6SL3054-0EF00-1BA0

Цена на сайте указана розничная в ЕВРО без учета НДС.
Для уточнения цены и размера предоставляемой скидки - звоните или присылайте заявки

CU310?2 PN and CU310?2 DP Control Units

The CU310?2 Control Unit that is designed for the communication and open-loop/closed-loop control functions of a SINAMICS S120 (AC/AC) is combined with the PM340 Power Module to create a powerful single-axis drive. PROFINET (PN) and PROFIBUS (DP) variants are available for fieldbus communication.

CompactFlash Card for CU310-2 Control Units

The CompactFlash card contains the firmware and parameter settings. The CompactFlash card is plugged into the appropriate slot on the CU310?2 Control Unit.

A CU310-2 Control Unit can perform the communication, open-loop and closed-loop control functions for one Power Module. The performance expansion is not required in this case.

In addition to the firmware, the CompactFlash card also contains licensing codes which are required to enable firmware options.

Currently, the following firmware options can be ordered in addition to the article number:

• Safety Integrated Extended Functions, order code F01
• High output frequency ¹⁾, order code J01
• DCB Extension, order code U01

The firmware option can also be enabled on-site, for example, if the Safety Integrated Extended functions should be enabled later. You will need the serial number of the CompactFlash card and the Article No. of the firmware option to be enabled. With this information, you can purchase the associated license code from a license database and enable the firmware option. The license code is only valid for the CompactFlash card declared and cannot be transferred to other CompactFlash cards.

¹⁾ For more information, visit http://support.automation.siemens.com/WW/view/en/104020669