Overview

The optional board SBP (Sensor Board Pulse) allows a second pulse encoder to be connected to the converter.

Suitable pulse encoders

All commercially available pulse encoders can be connected to this optional board. Their pulses can be processed as either bipolar or unipolar TTL or HTL level signals.

Encoder signals up to a pulse frequency of 410 kHz are possible

(4096 pulses per rev. at

6000 rpm). Encoder monitoring can also be implemented through evaluation of the check track.

The supply voltage for the connected encoder can be set to

5 V or 15 V.

Temperature sensor

The temperature sensor connection on the board is not evaluated in the SIMOREG system.

Connections

Signal cables are connected to terminal strips X400 and X401.

Connectable cross-section:

2.5 mm² (AWG12)

Maximum connectable encoder cable length with shielding

as specified ¹⁾:

• 100 m (TTL signals)
• 150 m with Tracks A and B (HTL signals)
• 300 m with Track A+/A– and B+/B– (HTL signals).