1FU SIEMOSYN . Технические данные. Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на 1FU SIEMOSYN

| | | | | |

1FU SIEMOSYN

Machine type	Self-starting permanent magnet excited synchronous motor
Magnet material	Rare-earth/ferrite magnet material
Insulation of the stator winding in accordance with EN 60034-1 (IEC 60034-1)	Temperature class F for a winding temperature of up to 105 K at an ambient temperature of 40 °C
Operating voltage	Unrestricted operation on the mains or frequency converter according to rating plate
Standards and regulations	The motors comply with the appropriate standards and regulations, especially IEC 60034
Type of construction	In accordance with EN 60034-7 (IEC 60034-7), see types of construction
Terminal box arrangement (view onto DE)	Top
Terminal box connection type	Terminals in the terminal box for motor connection and PTC thermistor
Degree of protection in accordance with EN 60034-5 (IEC 60034-5)	IP54 for 2-pole motors IP55 for 4-pole and 6-pole motors
Permissible ambient temperature	-20 °C to +40 °C
Cooling	Self-cooling
Temperature monitoring	Motor protection through PTC thermistor with 3 built-in temperature sensors for shutdown
Paint finish	RAL 7030, stone gray
Shaft end on the drive end in accordance with DIN 748-3 (IEC 60072-1)	Shaft end on the drive end with featherkey and featherkey way (half-key balancing)
Radial eccentricity, concentricity, and axial eccentricity in accordance with DIN 42955 (IEC 60072-1)	Tolerance N (normal)
Vibration severity in accordance with EN 60034-14 (IEC 60034-14)	Grade N (normal)
Options	Vibration severity grade R or S Reduced radial eccentricity grade R Cast iron enclosure Location bearing DE or NDE Radial shaft sealing ring for gear attachment Metal fan Textile fan cover D-end bearings for increased cantilever forces Regreasing device Forced ventilation Terminal box located on left or right Modular built-on brake Gear attachment Connected modular frequency converter with or without gear

Structure of order number

………1 F U 8 0 8 3 – 4 T A 3 1 – Z
Position 1 2 3 4 5 6 7 - 8 9 10 11 12
Position: assignment
1st to 4th position	SIEMOSYN 1FU8 motor
5th and 6th position	Motor frame size, coded from 71M to 160L
7th position	Length
8th position (number)	Number of poles
9th position	Ventilation
	T = self-cooled
	W = non ventilated
10th position	Power range
	A = power range 7
	B = power range 5 C = special application D = power range 7 for frame sizes 132 and 160 E = power range 5 for frame sizes 132 and 160
11th position	Voltage characteristic number/winding design 1 = 80 V/50 Hz 2 = 100 V/50 Hz 3 = 125 V/50 Hz 6 = 200 V/50 Hz 8 = 400 V/50 Hz
12th position	Type of construction
Special versions:
- Z	Special versions only in conjunction with order code and plaintext where applicable

Order example

Three-phase motor IP55, speed range 600 to 4800 min^-1

M = constant = 5 Nm in the speed range

Type of construction IM B5

Special version:

PTC thermistor for warning and shutdown
Radial shaft sealing ring for gear installation

Order no. according to selection table	1FU8 083-4TA3? (A11, standard)
Type of construction IM B5	1
Special version	-Z
PTC thermistor for warning and shutdown	A12
Radial shaft sealing ring DE	K17
Specify when ordering	1FU8 083-4TA31-Z A12 + K17

