6ES7972-0ED00-0XA0

Цена на сайте указана розничная в ЕВРО без учета НДС.
Для уточнения цены и размера предоставляемой скидки - звоните или присылайте заявки

Commissioning support and remote diagnostics with SINUMERIK Operate

SINUMERIK Integrate Access MyMachine /P2P supports the commissioning of machines with SINUMERIK Operate (software version 2.6 and higher) using a standard Windows PC. Its scope of functions includes the exchange of files between the service PC and the control as well as operation of the HMI user interface. EasyScreen texts, alarm texts, tool management texts and other texts can be edited easily.

The file exchange functionality permits access from the NCU to files stored on the CF card and to files in the NCK. Various user profiles are also supported.

The file exchange only requires the Access MyMachine /P2P software, This is installed on the PC (direct access via X127 without a TS adapter does not need the option RCS Host 6FC5800-0AP30-0YB0).

If remote access, e.g. via modem, to the HMI user interface is required, the approved modem for this application is the TS Adapter IE (2 versions: analog and ISDN telecommunication networks, only via the service interface X127) (requires option Access MyMachine /P2P RCS Host 6FC5800-0AP30-0YB0).