FM 355 controller module . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на FM 355 controller module

| | | | | | |

FM 355 controller module

Article number	6ES7355-0VH10-0AE0	6ES7355-1VH10-0AE0
	SIMATIC S7-300, CONROL MODULE	SIMATIC S7-300, CONTROL MODULE
Supply voltage
Load voltage L+
? Rated value (DC)	24 V	24 V
Input current
from load voltage L+ (without load), max.	310 mA; Typ. 260 mA	270 mA; typ. 220 mA
from backplane bus 5 V DC, max.	75 mA; typ. 50 mA	75 mA; typ. 50 mA
Power loss
Power loss, typ.	6.5 W	5.5 W
Power loss, max.	7.8 W	6.9 W
Digital inputs
Number of digital inputs	8	8
Input characteristic curve in accordance with IEC 61131, type 2	Yes	Yes
Input voltage
? Rated value (DC)	24 V	24 V
? for signal "0"	-3 to +5V	-3 to +5V
? for signal "1"	13 to 30V	13 to 30V
Input current
? for signal "1", typ.	7 mA	7 mA
Cable length
? shielded, max.	1 000 m	1 000 m
? unshielded, max.	600 m	600 m
Digital outputs
Number of digital outputs		8
Short-circuit protection		Yes; Electronic
Limitation of inductive shutdown voltage to		L+ (-1.5 V)
Controlling a digital input		Yes
Switching capacity of the outputs
? on lamp load, max.		5 W
Load resistance range
? lower limit		240 ?
? upper limit		4 k?
Output voltage
? for signal "1", min.		L+ (-2.5 V)
Output current
? for signal "1" rated value		100 mA
? for signal "1" permissible range for 0 to 60 °C, min.		5 mA
? for signal "1" permissible range for 0 to 60 °C, max.		150 mA
? for signal "0" residual current, max.		0.5 mA
Parallel switching of two outputs
? for logic links		Yes
Switching frequency
? with resistive load, max.		100 Hz
? with inductive load, max.		0.5 Hz
? on lamp load, max.		100 Hz
Total current of the outputs (per group)
all mounting positions
— up to 60 °C, max.		400 mA
Cable length
? shielded, max.		1 000 m
? unshielded, max.		600 m
Analog inputs
Number of analog inputs	4	4
permissible input voltage for voltage input (destruction limit), max.	30 V	30 V
permissible input current for current input (destruction limit), max.	40 mA	40 mA
Input ranges (rated values), voltages
? 0 to +10 V	Yes	Yes
? -1.75 V to +11.75 V	Yes	Yes
? -80 mV to +80 mV	Yes	Yes
Input ranges (rated values), currents
? 0 to 20 mA	Yes	Yes
? 0 to 23.5 mA	Yes	Yes
? -3.5 mA to +23.5 mA	Yes	Yes
? 4 mA to 20 mA	Yes	Yes
Input ranges (rated values), thermocouples
? Type B	Yes	Yes
? Type J	Yes	Yes
? Type K	Yes	Yes
? Type R	Yes	Yes
? Type S	Yes	Yes
Input ranges (rated values), resistance thermometer
? Pt 100	Yes	Yes
Thermocouple (TC)
Temperature compensation
— internal temperature compensation	Yes	Yes
— external temperature compensation with Pt100	Yes	Yes
Characteristic linearization
? parameterizable	Yes	Yes
— for thermocouples	Type B, J, K, R, S	Type B, J, K, R, S
— for resistance thermometer	Pt100 (standard)	Pt100 (standard)
Cable length
? shielded, max.	200 m; 50 m at 80 mV and thermocouples	200 m; 50 m at 80 mV and thermocouples
Analog outputs
Number of analog outputs	4
Voltage output, short-circuit protection	Yes
Voltage output, short-circuit current, max.	25 mA
Current output, no-load voltage, max.	18 V
Output ranges, voltage
? 0 to 10 V	Yes
? -10 V to +10 V	Yes
Output ranges, current
? 0 to 20 mA	Yes
? 4 mA to 20 mA	Yes
Connection of actuators
? for voltage output two-wire connection	Yes
? for current output two-wire connection	Yes
Load impedance (in rated range of output)