1FU8 motors, 2-pole, 50 Hz/3000 min^-1

M = constant for 20 to 250 Hz/1200 to 15000 min^-1

M=constant for 20 Hz to f_max	Values at 50 Hz			Values at max. frequency
Rated load torque	Rated power	Rated current	Inrush current	Rated power	Rated current	Inrush current	Frame size		Order no.	Max. external moment of inertia	Weight for type of construction IM B5
M_N	P_N	I_N	I₁	P_N	I_N	I₁				J_ext
Nm	kW	A	A	kW	A	A				kgm²	approx. kg
max. frequency 50 Hz at U_N= 400 V/50 Hz, max. speed 3000 min^-1
1.3	0.41	2.0	7.3	-	-	-	80		1FU8 080 - 2TA8?	0.023	9
2.2	0.7	2.9	11.8	-	-	-	80		1FU8 083 - 2TA8?	0.035	11
2.9	0.9	3.8	17.5	-	-	-	80		1FU8 086 - 2TA8?	0.045	12
7.3	2.3	6.8	43	-	-	-	112		1FU8 113 - 2TA8?	0.3	29
max. frequency 100 Hz at U_N= 200 V/50 Hz, max. speed 6000 min^-1
1.3	0.41	4.1	14.6	0.82	4.2	21.7	80	1FU8 080 - 2TA6?		0.023	9
2.2	0.7	5.8	23.5	1.4	6.0	34.6	80	1FU8 083 - 2TA6?		0.035	11
2.9	0.9	7.2	33	1.8	7.5	48	80	1FU8 086 - 2TA6?		0.045	12
7.3	2.3	13.5	85	4.6	14.1	130	112	1FU8 113 - 2TA6?		0.25	29
max. frequency 160 Hz at U_N= 125 V/50 Hz, max. speed 9600 min^-1
1.3	0.41	5.5	18.8	1.31	5.8	33	80	1FU8 080 - 2TA3?		0.023	12
2.2	0.7	8.5	30.6	2.24	9.1	52.4	80	1FU8 083 - 2TA3?		0.035	14
2.9	0.9	13	58	2.92	13.5	100	80	1FU8 086 - 2TA3?		0.045	15
7.3	2.3	22	140	7.3	24.5	240	112	1FU8 113 - 2TA3?		0.2	35
max. frequency 200 Hz at U_N= 100 V/50 Hz, max. speed 12000 min^-1
1.3	0.41	7.9	29.2	1.63	9.0	55.3	80	1FU8 080 - 2TA2?		0.02	12
2.2	0.7	10.2	40.5	2.8	11.2	74	80	1FU8 083 - 2TA2?		0.03	14
2.7	0.85	14.2	66.3	3.5	15.2	121	80	1FU8 086 - 2TA2?		0.04	15
6.5	2,04	21	130	8.2	22	225	112	1FU8 113 - 2TA2?		0.2	35
max. frequency 250 Hz at U_N= 80 V/50 Hz, max. speed 15000 min^-1
1.3	0.41	9.0	33.6	2.04	11	66.6	80	1FU8 080 - 2TA1?		0.017	12
2.2	0.7	13	44	3.46	14	83.5	80	1FU8 083 - 2TA1?		0.025	14
2.4	0.75	14.5	83	3.8	16.7	140	80	1FU8 086 - 2TA1?		0.033	15

When ordering options, an encrypted order code must additionally be specified for each design desired (plaintext where applicable). Order codes must not be repeated in plaintext.

Order No.: 1FU8??? - ?T??? - Z

Order code(s) ??? +??? +???

