3ZS1316-4CC10-0YA5

Цена на сайте указана розничная в ЕВРО без учета НДС.
Для уточнения цены и размера предоставляемой скидки - звоните или присылайте заявки

SIRIUS Safety ES is the engineering software for the configuration, startup and diagnostics of the 3RK3 Modular Safety System and 3SK2 safety relays. The software combines hardware configuration, safety function parameterization, and safety system testing and diagnostics.

Hardware configuration

The device configuration of the 3RK3 or 3SK2 systems is defined in the configuration dialog. The available modules are simply selected from the clearly laid out hardware catalog and positioned in the workspace. Depending on the device system used (3RK3 or 3SK2), only the permitted devices in each case are shown in the hardware catalog. In the case of the 3RK3, the quantity framework on the AS-i bus can moreover be obtained online or configured manually from the AS-i library. For each module, it is optionally possible to issue an equipment ID which is shown in the logic diagram for identification of the inputs and outputs.

Definition of the hardware layout

Graphic parameterizing of the safety logic by Drag&Drop

The functionality of the safety logic is laid down with a graphics editor designed for intuitive operation. Safe monitoring functions (EMERGENCY-STOP, non-contact protective devices/light arrays, protective doors, etc.), output functions and logic functions (AND/OR operations, counting functions, time functions, etc.), non-safety-related input/output functions, device status functions and control functions can be dragged from the extensive functions catalog onto the work interface by drag&drop. Depending on the version, each function has several input and output connecting points through which the functions can be interconnected by simple mouse clicks. Double-clicking on a function symbol opens the associated properties dialog in which all the parameters can be displayed and configured, e.g. scope of the function's inputs and outputs, channel type configuration (single/two-channel, NC contact/NO contact), activating cross-circuit detection, defining start options, assignment of hardware inputs and outputs, etc. Each function can of course also be issued with an individual name so that e.g. the position of a safety switch in the plant can be documented.

The safety logic can be divided into several diagrams in order to enable structured processing of the entire plant. The user can freely position the functions on a practically infinitely large drawing board. Connecting lines are drawn automatically. If there is not enough space, more pages are automatically added to the diagram in horizontal or vertical direction. Connecting lines extending over several page are automatically cross-referenced during print-out. If required in the interest of clarity, the user can divide a connecting line manually into two segments, whereby the mutual reference is marked by reference arrows. Freely creatable comments can be placed at any point in the diagram for the purpose of further documentation. Every point in the logic diagram can be processed with ease by dragging and zooming. Every project can be saved as a file and be protected from unauthorized access with a password.

Processing the safety functions in the graphics editor

AS-Interface

Evaluation of the AS-i slaves connected to the AS-i bus is also parameterized using the tried and tested method described above. In order to be able to use the AS-i functionalities, a 3RK3 Advanced central unit or 3RK3 ASIsafe central unit (basic/extended) must be used.

User prompting during start up and maintenance

To start up the respective safety system, the created project file is uploaded to the device. There are two ways of doing this:

• Connect the serial interface (COM) or USB interface of the PC to the device using a special connection cable
• Use the DP interface to download the parameterization through any PROFIBUS node.

A password concept with various levels of protection allows for access to the device to be restricted.

After the project is loaded, the user switches the device by means of the software from configuring mode to test mode in which the safety functions are tested.

Activating the diagnostics shows the status of the individual functions in the graphic logic diagram by means of different colors and symbols. In addition, the signal status of each input and output can be manually overwritten ("forcing").

If the test is completed successfully, the user releases the configuration and switches the device to safety mode, in which case "forcing" is automatically deactivated.

Service personnel can activate the graphic diagnostics in safety mode as well. The I&M (Identification & Maintenance) data saved in the device facilitate maintenance.

Efficient engineering with three program versions

? Function available

-- Function not available

Additional functions

• The program interface language can be switched during use between German, English and French
• A context-sensitive help function provides useful assistance with questions concerning the use of the program
• A consistency check provides clear information about function assignment errors and the user is taken directly to the error when the corresponding message is clicked on. Checks are carried out automatically when a project is saved and during the configuration test, but they can also be initiated manually.
• Lists of symbols and cross-references can be issued for effective processing of the project file
• Standards-compliant printouts:
  The programs of the SIRIUS ES software family make machine documentation far easier. They enable parameterization printouts in accordance with EN ISO 7200. The elements to be printed are easy to select and group as required.

Types of delivery and license

SIRIUS Safety ES is available with the following licenses:

• Floating license
  • Package contains the software on CD and a floating license on a USB stick
  • The software can be installed on any number of PCs
  • A floating license enables the software to be used by 1 user; after use on one PC, it can be transferred to another
  • The CD also contains a trial license for test and evaluation purposes (free use of all program functions on any PC for a period of 14 days).

The following delivery variants are additionally available for SIRIUS Safety ES:

• Powerpack
  Special pack for switching within the same software version to a more powerful version with more functionality, e. g. Powerpack SIRIUS Safety ES for switching from Basic to Standard and from Standard to Premium.
• License download
  Simply download your new software and license key from the Internet via the Online Software Delivery (OSD) platform. After you have placed your order in our Mall, you will receive your access data by e-mail, which will allow you to download the license or software you have ordered.

For more information, seehttp://www.siemens.com/tia-online-software-delivery

The software can be downloaded free of charge from the Internet (without floating license), seehttps://support.industry.siemens.com/cs/ww/en/ps/21192/dl

The download file also contains a trial license for test and evaluation purposes, which allows free use of all program functions on any PC for a period of 14 days. A floating license is needed to use the software after the 14 days.

Note:

Existing MSS ES licenses can continue to be used with Safety ES.

System requirements