AS-Interface communication module for printed circuit board installation

3RK1400?0CD00?0AA3 AS-Interface communication module

AS-Interface communication module 3RK1400-1CD00-0AA2

3RK1400?0CD00?0AA3 AS-Interface communication module for printed circuit board installation

Circuit diagram 3RK11400-0CD00-0AA3

With the 4I/4O module 3RK1400-0CD00-0AA3 for printed circuit board mounting, it is possible for up to four mechanical contacts to be queried or indicator lights to be operated, the necessary energy being provided by the AS-Interface system (yellow AS-Interface cable).

Note:

If the switching outputs are overloaded, the module does not respond to invoking by a master.

3RK1400?0CD01?0AA3 AS-Interface communication module for printed circuit board installation

3RK1400-0CD01-0AA3 circuit diagram

With the 4I/4O module 3RK1400?0CD01?0AA3 for printed circuit board mounting, it is possible for up to four mechanical contacts to be queried or indicator lights to be operated, the necessary energy for the inputs and outputs being provided from the auxiliary voltage (24 V PELV). If (+) is connected to U_aux+ and (NC) to U_aux–, the outputs are not short-circuit and overload proof; if U_aux– is connected to (0), the outputs are overload and short-circuit proof (maximum summation current 200 mA). In this case, the module does not respond even to invoking by a master when the switching outputs are overloaded.

3RK1400?1CD00?0AA2, 3RK2400?1FD00?0AA2 AS-Interface communication module for printed circuit board installation

With the 3RK1400?1CD00?0AA2 4I/4O or 3RK2400?1FD00?0AA2 4I/3O modules for printed circuit board mounting, it is possible for up to four mechanical contacts or 3-conductor sensors according to IEC 947?5?2 to be connected.

Up to four indicator lights via the 4I/4O module or up to three indicator lights via the 4I/3O module can also be controlled. The power for short-circuit proof solid-state switching outputs is provided from an auxiliary voltage (24 V PELV).

Mounting is very easy using a "Card Edge Board-to-Board Connector". This connector can be ordered for vertical and horizontal mounting from the company AMP, for example:

• 180° version for vertical mounting (AMP): Type 530843-2
• 90° version for horizontal mounting (AMP): Type 650118-1

If the inputs are loaded with more than 200 mA, the module does not respond to invoking by a master.

3RK1200?0CD00?0AA2 AS-Interface communication module for printed circuit board installation

With the 4I module for printed circuit board installation, it is possible for up to four mechanical contacts or 3-conductor sensors to be connected, the power for inputs being provided from the AS?Interface cable.

Mounting is very easy using a "Card Edge Board-to-Board Connector". This connector can be ordered for vertical and horizontal mounting from the company AMP, for example:

• 180° version for vertical mounting (AMP): Type 530843?2
• 90° version for horizontal mounting (AMP): Type 650118?1

If the inputs are loaded with more than 200 mA, the module does not respond to invoking by a master.