1FU8 motors, 4-pole, 50 Hz/1500 min^-1

M = constant for 20 to 200 Hz/600 to 6000 min^-1

M = constant for 20 Hz to f_max		Values at 50 Hz			Values at max. frequency
Rated load torque		Rated power	Rated current	Inrush current	Rated power	Rated current	Inrush current	Frame size	Order no.	Max. external moment of inertia		Weight for type of construction IM B5
M_N		P_N	I_N	I₁	P_N	I_N	I₁			J_ext
Nm		kW	A	A	kW	A	A			kgm²		approx. kg
max. frequency 50 Hz at U_N= 400 V/50 Hz, max. speed 1500 min^-1
2	0.31		0.7	2.4	-	-	-	71	1FU8 073 - 4TA8?	0.006		6
2.6	0.41		0.9	3.2	-	-	-	71	1FU8 076 - 4TA8?	0.008		7
3.5	0.55		1.2	3.9	-	-	-	80	1FU8 080 - 4TA8?	0.007		9
5	0.79		1.7	5.7	-	-	-	80	1FU8 083 - 4TA8?	0.01		10
7	1.1		2.3	9.2	-	-	-	80	1FU8 086 - 4TA8?	0.013		12
8.5	1.33		3.1	14.3	-	-	-	90	1FU8 096 - 4TA8?	0.07		16
9.7	1.52		3.2	15.8	-	-	-	90	1FU8 098 - 4TA8?	0.08		18
18	2.83		6.7	33.7	-	-	-	112	1FU8 113 - 4TA8?	0.15		31
max. frequency 100 Hz at U_N= 200 V/50 Hz, max. speed 3000 min^-1
2	0.31		1.4	4.8	0.62	1.5	7.7	71	1FU8 073 - 4TA6?		0.012	6
2.6	0.41		1.7	6.3	0.82	1.8	9.9	71	1FU8 076 - 4TA6?		0.015	7
3.5	0.55		2.4	7.8	1.1	2.4	13	80	1FU8 080 - 4TA6?		0.015	9
5	0.79		3.4	11.4	1.57	3.3	19	80	1FU8 083 - 4TA6?		0.025	10
7	1.1		4.5	18.4	2.2	4.5	30.3	80	1FU8 086 - 4TA6?		0.03	12
8.5	1.33		6.1	28.5	2.67	6.2	42.9	90	1FU8 096 - 4TA6?		0.13	16
9.7	1.52		6.4	31.6	3.05	6.4	45.8	90	1FU8 098 - 4TA6?		0.15	18
18	2.83		13.1	66.8	5.65	13.4	95.2	112	1FU8 113 - 4TA6?		0.4	31
max. frequency 160 Hz at U_N= 125 V/50 Hz, max. speed 4800 min^-1
2	0.31		2.2	8.2	1.0	2.5	17	71	1FU8 073 - 4TA3?		0.012	6
2.6	0.41		2.7	10.0	1.31	2.9	19.7	71	1FU8 076 - 4TA3?		0.015	7
3.5	0.55		3.8	12.2	1.76	3.8	26.5	80	1FU8 080 - 4TA3?		0.015	9
5	0.79		5.3	19.3	2.51	5.3	42.3	80	1FU8 083 - 4TA3?		0.025	10
7	1.1		7.2	29.4	3.52	7.2	63.8	80	1FU8 086 - 4TA3?		0.03	12
8.5	1.33		9.7	50	4.27	10.0	93.3	90	1FU8 096 - 4TA3?		0.15	16
9.7	1.52		10.3	52.3	4.88	10.3	90.5	90	1FU8 098 - 4TA3?		0.18	18
18	2.83		22.4	117	9.05	23.5	211	112	1FU8 113 - 4TA3?		0.4	31
max. frequency 200 Hz at U_N= 100 V/50 Hz, max. speed 6000 min^-1
2	0.31		2.7	9.5	1.26	3.0	21.4	71	1FU8 073 - 4TA2?		0.012	6
2.6	0.41		3.5	12.7	1.63	3.7	27.7	71	1FU8 076 - 4TA2?		0.015	7
3.5	0.55		4.8	15.6	2.2	4.9	37.7	80	1FU8 080 - 4TA2?		0.015	9
5	0.79		6.7	25	3.14	6.7	61.5	80	1FU8 083 - 4TA2?		0.025	10
7	1.1		9.0	36.8	4.4	9.0	88.7	80	1FU8 086 - 4TA2?		0.03	12
8.5	1.33		12.1	57	5.34	12.9	113	90	1FU8 096 - 4TA2?		0.15	16
9.7	1.52		12.7	63.3	6.1	12.7	115	90	1FU8 098 - 4TA2?		0.18	18
18	2.83		26.2	134	11.3	27.3	251	112	1FU8 113 - 4TA2?		0.4	31

When ordering options, an encrypted order code must additionally be specified for each design desired (plaintext where applicable). Order codes must not be repeated in plaintext.

