FM 352-5 high-speed Boolean processor . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на FM 352-5 high-speed Boolean processor

| | | | | | |

FM 352-5 high-speed Boolean processor

Article number	6ES7352-5AH01-0AE0	6ES7352-5AH11-0AE0
	FM 352-5, BOOLEAN PROCESSOR 12DE/8DA	FM 352-5 PNP, BOOLEAN PROCESSOR 12DI/8DO
Supply voltage
Rated value (DC)
? 24 V DC	Yes	Yes
Load voltage L+
? Rated value (DC)	24 V	24 V
? Reverse polarity protection	Yes	Yes
Input current
from load voltage1L+, max.	150 mA; typ. 60 mA	150 mA; typ. 60 mA
from load voltage 2L+ (without load), max.	200 mA; typ. 60 mA, DI/DO supply	200 mA; typ. 60 mA, DI/DO supply
from load voltage 3L+ (with encoder), max.	600 mA; typ. 80 mA plus encoder supply	600 mA; typ. 80 mA plus encoder supply
from load voltage 3L+ (without encoder), max.	200 mA; typ. 80 mA	200 mA; typ. 80 mA
from backplane bus 5 V DC, typ.	135 mA	135 mA
Encoder supply
5 V encoder supply
? 5 V	Yes	Yes
? short-circuit protection	Yes; Electronic overload protection; no protection on applying a normal or counter voltage.	Yes; Electronic overload protection; no protection on applying a normal or counter voltage.
? Output current, max.	250 mA	250 mA
24 V encoder supply
? 24 V	Yes	Yes
? Short-circuit protection	Yes; Overvoltage and overheating protection if overloaded; diagnostics if output reaches temperature limit; no protection on applying a normal or counter voltage	Yes; Overvoltage and overheating protection if overloaded; diagnostics if output reaches temperature limit; no protection on applying a normal or counter voltage
? Output current, max.	400 mA	400 mA
Power loss
Power loss, typ.	6.5 W	6.5 W
Memory
Type of memory	RAM	RAM
Memory size	128 kbyte; required for operation, MMC	128 kbyte; required for operation, MMC
Digital inputs
Number of digital inputs	8; Standard and up to 12 with 24 V DC encoder inputs as digital inputs	8; Standard and up to 12 with 24 V DC encoder inputs as digital inputs
Input voltage
? Rated value (DC)	24 V	24 V
? for signal "0"	-30 to +5V	-30 to +5V
? for signal "1"	+11 to +30V	+11 to +30V
Input current
? for signal "0", max. (permissible quiescent current)	1.5 mA	1.5 mA
? for signal "1", typ.	3.8 mA	3.8 mA
Input delay (for rated value of input voltage)
? Input frequency (with a time delay of 0.1 ms), max.	200 kHz	200 kHz
? programmable digital filter delay	None, 5 µs, 10 µs, 15 µs, 20 µs, 50 µs, 1.6 ms	None, 5 µs, 10 µs, 15 µs, 20 µs, 50 µs, 1.6 ms
? Minimum pulse width for program reactions	1 µs, 5 µs, 10 µs, 15 µs, 20 µs, 50 µs, 1,6 ms	1 µs, 5 µs, 10 µs, 15 µs, 20 µs, 50 µs, 1,6 ms
for standard inputs
— at "0" to "1", max.	3 µs; typ. 1.5 µs	3 µs; typ. 1.5 µs
Cable length
? shielded, max.	600 m	600 m
? unshielded, max.	100 m; Shielded cable recommended if filtering delay is set to less than 1.6 ms	100 m; Shielded cable recommended if filtering delay is set to less than 1.6 ms
Digital outputs
Number of digital outputs	8	8
Current-sinking	Yes	No
Current-sourcing	No	Yes
Short-circuit protection	Yes; Overvoltage protection, thermal protection	Yes; Overvoltage protection, thermal protection
? Response threshold, typ.	1.7 to 3.5 A	1.7 to 3.5 A
Limitation of inductive shutdown voltage to	2M -45 V typ., (-40 V to -55 V); comment: no protection against inductive kickback >55 mJ	2M -45 V typ., (-40 V to -55 V); comment: no protection against inductive kickback >55 mJ
Controlling a digital input	No	Yes
Switching capacity of the outputs
? on lamp load, max.	5 W	5 W
Output voltage
? Rated value (DC)	24 V	24 V
? for signal "0", max.	28.8 V	28.8 V
? for signal "1", max.	0.5 V	0.5 V
Output current
? for signal "1" rated value	0.5 A; At 60 °C	0.5 A; At 60 °C
? for signal "1" permissible range for 0 to 60 °C, min.	5 mA	5 mA
? for signal "1" permissible range for 0 to 60 °C, max.	600 mA	600 mA
? for signal "0" residual current, max.	1 mA	1 mA
Output delay with resistive load
? "0" to "1", max.	1 µs; 0.6 µs 50 mA / 1.0 µs 0.5 A	1 µs; 0.6 µs 50 mA / 1.0 µs 0.5 A
? "1" to "0", max.	1.5 µs; 1.7 µs 50 mA / 1.5 µs 0.5 A	1.5 µs; 1.7 µs 50 mA / 1.5 µs 0.5 A
Parallel switching of two outputs
? for uprating	Yes; 2	Yes; 2
Switching frequency
? with resistive load, max.	100 kHz; 20 kHz at 0.5 A; 100 kHz at 0.25 A	100 kHz; 20 kHz at 0.5 A; 100 kHz at 0.25 A
? with inductive load, max.	2 Hz; 2 Hz at 0.5 A with external commutator diodes; 0.5 Hz at 0.5 A without external commutator diodes	2 Hz; 2 Hz at 0.5 A with external commutator diodes; 0.5 Hz at 0.5 A without external commutator diodes
? on lamp load, max.	10 Hz	10 Hz
Cable length
? shielded, max.	600 m	600 m
? unshielded, max.	100 m	100 m
Encoder
Connectable encoders
? Incremental encoder (symmetrical)	Yes	Yes
? Incremental encoder (asymmetrical)	Yes	Yes
? Absolute encoder (SSI)	Yes	Yes
? 2-wire sensor	Yes	Yes
— permissible quiescent current (2-wire sensor), max.	1.5 mA	1.5 mA
Encoder signals, incremental encoder (symmetrical)
? Trace mark signals	A, notA, B, notB	A, notA, B, notB
? Zero mark signal	N, notN	N, notN
? Input signal	5 V difference signal (phys. RS 422)	5 V difference signal (phys. RS 422)
? Input frequency, max.	500 kHz	500 kHz
? Cable length, shielded, max.	100 m; 100 m with 24 V supply and 500 kHz; 32 m with 5 V supply and 500 kHz	100 m; 100 m with 24 V supply and 500 kHz; 32 m with 5 V supply and 500 kHz
Encoder signals, incremental encoder (asymmetrical)
? Trace mark signals	A, B	A, B
? Zero mark signal	N	N
? Input voltage	24 V	24 V
? Input frequency, max.	200 kHz	200 kHz
? Cable length, shielded, max.	50 m; Cable length, HTL incremental encoder, Siemens, type 6FX2001-4: 50 kHz, 25 m shielded, max., 25 kHz, 50 m shielded, max.	50 m; Cable length, HTL incremental encoder, Siemens, type 6FX2001-4: 50 kHz, 25 m shielded, max., 25 kHz, 50 m shielded, max.
Encoder signals, absolute encoder (SSI)
? Data signal	DATA, notDATA	DATA, notDATA
? Clock signal	CK, notCK	CK, notCK
? Telegram length, parameterizable	13 or 25 bit	13 or 25 bit
? Clock frequency, max.	1 MHz; 125 kHz, 250 kHz, 500 kHz or 1 MHz	1 MHz; 125 kHz, 250 kHz, 500 kHz or 1 MHz
? Cable length, shielded, max.	320 m; At 125 kHz	320 m; At 125 kHz
? Monoflop time	settable: 16/32/48/64 µs	settable: 16/32/48/64 µs
? Listening mode	Yes; one or two stations	Yes; one or two stations
? Multiturn	Yes; 25 bit message frame	Yes; 25 bit message frame
Encoder signal evaluation
? Counting direction, forward	Yes	Yes
? Counting direction, backward	Yes	Yes
Response times
Input- to output response time	5 V input to 24 V output, 0 filter: 1 to 4 µs (typ.); 24 V input to 24 V output, 0 filter: 2 to 6 µs (typ.)	5 V input to 24 V output, 0 filter: 1 to 4 µs (typ.); 24 V input to 24 V output, 0 filter: 2 to 6 µs (typ.)
Interfaces
Point-to-point
? Updating times	PLC interface: 1.7 ms	PLC interface: 1.7 ms
Interrupts/diagnostics/status information
Alarms
? Diagnostic alarm	Yes; 1L, 2L, 3L missing; MMC error; output overload (8); encoder supply overload; differential wire break; parameterization errror; SSI message frame overflow	Yes; 1L, 2L, 3L missing; MMC error; output overload (8); encoder supply overload; differential wire break; parameterization errror; SSI message frame overflow
? Hardware interrupt	Yes; 8 available; for generation by user program	Yes; 8 available; for generation by user program
Diagnostic messages
? Wire-break in signal transmitter cable	Yes	Yes
? Overflow/underflow	Yes	Yes
? missing load voltage	Yes	Yes
Counter
Counting range, description	Counting range (16-bit counters): -32,768 to 32,767 (user-specific within this range); counting range (32-bit counters): -2,147,483,648 to 2,147,483,647 (user-specific within this range)	Counting range (16-bit counters): -32,768 to 32,767 (user-specific within this range); counting range (32-bit counters): -2,147,483,648 to 2,147,483,647 (user-specific within this range)
Counting range, lower limit	-2 147 483 648	-2 147 483 648
Counting range, upper limit	2 147 483 647	2 147 483 647
Counting mode
? Counting mode, individual	Yes	Yes
? Counting mode, continuous	Yes	Yes
? Counting mode, periodic	Yes	Yes
Potential separation
between 1L and 2L and 3L	Yes	Yes
Potential separation digital inputs
? Potential separation digital inputs	Yes; Yes CPU, I/O and sensor units are isolated	Yes; Yes CPU, I/O and sensor units are isolated
Configuration
Programming
? Program cycle time (scan)	1 µs	1 µs
Connection method
required front connector	1x 40-pin	1x 40-pin
Dimensions
Width	80 mm	80 mm
Height	125 mm	125 mm
Depth	120 mm	120 mm
Weights
Weight, approx.	434 g; Module weight: approx. 434 g (with 1L connection and without I/O connection or MMC); shipping weight: approx. 500 g (with bus and 1L connection and without I/O connection or MMC)	434 g; Module weight: approx. 434 g (with 1L connection and without I/O connection or MMC); shipping weight: approx. 500 g (with bus and 1L connection and without I/O connection or MMC)

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания