6AU1810-1JA20-5XA0

Внимание! Указаны цены архивного каталога СА01. Для уточнения актуальной цены перейдите по ссылке заказного номера товара или перейдите в каталог СА01 2016

The user-friendly STARTER commissioning tool can be used for:

• Commissioning
• Optimization and
• Diagnostics

This software can be operated either as a standalone PC application, integrated in SIMATIC STEP 7 with TIA compatibility via Drive ES Basic, or it can be integrated into the SCOUT engineering system (for SIMOTION). The basic functions and handling are the same in both cases.

In addition to the SINAMICS drives, the STARTER also supports MICROMASTER 4 devices.

The project wizards can be used to create the drives within the structure of the project tree.

Beginners are supported by solution-based dialog guidance, whereby a standard graphics-based display maximizes clarity when setting the drive parameters.

First commissioning is guided by a wizard which makes all the basic settings in the drive. Therefore, getting a motor up and running is merely a question of setting a few of the drive parameters as part of the drive configuration process.

The individual settings required are made using graphics-based parameterization screens, which also precisely visualize the principle of operation of the drive.

Examples of individual settings that can be made include:

• How terminals are used
• Bus interface
• Setpoint channel (e.g. fixed setpoints)
• Closed-loop speed control (e.g. ramp-function generator, limits)
• BICO interconnections
• Diagnostics

For experts, the expert list can be used to specifically and quickly access individual parameters at any time. An individual compilation of frequently used parameters can be saved in dedicated user lists and watch tables.

In addition, the following functions are available for optimization purposes:

• Self-optimization of the controller settings (depending on drive unit)
• Trace
  (depending on the drive unit, this is not supported for
  
  • MICROMASTER 4
  • SINAMICS G110
  • SINAMICS G120 < firmware V4.4
  • SINAMICS G110D
  • SINAMICS G120D)

Diagnostics functions provide information about:

• Control/status words
• Parameter status
• Conditions of use
• Communication states

Performance features

• User-friendly: only a small number of settings need to be made for successful first commissioning: the motor starts to rotate
• Solution-oriented dialog-based user guidance simplifies commissioning
• Self-optimization functions reduce manual effort for optimization

Minimum system requirements

The following minimum requirements must be complied with:

• Hardware
  • PG or PC Pentium III min. 1 GHz (recommended > 1 GHz)
  • Work memory 1 GB (2 GB recommended)
  • Screen resolution 1024 ? 768 pixels, 16?bit color depth
  • Free hard disk memory: min. 3 GB
• Software
  
  • Microsoft Internet Explorer V6.0 or higher
  • 32?bit operating systems:
    Microsoft Windows Server 2003 SP2
    Microsoft Windows Server 2008
    Microsoft Windows XP Professional SP3
    Microsoft Windows 7 Professional incl. SP1
    Microsoft Windows 7 Ultimate incl. SP1
    Microsoft Windows 7 Enterprise incl. SP1 (standard installation)
  • 64?bit operating systems:
    Microsoft Windows 7 Professional SP1
    Microsoft Windows 7 Ultimate SP1
    Microsoft Windows 7 Enterprise SP1 (standard installation)
    Microsoft Windows Server 2008 R2