Order No.: 1FU8 ??? - ?T??? - Z

Order code(s) ??? +??? +???

1FU8 motors, 4-pole, 50 Hz/1500 min^-1

M = constant for 13.3 to 200 Hz/400 to 6000 min^-1

M = constant for 13.3 Hz to f_max	Values at 50 Hz						Values at max. frequency
Rated load torque	Rated power		Rated current		Inrush current		Rated power	Rated current	Inrush current	Frame size		Order no.	Max. external moment of inertia		Weight for type of construction IM B5
M_N	P_N		I_N		I₁		P_N	I_N	I₁				J_ext
Nm	kW		A		A		kW	A	A				kgm²		approx. kg
max. frequency 50 Hz at U_N= 400 V/50 Hz, max. speed 1500 min^-1
2.5	0.38	1.0		3.9		-		-	-	80	1FU8 080 - 4TA8?			0.005		9
5.2	0.82	1.7		9.2		-		-	-	80	1FU8 086 - 4TA8?			0.01		12
8	1.26	2.7		15.8		-		-	-	90	1FU8 098 - 4TA8?			0.06		18
16	2.51	6.0		33.7		-		-	-	112	1FU8 113 - 4TA8?			0.11		31
max. frequency 100 Hz at U_N= 200 V/50 Hz, max. speed 3000 min^-1
2.5	0.38	2.0		7.8		0.79		2.0	13	80	1FU8 080 - 4TA6?			0.011		9
5.2	0.82	3.4		18.4		1.63		3.4	30.3	80	1FU8 086 - 4TA6?			0.022		12
8	1.26	5.5		31.6		2.51		5.5	45.8	90	1FU8 098 - 4TA6?			0.11		18
16	2.51	12.0		66.8		5.03		12.3	95.2	112	1FU8 113 - 4TA6?			0.33		31
max. frequency 160 Hz at U_N= 125 V/50 Hz, max. speed 4800 min^-1
2.5	0.38	2.8		12.2		1.26		2.9	26.5	80	1FU8 080 - 4TA3?			0.011		9
5.2	0.82	5.3		29.4		2.61		5.3	63.8	80	1FU8 086 - 4TA3?			0.022		12
8	1.26	8.8		52.3		4.02		9.0	90.5	90	1FU8 098 - 4TA3?			0.13		18
16	2.51	20.7		117		8.04		21.8	211	112	1FU8 113 - 4TA3?			0.33		31
max. frequency 200 Hz at U_N= 100 V/50 Hz, max. speed 6000 min^-1
2.5	0.38	4.1		15.6		1.57		4.1	37.7	80	1FU8 080 - 4TA2?			0.011		9
5.2	0.82	6.7		36.8		3.27		6.8	88.7	80	1FU8 086 - 4TA2?			0.022		12
8	1.26	10.9		63.3		5.03		11.1	115	90	1FU8 098 - 4TA2?			0.13		18
16	2.51	23.9		134		10.1		25.1	251	112	1FU8 113 - 4TA2?			0.33		31

When ordering options, an encrypted order code must additionally be specified for each design desired (plaintext where applicable). Order codes must not be repeated in plaintext.

Order No.: 1FU8??? - ?T??? - Z

Order code(s) ??? +??? +???

1FU8 motors, 6-pole, 50 Hz/1000 min^-1

M = constant for 20 to 200 Hz/400 to 4000 min^-1

M = constant for 20 Hz to f_max	Values at 50 Hz			Values at max. frequency
Rated load torque	Rated power	Rated current	Inrush current	Rated power	Rated current	Inrush current	Frame size	Order no.	Max. external moment of inertia		Weight for type of construction IM B5
M_N	P_N	I_N	I₁	P_N	I_N	I₁			J_ext
Nm	kW	A	A	kW	A	A			kgm²		approx. kg
max. frequency 50 Hz at U_N= 400 V/50 Hz, max. speed 1000 min^-1
34	3.6	8.1	36	-	-	-	132	1FU8 134 - 6TD8?		1.3	58
59.6	6.24	13.5	73	-	-	-	160	1FU8 167 - 6TD8?		2	109
max. frequency 100 Hz at U_N= 200 V/50 Hz, max. speed 2000 min^-1
34	3.6	16.2	70	7.2	17.1	93	132	1FU8 134 - 6TD6?		1.3	58
59.6	6.24	26.8	146	12.48	28	188	160	1FU8 167 - 6TD6?		2	109
max. frequency 160 Hz at U_N= 125 V/50 Hz, max. speed 3200 min^-1
28.9	3	28	111	9.7	31.2	160	132	1FU8 134 - 6TD3?		1.3	58
54.6	5.7	52	231	18.3	58	333	160	1FU8 167 - 6TD3?		2	109
max. frequency 200 Hz at U_N= 100 V/50 Hz, max. speed 4000 min^-1
28.9	3	35.1	140	12.1	42	203	132	1FU8 134 - 6TD2?		1.3	58
54.6	5.7	65.5	290	22.9	78	437	160	1FU8 167 - 6TD2?		1.5	109

When ordering options, an encrypted order code must additionally be specified for each design desired (plaintext where applicable). Order codes must not be repeated in plaintext.

Order No.: 1FU8??? - ?T??? - Z

Order code(s) ??? +??? +???

Order no. supplement, 12th position of the order no., type of construction

12th Order no. position, type of construction in accordance with DIN EN 60034-7 Size 71M to 160L		Code 12th position	Order code
IM B3		0	-
IM B6/IM 1051, IM B7/IM 1061, IM B8/IM 1071		0	-
IM V5/IM 1011 without protective cover		0 9	- M1D
IM V6/IM 1031		0 9	- M1E
IM V5/IM 1011 with protective cover		9 ¹⁾	M1F
Flange
IM B5/IM 3001		1	-
IM V5/IM 3011 without protective cover		1 8	-
IM V1/IM 3011 with protective cover		4 ¹⁾	-
IM V3/IM 3031		1 9	- M1G
IM B35/IM 2001		6	-
Standard flange
IM B14/IM 3601, IM V19/IM 3631, IM V18/IM 3611 without protective cover	2				-
IM V18/IM 3611 with protective cover	9 ¹⁾				M2A
IM B34/IM 2101	7				-
Special flange
IM B14/IM 3601, IM V19/IM 3631, IM V18/IM 3611 without protective cover		3		-
IM V18/IM 3611 with protective cover		9 ¹⁾		M2B
IM B34/IM 2101		9		M2C

The flanges are assigned to the frame sizes in DIN EN 50347 as FF with through-holes.
A flanges in accordance with DIN 42948 continue to be valid.

The standard flanges are assigned to the frame sizes in DIN EN 50347 as FT with threaded holes.
C flanges in accordance with DIN 42948 continue to be valid.

The special flange was assigned as a large flange in the previous DIN 42677.

The dimensions of the following types of construction are identical:
IM B3, IM B6, IM B7, IM B8, IM V5 and IM V6
IM B5, IM V1 and IM V3
IM B14, IM V18 and IM V19

The motors in the standard power range are available in the standard types of construction IM B3, IM B5 or IM B14, and can be operated in mounting positions IM B6, IM B7, IM B8, IM V5, IM V6, IM V1, IM V3 (up to frame size 160L) or IM V18 and IM V19. Eyebolts are available for transport and installation in a horizontal position. In conjunction with the eyebolts, for the purpose of stabilizing the position when the motor is arranged vertically, additional lifting straps (DIN EN 1492-1) and/or clamping bands (DIN EN 12195-2) must be used. If mounting position IM V1 is ordered, eyebolts are supplied for vertical mounting.

For this reason, they are normally designated only with the basic type of construction on the rating plate.

In the case of all types of construction with shaft end down, the version "with protective cover" is recommended.

1) Second shaft end K16 not possible.

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания