6SL3162-2BM00-0AA0

Цена на сайте указана розничная в ЕВРО без учета НДС.
Для уточнения цены и размера предоставляемой скидки - звоните или присылайте заявки

DC link rectifier adapter

DC link rectifier adapter for unit widths of 50 mm ... 100 mm (1.97 in ... 3.94 in)

DC link rectifier adapter for unit widths of 150 mm ... 300 mm (5.91 in ... 11.8 in)

If the internal DC link busbars of the Motor Modules are not used, the DC link voltage must be supplied externally through a DC link rectifier adapter, e.g. when devices of booksize format are coupled with devices of chassis format over an external DC busbar. The DC link rectifier adapter is mounted on the DC link busbars of the Motor Module. The DC link cables are routed from above.

DC link adapter

DC link adapter (multi-tier) for all unit widths

If a multi-tier Motor Module configuration is used, a DC link adapter can be provided for linking the DC links of two drive line-ups. The DC link adapter is mounted sideways on the DC link busbars of the Motor Module. It can be mounted on the right or left side of the Motor Module. The identification of the poles (DCN and DCP) on the DC link adapter changes in accordance with the mounting position. The DC link cables are routed from behind. The DC link adapter (multi-tier) cannot be used in combination with the reinforced DC link rails for the Motor Modules ? 100 mm (3.94 in) in width. DC link adapters are supplied in sets of 2 units.