6SL3054-0EE01-1BA0

Цена на сайте указана розничная в ЕВРО без учета НДС.
Для уточнения цены и размера предоставляемой скидки - звоните или присылайте заявки

The communication, open-loop and closed-loop control functions for one or more Motor Modules and the Line Module are executed in a CU320?2 Control Unit. The CU320?2 Control Unit is essentially designed for multi-axis operation.

CU320?2 DP Control Unit with BOP20 Basic Operator Panel

CompactFlash card for CU320?2 Control Units

The CompactFlash card contains the firmware and parameter settings. The CompactFlash card is plugged into the appropriate slot on the CU320?2 Control Unit.

A CU320?2 Control Unit can perform the communication, open-loop and closed-loop control functions for several Motor Modules. The computing capacity required increases in proportion to the number of connected Motor Modules and system components and in relation to the dynamic response required. For the CU320?2 Control Unit, the performance expansion is necessary from the 4th axis. The utilization of the CU320?2 Control Unit can be calculated with the SIZER engineering tool.

In addition to the firmware, the CompactFlash Card also contains licensing codes which are required to enable firmware options.

In addition to the Article No., the following firmware options can currently be ordered with or without performance expansion:

• Safety Integrated Extended Functions, order codes per axis F01 to F06(see chapter Safety Integrated)
• High output frequency ¹⁾, order code J01
• DCB Extension, order code U01

The firmware options can also be enabled on-site, for example, if the performance expansions required are not known at the time of placing the order or the Safety Integrated Extended Functions are to be enabled retrospectively. You will need the serial number of the CompactFlash card and the Article No. of the firmware option to be enabled. With this information, you can purchase the associated license code from a license database and enable the firmware option. The license code is only valid for the CompactFlash card declared and cannot be transferred to other CompactFlash cards.

¹⁾ For further information see http://support.automation.siemens.com/WW/view/en/104020669