CP 1243-8 IRC COMMUNICATIONS- PROCESSOR FOR USE OF SIMATIC S7-1200 IN SYSTEM TELECONTROL PROFESSIONAL; FOR SINAUT ST7; STATION TYPE: RTU; WAN INTERFACES: 1) ETHERNET, 2) EXPANDABLE IN ADDITION WITH TS MODULE RS232 OR TS MODULE MODEM OR TS MODULE GSM OR TS MODULE ISDN; BETRIEB MIT TIM-MODULES POSSIBLE.
588.30 ?
CP 1243-8 IRC
The CP 1243-8 IRC communication processor (Industrial Remote Communication) is used for connecting a SIMATIC S7-1200 in the TeleControl Professional system via the SINAUT ST7 telecontrol protocol to higher-level ST7 stations or to an ST7 control center.
The CP has the following features:
SINAUT ST7 telecontrol protocol supported
Two WAN connections for selecting the communication paths:
Ethernet-based connection: RJ45 port on the module for connecting external routers, e.g. SCALANCE M
Additional connection configurable via plug-in TS modules
Both WAN interfaces can also be operated simultaneously: Route redundancy
Data transfer optimized for telecontrol systems on the basis of SINAUT ST7
Automatic transmission of alarms per e-mail or SMS
Time synchronization based on NTP (Network Time Protocol) or via the SINAUT system
Data buffering of up to 16,000 data messages prevents data loss in the event of temporary connection failures
Secure communication via VPN connections based on IPSec
Access protection via Stateful Inspection Firewall
Fast and simple diagnostics via clear LED indicators, STEP 7 and web browser
Compact industrial enclosure in S7-1200 design for mounting on a standard mounting rail
The integrated Ethernet interface and the option of using the TS modules provide flexible connection options for the CP. The following TS modules are available:
