SIMATIC WinCC flexible Runtime supports linking to:

1) WinCC flexible Runtime is passive (DP slave); the function block required for the link is included in the scope of delivery of WinCC flexible

2) For Microbox 427 and Panel PC 477/577/677 via internal MPI/DP interface

3) Only point-to-point to S7-200; no configuration download, operating systems: Windows XP; Article number: 6ES7901-3CB30-0AX0

4) Constraint with regard to baud rate for S7-200; see Catalog ST 70

5) WinCC flexible RT is active; communication with S7 functions

6) Only point-to-point to S7-300/-400; no configuration download, operating systems: Windows XP or higher; article number: 6GK1571-0BA00-0AA0 (USB)

7) For Microbox 427 and Panel PC 477/577/677/877 via internal Ethernet interface

8) For further information, see Catalog PM 10

9) "SINUMERIK HMI copy license OA" option required; for further information, see Catalog NC 60

10) OPC Client is included in scope of delivery, the "WinCC flexible/OPC Server for WinCC flexible Runtime" license is required for the OPC Server option

11) "WinCC flexible/Sm@rtAccess for WinCC flexible Runtime" license required

12) OPC and HTTP communication are additive, i.e. can be used in conjunction with the PLC links listed above

13) Via PC cable with integrated level converter RS 232/TTY; Article number: 6ES5734-1BD20

For information about SIMATIC Panels that support OPC/http communication, see the overview under "System interfaces".

Application note

In parallel with each and every PLC link, WinCC flexible Runtime supports the use of the OPC Client channel; this enables, for example, connection to an SNMP OPC Server for the purpose of visualizing the data stored there. The SNMP OPC Server provides a means of monitoring network components of any type (e.g. switches) which support the SNMP protocol. For further information, see Catalog IK PI.

Note:
For further information, see "Operator Control and Monitoring Devices/System interfaces"

SIMATIC WinCC flexible Runtime application example