? with voltage outputs, min.	1 k?
? with voltage outputs, capacitive load, max.	1 µF
? with current outputs, max.	500 ?
? with current outputs, inductive load, max.	1 mH
Cable length
? shielded, max.	200 m; 50 m at 80 mV and thermocouples
Analog value generation for the inputs
Measurement principle	integrating	integrating
Integration and conversion time/resolution per channel
? Resolution with overrange (bit including sign), max.	14 bit; 12 bit or 14 bit, parameterizable	14 bit; 12 bit or 14 bit, parameterizable
? Conversion time (per channel)	16.67 ms; for 12 bit: 16 2/3 ms for 60 Hz, 20 ms for 50 Hz; for 14 bit: 100 ms for 50 Hz and 60 Hz	16.67 ms; for 12 bit: 16 2/3 ms for 60 Hz, 20 ms for 50 Hz; for 14 bit: 100 ms for 50 Hz and 60 Hz
Analog value generation for the outputs
Settling time
? for resistive load	0.1 ms
? for capacitive load	3.3 ms
? for inductive load	0.5 ms
Encoder
Connection of signal encoders
? for voltage measurement	Yes	Yes
? for current measurement as 4-wire transducer	Yes	Yes
Connectable encoders
? 2-wire sensor	Yes	Yes
— permissible quiescent current (2-wire sensor), max.	1.5 mA	1.5 mA
Errors/accuracies
Linearity error (relative to input range), (+/-)	0.05 %	0.05 %
Temperature error (relative to input range), (+/-)	0.005 %/K	0.005 %/K
Linearity error (relative to output range), (+/-)	0.05 %
Temperature error (relative to output range), (+/-)	0.02 %/K
Operational error limit in overall temperature range
? Voltage, relative to input range, (+/-)	0.6 %; +/-0.6 to +/-1%	0.6 %; +/-0.6 to +/-1%
? Current, relative to input range, (+/-)	0.6 %; +/-0.6 to +/-1%	0.6 %; +/-0.6 to +/-1%
? Resistance thermometer, relative to input range, (+/-)	0.6 %; +/-0.6 to +/-1%	0.6 %; +/-0.6 to +/-1%
? Voltage, relative to output range, (+/-)	0.5 %
? Current, relative to output range, (+/-)	0.6 %
Basic error limit (operational limit at 25 °C)
? Voltage, relative to input range, (+/-)	0.4 %; 80 mV: +/-0.6%; 250 to 1000 mV: +/-0.4%; 2.5 to 10 V: +/-0.6%; 3.2 to 20 mA: +/-0.5%	0.4 %; 80 mV: +/-0.6%; 250 to 1000 mV: +/-0.4%; 2.5 to 10 V: +/-0.6%; 3.2 to 20 mA: +/-0.5%
? Current, relative to input range, (+/-)	0.4 %; +/-0.4 to +/-0.6 %	0.4 %; +/-0.4 to +/-0.6 %
? Resistance thermometer, relative to input range, (+/-)	0.4 %; +/-0.4 to +/-0.6 %	0.4 %; +/-0.4 to +/-0.6 %
? Voltage, relative to output range, (+/-)	0.3 %
? Current, relative to output range, (+/-)	0.5 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
? Series mode interference (peak value of interference < rated value of input range), min.	40 dB	40 dB
? Common mode interference (USS < 2.5 V) , min.	70 dB	70 dB
Interrupts/diagnostics/status information
Substitute values connectable	Yes; Parameterizable	Yes; Parameterizable
Integrated Functions
Control technology
? Number of closed-loop controllers	4	4
Potential separation
Potential separation controller
? between the channels	No	No
? between the channels and backplane bus	Yes; Optocoupler	Yes; Optocoupler
Permissible potential difference
Between the inputs and MANA (UCM)	2.5 V DC	2.5 V DC
Isolation
Isolation tested with	500 V DC	500 V DC
Connection method
required front connector	2x 20-pin	2x 20-pin
Dimensions
Width	80 mm	80 mm
Height	125 mm	125 mm
Depth	120 mm	120 mm
Weights
Weight, approx.	470 g	470 g

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания