8DO HF DC24V/0,5A
ET200S, ELEKTRONIKMODULE 8DO DC24V/0,5A
Supply voltage
Reverse voltage protection
Yes; when using the same load voltage as on the power module
Yes
Load voltage L+
? Rated value (DC)
24 V; From power module
24 V
? Reverse polarity protection
Yes; polarity reversal can lead to the digital outputs being connected through
Yes
Input current
from load voltage L+ (without load), max.
5 mA; Per channel
5 mA; Per channel
from backplane bus 3.3 V DC, max.
10 mA
10 mA
Power loss
Power loss, typ.
1.5 W
1.5 W
Address area
Address space per module
? without packing
1 byte
1 byte
Digital outputs
Number of digital outputs
8
8
Short-circuit protection
Yes
Yes
? Response threshold, typ.
0.7 to 1.9 A
1.5 A
Limitation of inductive shutdown voltage to
L+ -(47 to 60 V)
Typ. L+ (-55 to -60 V)
Controlling a digital input
Yes
Yes
Switching capacity of the outputs
? on lamp load, max.
5 W
5 W
Load resistance range
? lower limit
48 ?
48 ?
? upper limit
3 400 ?
3 400 ?
Output voltage
? for signal "1", min.
L+ (-1.0 V)
L+ (-1.0 V)
Output current
? for signal "1" rated value
0.5 A
0.5 A
? for signal "1" permissible range, min.
7 mA
7 mA
? for signal "1" permissible range, max.
600 mA
600 mA
? for signal "0" residual current, max.
0.3 mA
0.3 mA
Output delay with resistive load
? "0" to "1", max.
300 µs
300 µs
? "1" to "0", max.
600 µs
600 µs
Parallel switching of two outputs
? for uprating
No
No
? for redundant control of a load
Yes; per module
Yes
Switching frequency
? with resistive load, max.
100 Hz
100 Hz
? with inductive load, max.
2 Hz
2 Hz
? on lamp load, max.
10 Hz
10 Hz
Total current of the outputs
? Current per module, max.
4 A
4 A
Cable length
? shielded, max.
1 000 m
1 000 m
? unshielded, max.
600 m
600 m
Isochronous mode
Isochronous operation (application synchronized up to terminal)
Yes
Yes; jitter incumbered < 100us
Interrupts/diagnostics/status information
Diagnostic functions
Yes
No
Diagnostic messages
? Diagnostic information readable
Yes
? Short-circuit
Yes; Module-wise
Diagnostics indication LED
? Group error SF (red)
Yes
? Status indicator digital output (green)
Yes; Per channel
Yes
Parameter
Remark
1 byte
3-byte parameter (not accessible for the user)
Potential separation
Potential separation digital outputs
? between the channels
No
No
? between the channels and backplane bus
Yes
Yes
Isolation
Isolation tested with
500 V DC
500 V DC
Dimensions
Width
15 mm
15 mm
Height
81 mm
81 mm
Depth
52 mm
52 mm
Weights
Weight, approx.
40 g
40 g
Article number
6ES7132-4BD30-0AB0
6ES7132-4BD32-0AA0
6ES7132-4FB01-0AB0
6ES7132-4HB01-0AB0
6ES7132-4HB12-0AB0
ET200S, EL-MOD., 4DO HF, DC24V, 2A, 5PCS
ET200S, EL-MOD., 4DO ST, DC24V, 2A, 5PCS
ET200S, ELECT. MOD., 2DO, AC 230V, 5PCS
ET200S, EL-MOD., 2RO. DC24VAC230V,5A,5PC
ET200S, EL-MOD., 2RO,DC48V/AC230V,5A,5PC
Supply voltage
Reverse voltage protection
Yes; when using the same load voltage as on the power module
Yes; when using the same load voltage as on the power module
Yes; when using the same load voltage as on the power module
Load voltage L+
? Rated value (DC)
24 V; From power module
24 V; From power module
24 V; From power module
24 V; From power module
? Reverse polarity protection
Yes; polarity reversal can lead to the digital outputs being connected through
Yes
Yes
Yes
Load voltage L1
? permissible frequency range, lower limit
47 Hz
? permissible frequency range, upper limit
63 Hz
Input current
from load voltage L+ (without load), max.
5 mA; Per channel
10 mA; Per channel
30 mA
30 mA
from load voltage L1 (without load), max.
15 mA; Per channel
from backplane bus 3.3 V DC, max.
10 mA
10 mA
18 mA
10 mA
10 mA
Power loss
Power loss, typ.
1.6 W
1.6 W
0.6 W
0.6 W
Power loss, max.
4 W
Address area
Address space per module
? with packing
4 bit
4 bit
2 bit
2 bit
2 bit
? without packing
1 byte
1 byte
1 byte
1 byte
1 byte
Digital outputs
Number of digital outputs
4
4
2
2
2
Short-circuit protection
Yes
Yes
Yes
No
No
? Response threshold, typ.
5 to 10 A
2.8 to 7.2 A
Limitation of inductive shutdown voltage to
L+ -(37 to 41V)
Typ. L+ (-55 to -60 V)
-55 to -60 V
No
No
Controlling a digital input
Yes
Yes
Yes; possible
Yes
Yes
Switching capacity of the outputs
? on lamp load, max.
10 W
100 W
Load resistance range
? lower limit
12 ?
12 ?
? upper limit
3 400 ?
3 400 ?
Output voltage
? for signal "1", min.
L+ (-1.0 V)
L+ (-1.0 V)
L+ (-1.5 V)
Output current
? for signal "1" rated value
2 A
2 A
2 A
5 A
5 A
? for signal "1" permissible range, min.
7 mA
7 mA
0.1 mA
? for signal "1" permissible range, max.
2.4 A
2.4 A
2.2 A
? for signal "1" minimum load current
8 mA
8 mA
? for signal "0" residual current, max.
0.5 mA
0.1 mA
3 mA
Output delay with resistive load
? "0" to "1", max.
250 µs
50 µs; Typ. 45 µs
15 ms
? "1" to "0", max.
400 µs
120 µs; Typ. 90 µs
15 ms
Parallel switching of two outputs
? for uprating
No
No
No
? for redundant control of a load
Yes; per module
Yes; per module
Yes; per module
Switching frequency
? with resistive load, max.
100 Hz
1 000 Hz
10 Hz
2 Hz
2 Hz
? with inductive load, max.
2 Hz
2 Hz; At 0.5 H
0.5 Hz
0.5 Hz
0.5 Hz
? on lamp load, max.
10 Hz
10 Hz
1 Hz
2 Hz
2 Hz
Total current of the outputs
? Current per module, max.
4 A
4 A
2 A; Note derating data in the manual
Relay outputs
Switching capacity of contacts
— Thermal continuous current, max.
5 A
5 A
Cable length
? shielded, max.
1 000 m
1 000 m
1 000 m
1 000 m
1 000 m
? unshielded, max.
600 m
600 m
600 m
600 m
600 m
Isochronous mode
Isochronous operation (application synchronized up to terminal)
Yes
Yes
No
No
Interrupts/diagnostics/status information
Diagnostic functions
Yes
No
No
No
No
Substitute values connectable
Yes; 0/1
Yes; 0/1
Diagnostic messages
? Short-circuit
Yes; Module-wise
Diagnostics indication LED
? Group error SF (red)
Yes; SF-LED (red)
? Status indicator digital output (green)
Yes; Per channel
Yes
Yes
Yes
Yes
Parameter
Remark
1 byte
3 byte
Response to CPU/master STOP
Substitute a value/keep last value, 0/1
Substitute a value/keep last value
Substitute a value/keep last value
Potential separation
Potential separation digital outputs
? between the channels
No
No
No
Yes
Yes
? between the channels and backplane bus
Yes
Yes
Yes
Yes
Yes
? Between the channels and load voltage L+
Yes
Yes
Isolation
Isolation tested with
500 V DC
500 V DC
2500 V DC
tested with
? Channels against backplane bus and load voltage L+
1500 V AC
1500 V AC
? Load voltage L+ against backplane bus
500 V DC
500 V DC
Extended ambient conditions
? relative to ambient temperature-atmospheric pressure-installation altitude
Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Dimensions
Width
15 mm
15 mm
15 mm
15 mm
15 mm
Height
81 mm
81 mm
81 mm
81 mm
81 mm
Depth
52 mm
52 mm
52 mm
52 mm
52 mm
Weights
Weight, approx.
40 g
40 g
37 g
50 g
50 g
Article number
6ES7132-4BF50-0AA0
6ES7132-4BD50-0AA0
6ES7132-4HB50-0AB0
ET200S, 8DO SINK OUTPUT DC24V/0,5A
ET200S,4DO SINK OUTPUT DC24V/0,5A , 5PCS
ET200S,2RO,DC48V/AC230V,MANUAL ACTUATION
Supply voltage
Reverse voltage protection
Yes; when using the same correctly polarized load voltage as on the power module
Yes; when using the same load voltage as on the power module
Load voltage L+
? Rated value (DC)
24 V; From power module
24 V; From power module
24 V; From power module
? Reverse polarity protection
Yes
Yes
Yes
Input current
from load voltage L+ (without load), max.
5 mA
5 mA; Per channel
30 mA
from backplane bus 3.3 V DC, max.
10 mA
10 mA
10 mA
Power loss
Power loss, typ.
1.5 W
0.8 W
0.6 W
Address area
Address space per module
? with packing
4 bit
2 bit
? without packing
1 byte
1 byte
1 byte
Digital outputs
Number of digital outputs
8
4
2
Short-circuit protection
Yes
Yes
No
? Response threshold, typ.
1.5 A
Limitation of inductive shutdown voltage to
Typ. 47 V
No
Controlling a digital input
Yes
Yes
Yes
Switching capacity of the outputs
? on lamp load, max.
5 W
5 W
Load resistance range
? lower limit
48 ?
48 ?
? upper limit
3 400 ?
3 400 ?
Output voltage
? for signal "1", min.
Max. 1 V
1 V
Output current
? for signal "1" rated value
0.5 A
0.5 A
5 A
? for signal "1" permissible range, min.
5 mA
5 mA
? for signal "1" permissible range, max.
600 mA
600 mA
? for signal "1" minimum load current
8 mA
? for signal "0" residual current, max.
5 µA
5 µA
Output delay with resistive load
? "0" to "1", max.
300 µs
300 µs
? "1" to "0", max.
600 µs
600 µs
Parallel switching of two outputs
? for uprating
No
No
? for redundant control of a load
Yes; per module
Yes; per module
Switching frequency
? with resistive load, max.
100 Hz
100 Hz
2 Hz
? with inductive load, max.
0.5 Hz
0.5 Hz
0.5 Hz
? on lamp load, max.
10 Hz
10 Hz
2 Hz
Total current of the outputs
? Current per module, max.
4 A
2 A
Relay outputs
Switching capacity of contacts
— Thermal continuous current, max.
5 A
Cable length
? shielded, max.
1 000 m
1 000 m
1 000 m
? unshielded, max.
600 m
600 m
600 m
Isochronous mode
Isochronous operation (application synchronized up to terminal)
Yes
Yes
No
Interrupts/diagnostics/status information
Diagnostic functions
No
No
No
Substitute values connectable
Yes; 0/1
Diagnostics indication LED
? Status indicator digital output (green)
Yes
Yes
Yes
Parameter
Remark
3 byte
1 byte
Response to CPU/master STOP
Substitute a value/keep last value
Potential separation
Potential separation digital outputs
? between the channels
No
No
Yes
? between the channels and backplane bus
Yes
Yes
Yes
? Between the channels and load voltage L+
Yes
Isolation
Isolation tested with
500 V DC
500 V DC
tested with
? Channels against backplane bus and load voltage L+
1500 V AC
? Load voltage L+ against backplane bus
500 V DC
Extended ambient conditions
? relative to ambient temperature-atmospheric pressure-installation altitude
Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Dimensions
Width
15 mm
15 mm
15 mm
Height
81 mm
81 mm
81 mm
Depth
52 mm
52 mm
52 mm
Weights
Weight, approx.
40 g
40 g
50 g
skener.ru
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Àðìàòóðà DENDOR
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Äàò÷èêè è èçìåðèòåëè
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ðåãóëÿòîðû è ðåãèñòðàòîðû
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ïíåâìàòè÷åñêîå îáîðóäîâàíèå
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Êðàíû è Êëàïàíû
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Èçìåðèòåëüíûå ïðèáîðû
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Ñèñòåìû áåñïðîâîäíîãî óïðàâëåíèÿ «óìíûé äîì»
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Áåñêîíòàêòíûå âûêëþ÷àòåëè Êîíå÷íûå âûêëþ÷àòåëè Îïòè÷åñêèå äàò÷èêè Ýíêîäåðû
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Óñòàíîâêà óìÿã÷åíèÿ
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Óñòàíîâêà îáåçæåëåçèâàíèÿ
